Question about Heating & Cooling

1 Answer

Siemens underfloor heating control panel clock keeps resetting

The clock keeps resetting and so the floor heats up at the wrong times. I've asked Siemens but they've said it's steam in the bathrooms. Why on earth they didn't make a mention of that is beyond me, because the control pad could have gone in the wardrobe. All the same, even when there's no steam the thing resets. I rang Siemen's again and was told to *bring it in*. I informed them that it's wired in and I'm not an electrician. She said to get an electrician to take it out so I could bring it to them, but there's no guarantee they could fix it. Man, talk about Mohammad and the mountain. Anyone else had this problem?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

A common problem with a particular batch of thermostats, We have sold hundreds of them .The reset occurs with high humidity eg steam. This resets the unit. The solution is to use circuit board sealant on the back of the circuit board and problem disappears forever.

Posted on Jul 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Underfloor heating not working


Along with warming up the entire area, people also look to warm up the floor, which can otherwise be harshly cold. Underfloor heating sdystem is the most consistent form as it evenly warms up the complete open space. Infrared Heater Room Heater IR Heater Magneto

Jan 26, 2014 | Heating & Cooling

1 Answer

Home comfort protection plan


Direct Energy knows that maintaining your Texas home is essential to your family's well-being. You can't afford to put off protection until disaster strikes, so we've created protection for your home's electrical, plumbing, and heating and air conditioning systems.

Our home protection plans deliver security by combining preventive and repair services for your home's most fundamental systems, including:

Electrical wiring
Plumbing lines
Priority scheduling with us for all appointments
Surge protection
Heating and cooling systems


Our home protection plans remove the anxiety of unanticipated costs, while our certified technicians are ready to assist you with respectful, professional service and high-quality equipment. Because we view the money you spend on home service improvement as an investment in your home and your comfort, we're committed to helping you make it worthwhile. You can choose from our plans for Heating and Cooling systems, Electrical wiring, and Plumbing lines. Direct Energy's Repair & Maintenance Essentials Plan provides annual features to catch small service issues before they become critical, $500 insurance for every repair job*, emergency customer support any time you need it, service visits with no charges and no deductibles, and so much more.
if you want protect your roof leaks so you can apply EPDM Coatings :
Watch Corporate Video

Jan 20, 2014 | Audio Players & Recorders

1 Answer

Underfloor heating wont stop running


Look for a stuck relay that controls the pump

Dec 30, 2013 | Hunter Mechanical Heat & Cool Thermostat...

1 Answer

Siemens underfloor heating keeps flashing 0.5degrees & the floor is HOT! What is wrong?


There is a good possibility that the controller is not set up properly.

The instructions are on the web.

Jun 02, 2012 | Computers & Internet

1 Answer

I have just installed underfloor heating with 4 zones. I also have the existing radiator system. The radiator system is currently programmed to come on and off twice a day but has no room thermostat. We...


You say you have3 rooms on the underfloor system that will probably require different temps. You said you have 1 zone valve for the under floor system. You can not control all the rooms with different thermostats and only 1 zone valve. You need more information and professional help here. I can give you more advice too...

Jun 22, 2009 | Honeywell Programmable Thermostat Heater

1 Answer

Siemens underfloor heating sdosent work I set the program or put it on continuous and the tiled floor dosent get any hotter


check your circuit breakers to see if the floor is getting power to it. Consult your operation guide to see if there is an internal fuse.

May 30, 2008 | Heating & Cooling

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

814 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

3087 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...