How do you remove the glass from the shelves for cleaning. I have a kenmore three door fridge and spills get between the frame and the glass shelves

Kenmore Elite 27.6 cu. ft. French Door-Refrigerator - Cool Style and Storage.

Offering 27.6 cu. ft. of storage space, this Kenmore Elite French door refrigerator 7105 has all the functionality you need with the contemporary look you want. Features like the full-width temperature-controlled Full Width Pantry Drawer, deep door bins and slim in-door ice dispenser are designed to save space while providing optimum organization. GeniusCool™ and Multi Air Flow technologies work together to keep food fresh with digital temperature control and refined air circulation. The pull-out freezer drawer provides 8.79 cubic feet of frozen food storage with separate temperature and humidity controls.

• Built to store food, snacks and more, this Kenmore refrigerator delivers plenty of storage capacity so every item on your grocery list has a spot.
• A full-width, gourmet pantry drawer stores party platters, pizzas, pies, trays and more while clearing shelf space for better organization and easier storage.
• Spill-proof tempered glass shelves keep drips, drizzles and spills from spreading throughout the fridge, making cleanup fast and easy.
• A built-in water filtration system helps reduce contaminants such as chlorine, lead and mercury, for great-tasting water and ice that's better for you.
• Electronic controls combined with a digital display means quick temperature readings and push-button adjustments that are tailored to fit whatever food you're storing.
• Designed to stop icy build-up, automatic defrost uses a heating element to gently raise temperatures and reduce compressor ice, while keeping your food cool and safe.

I seem to be having the same issue with a Maytag refrigerator model M1TXEGMYS01. I would like to thoroughly clean all shelves of this new-to-is refrigerator but I can’t seem to figure out how to remove the glass from the plastic housing. I was able to take the end and central brackets off (that hold the drawers) but I can’t figure the rest of it out... and the manual I looked up didn’t provide any information on separating the housing either. Please see pic attached. Thanks in advance!

glass shelves you can get cut from a glass suppler or window shop
if you have the measurements you may get wire shelving from a fridge service agent spares or cut wire fencing to size and have the parts powder coated to prevent rust
even aluminum security doors cut to size may do the trick

Well, I don't know about the individual shelves, but for the long glass shelf above the crisper drawers, there are two white clips located at the back edges of the glass that need to be pried out with a knife blade, or something similar. Place your blade in between one of the grooves of where the clip meets the plastic frame (and, NOT between the clip and glass! ) and pry the clip with a bit of a sideways motion. It's a little stubborn, but if you break a clip, don't worry, you really don't need it for the shelf to function.

Anyway, after you pry up the two corner clips, lift and slide the glass toward the back to get it out of the front groove, and voila!, the glass comes right out.

Good luck!

defrost timer is bad

On my Kenmore (795.7555* made by LG) French door, the adjustable shelves are removed by tilting them up and then bringing them forward. The sliding shelves and drawers just pull forward.

Which model LG refrigerator do you have? There may have been design changes between your fridge and mine. Please add a comment with the information for specific instructions.

I hope this helps.

Cindy Wells
(I didn't bother to give the full model number of my fridge since the directions also apply to the 795.7519* and 795.7554*)

You can take them off the door by lifting up and out at an angle but do not try to disassemble them. You can soak them in hot water to try and get rid of spills in the seams.

Open the door to the first notch. Lift it straight up off the hinges. Next, you'll have to dismantle the door. Remove all the screws around it and the glass will be held in by another frame. Unscrew the frame, clean the window and reverse for reassembly.

While waiting for someone else to answer my question, I fiddled around with the door parts. I managed to reassemble them! Here's how:

1. start with the glass panel. Slide the glass panel into the slot at the bottom of the front door frame on the stove.

2. next attach the handle. There are slots on the bottom of the handle that fit into the top of the glass panel. Slide the handle slots into the top of the glass panel.

3. screw the handle onto the oven door using the predrilled holes on the inside face of the oven door.

4. last, attach each of the two side trim strips. Slide the top of each strip into the bottom of the handle on each side of the oven door. Then slightly bend the strip outwards so that they are short enough to fit into the bottom slot of the oven door frame on each side of the glass panel.

Don't have one here at home to look at, but the best way to go about that would be to remove the door from the range to work on in on a table, allowing access to any screws at the bottom of the door for disassembly and easier reassembly. To remove door: open oven door. Use a small screwdriver to poke in the small rectangular hole on the hinge and flip down the little lever toward the door. It is mostly hidden at the top of the rectangular hinge opening in the range frame. (do both hinges) Now with the levers down (locking the door hinge) you can lift and pull the door a bit, removing the door and hinge in one unit from the range body. Sounds more difficult than it is. It really only takes 10 seconds. To replace the door, just reverse procedure, remembering to flip the little levers back up after attaching door to range frame.