Question about GE WJSE3110A Top Load Washer

1 Answer

Washing machine noisey when drum turning

Hi there. My hotpoint is making a funny noise when the drum turns.  It started with a full wash and only on spin but now happens if only one item in it and whenever the drum turns, in spin or wash cycles.  It sounds like it is a mix of a grinding/clicking noise but not like something is rubbing against the drum.  Is this the bearings?
thx :)

Posted by on

  • anna_passi May 19, 2009

    Hi -it's a Whirlpool...

  • Edgareltopo May 11, 2010

    Hello anna, what kind of washer do you have?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 187 Answers

Hi, Try these out:

  1. Balance the load
  2. Level the machine
  3. Inspect the water pump for a blockage
  4. Inspect the coupling
  5. Inspect the transmission
  6. Adjust the drive belt tension
  7. Check the motor bearings
  8. Check the drum brakes
please rate my suggestion...

Posted on May 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint aquarius wml760 noisey when spinning with stuff in but ok empty


more than likely the rear bearing has gone bad and when a load is applied the difference in weight distribution causes the knocking.

Jun 15, 2012 | Hotpoint Washing Machines

1 Answer

Black powder and noisey spin on hotpoint washing machine


Black powder sounds like brushes are wearing down. If noise is severe, suspect bearings. With door open try wiggling the drum up and down. If it moves inside the tub, replace the bearings. Try new brushes first!

May 15, 2012 | Hotpoint Washing Machines

3 Answers

Trouble shooting the hotpoint aqualtis aqxxf149pi flashing f08


my hotpint aqualtis aqxxf149pi make a funny grinding noise when it spins help please?

Jun 25, 2009 | Hotpoint Washing Machines

1 Answer

Fault code stopping washer from working


My washing machine will not spin and in fact turn around at all, i did a wash earlier and it was making a funny noise...like some thing was caught in the drum. It is about 3 years old....It does still fill with water thou!

May 24, 2009 | Ariston Technologies Washing Machines

1 Answer

Working but making noise when spinning.


  • Hi,
  • Try these:
  1. Balance the load
  2. Level the machine
  3. Inspect the water pump for a blockage
  4. Inspect the coupling
  5. Inspect the transmission
  6. Adjust the drive belt tension
  7. Check the motor bearings
  8. Check the drum brakes
please rate my suggestion....

May 19, 2009 | Hotpoint Aquarius WD63 Front Load...

1 Answer

WF340 hotpoint aquarius WASHINING MACHINE


Hi, Remove the drive belt from the drum & motor then turn the drum be hand, Is it noisy? if it is then the drum bearings need replacing i have used this website before and they are very good.
http://www.candmdomesticappliances.co.uk/section.php/88/1/hotpoint-washing-machine-spare-parts

Apr 22, 2009 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Noisey washing machine


i had the same problem check the holes inside the drum for a bra wire stuck in one of them which was my problem we also thought the bearings had gone but they were not hope this helps

Oct 15, 2008 | Hotpoint Aquarius WF000 Front Load Washer

2 Answers

How to replace drum bearing for hotpoint aquarius+ wf740


My machine is just over 3 years old and although there is no play in the rear drum bearing it is very noisey on spin.
It gets progessively loud the faster the spin speed.

Jun 18, 2008 | Hotpoint Aquarius WF000 Front Load Washer

Not finding what you are looking for?
GE WJSE3110A Top Load Washer Logo

563 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...