Re: Rings a couple of times then goes to message bank
That's controlled by your service provider, give them a call, they may be able to control the amount of time before it rolls to the message bank. If it's a GSM phone, you can set that yourself, like so:
To get the current call forwarding status, enter *#61#[SEND] into your phone.
Write down the number(ignore the +1), this is the phone number that your calls are currently being diverted to.
into your phone using the phone number (numbers only) as reported by
the status & the delay can be set to (5, 10, 15, 20, 25, or 30)
To verify that the settings are correct, enter *#61#[SEND] into your phone.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi, im not sure on your exact model but you need to change the call diverts, so its something like this, 1 go into settings 2 call settings 3 call diverts 4, no in here it has options like divert when busy, etc etc, it should also divert when not answered, click on this and choose status and it will tell you what its set to, then it should give you the option of changing the settings, some let you change to 30sec before answer, give me a shout back if you get stuck and ill find out how the menu works on your phone and talk you through the process
You will need to open the menu > call divert and cancel the settings of diverts.
Once this is done the call will be recieved.
if there is further issues check your SIM on anther phone and is this repeats call the service provider.
dial **61*(the your message bank number)**30# this will extend the time it takes for your phone to divert to message bank to 30 secs. If you dont want message bank you can cancel call diverts in your seetings menu after putting in this code and it will still ring for 30 secs. Note: this does not work for Vodafone Australia
to stop the pixma from picking up even after the phone line has been picked up you need to ensure the telephone line is connected to the LINE port and not to the PHONE port on the back... the PHONE socket is if you wish to connect a phone line to the same socket Thru the pixma. (passthrough)
not sure how to stop the pixma picking up on the first ring though..... are you sure that you are SAVING the setting change.....?
Hi it sounds like your problem is that the call diverts are set to divert all calls what you need to do is goto settings then goto call settings then look for call divert settings what you need to do is cancel all diverts and then go through them one by one and just activate divert if off (activating this one goes to ans phn if phn off activate divert if busy ( goes to ans phn if your on phone call) activate divert if out of reach (goes to ans phn if no signal) After doing these settings then your phone should ring when someone calls you. Before you activate any divert setting select cancel all diverts then get someone to ring you and make sure phone rings the screen will now display whos callind and the phone should also ring. Let me know if you need further assistance ok let me know how you get on