Question about Cameras

Open Question

Hello kitty camera model #hec008l. computer continually tells me there is a connection error so am unable to download my daughters photos. Have tried different USB cables but no joy. Anybody out there

Have installed the drivers as found on the support page so at a complete loss as to why no connection though am suspicious it only uses a USB 1.1 connection which seems years out of date?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Unable to download through usb

I had the same problem and realized that my computer wasn't recognizing my camera. I went through my device manager and looked under portable devices, I could see that my camera had an error in its driver, so I right clicked on my camera and uninstalled the driver for my camera, and unplugged and plugged my camera back in. It instantly recognized my camera and reinstalled the driver.

Posted on Jan 13, 2008

Ad
  • 1 Answer

SOURCE: Vista not recognising Olympus camera on USB connection

I just spoke to Olympus Tech Support.

You have to download Olympus Master 2. (Their program is no longer called Camedia Master.)

http://www.olympusamerica.com/cpg_section/oima_softwareMaster.asp

At their main site, search for olympus master 2.

Posted on Apr 02, 2008

MrsJGreen
  • 130 Answers

SOURCE: Canon PowerShot SX100 is : Need

Here are the steps to take.

1. Establish whether or not you have a connection between your camera/computer by going to your start button, control panel, system, hardware tab and device manager. The camera must be powered on and in playback mode (should automatically go to playback mode when connected, camera's screen should go black if there is a connection). Make sure you have a fully or nearly fully charged battery in your camera.

2. Once in device manager, look under Imaging Devices. If your camera is properly connected it should show up as Canon Powershot SD800. If it shows a yellow exclamation point, there is a driver issue, and even if it doesn't show a yellow exclamation point, you may want to update your driver anyway by right clicking and having the system search automatically for driver updates. If download of driver begins, great...once finished, restart camera and your problem may be resolved.

3. If there are any other imaging devices, you may have to temporarily disable them to avoid conflicts.

4. If you have any other imaging software running, exit or close the program in your system tray (down by your clock in the right hand corner of your computer's desktop.

5. Try again to connect.

6. If you are on a desktop, try a rear usb port vs. a front port. You can also try a different port on a laptop. After each change, try restarting camera to establish connection.

7. Go to start/My Computer and look for the icon for your camera...you will be able to download images even without Canon software loaded onto computer so this is not a software issue if you have no hardware connection. If you see the icon, right click on it and choose Get or Import pictures. From there the default Microsoft scanner and camera wizard should launch and you will be able to import your images.

8. If still no connection, try going to Start/Run and type in services.msc here you are looking for 4 services to be running. Check under status of each service and make sure it reads that each of these services are started.

  • Canon Camera Access Library 8 (if Canon software loaded)
  • SSDP discovery service
  • Universal Plug and Play Device Host
  • Windows Image Acquisition
Once all of these services are started on your computer, restart camera once again. If any of the last three services are not on your computer or are not started, connecting will be a problem.

If all of these steps fail, try purchasing an SD card reader from your local electronics store for around $12 and download images from there. Canon also offers lifetime technical support for your Powershot, so give them a call if none of these steps work or if you would like someone to walk you through it.

Best of luck to you!
MrsJGreen

Posted on May 30, 2008

leethedeuce
  • 4472 Answers

SOURCE: KODAK C613

Click here, select your operating system and download the software and drivers, then see if it works you may just have a bad disc.
Good luck,
Lee

Posted on Jun 15, 2008

SOURCE: Driver for Digital Camera Hello Kitty 3.2 #KT7009A

Customer support
http://www.spectraintl.com/customer_service.htm

Posted on Apr 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I plug in my cord to download pictures it is telling me there is a USB error, so I am unable to download pictures to my computer.


Try NOT connecting your camera to your computer.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

Aug 24, 2011 | Samsung BL103 Digital Camera

1 Answer

Problem with the Olympus FE-115 Digital Camera my


Unfortunately, the picture error message means that the image been modified such that the camera can't read it. It is possible that the camera thinks the picture was taken by another camera. Since the picture is still good when you check it with the computer, it hasn't been damaged. Archive the picture and make sure to back it up after it goes on the computer. (If the computer couldn't view it, then you'd need some sort of file recovery software and might not get the entire image back.)

Manuals for the FE-115 are available from the Olympus site: http://www.olympusamerica.com/cpg_section/cpg_archived_product_details.asp?id=1227&fl=8 .

I hope this helps.

Cindy Wells

Mar 10, 2011 | Olympus FE-115 Digital Camera

1 Answer

Will not download


Use a card reader instead of your camera.

Dec 21, 2009 | Canon Powershot SX110 IS Digital Camera...

2 Answers

How do I work this camera please or find a manual for it, thank you, Marcella


The hello kitty camera is a sakar product. I would recommend going to www.sakar.com for contact/support information. The may be a possibility to download a manual or have one mailed.

Apr 19, 2009 | Cameras

Not finding what you are looking for?
Cameras Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...