Question about Epson AcuLaser C1900 Printer

2 Answers

EPSON AcuLaser C1900 with Error "Service Req E020"

I have a Color Laserprinter EPSON AcuLaser C1900. When I turn on the printer there is a jarring noise near the green dial behind cover AB and there comes an Error message "Service Req E020" after Initialization. After that the printer stops and do nothing. Does anybody have a solution for that?
Thanx for any advices

Posted by on

  • tigertail
    tigertail May 11, 2010

    Open the front cover of the printer. On the frame to the right of the cartridges there is a hole with a circular piece of plastic inside. Push this plastic piece in with a pen or pencil and check that the cartridges can be rotated by hand. Also check that the plastic piece on the front door has not been broken off as this should line up with the hole and pushes in the circular bit when the door is closed.



    Do the cartridges rotate and is the door catch complete?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

ERROR CODE: E020
“SECONDARY TRANSFER VOLTAGE CONTACT/RELEASE PROBLEM”
Solution
�� Electric parts which can cause the trouble:
• Transfer Roller Pressure Solenoid (SL2)
• Transfer Roller Pressure Position Detection Sensor (PC7)
• Engine Board (PWB-A)

Posted on Sep 06, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have problem with Epson AcuLaser C 2000 service req 020

Posted on Jul 25, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

PRINTER SHOWING 'SERVICE REQ E300'


Sadly this is a serious error requiring a replacement Laser Unit - if you are lucky. It may also be a system board error that is falsely reporting the error.

This printer is likely to be beyond economical repair.

Aug 22, 2012 | Epson Aculaser C3800 Transfer Unit

1 Answer

Service req E020 what is that


problem due to failure of software

Mar 30, 2011 | Epson Aculaser C1100 Printer

1 Answer

My epson c2000 printer have a "service req e033"


Because the Epson AcuLaser Color 2000 was made for Latin America, there's not much information that I can give you concerning your Service Error Condition. All I can tell you is that the Service Request error # E033 is an Engine Related Service Call Error Message for OHP Detection Sensor Malfunction [abnormal condition]. Check to see if the windows on the OHP sensor are dirty and clean OHP sensor window and the OHP sensor reflective window. I'm sorry, but I can't even tell you where the OHP sensor is located, or anything else about it. If you cannot figure it out using your Owners Manual/Users Manual, you can always e-mail Epson Technical Support for possible help or advice, at epson.com

Mar 10, 2011 | Epson AcuLaser C2000 Printer

1 Answer

What does error code EO23 mean on an Epson Aculaser C1900


this error refers to a misalignment of the carousel, i have one that randomly does it at the moment, i also have a replace black toner even though the toner is full, i'll get back to ya when i find a fix, the service manual says it can either be the 2nd motor, clutch or sensor, but in my case all three are working fine.

Oct 07, 2009 | Epson AcuLaser C1900 Printer

1 Answer

Service Req C0302


CPU Error. Mainboard is faulty.

Jul 04, 2008 | Epson AcuLaser C1900 Printer

1 Answer

Service require E008


E008. Is a Main Motor Problem.
Main Motor, Engine, power unit

E021. Transfer Belt Cleaner Contanct/ Rease Problem.
Cleaner pressure flapper solenoid, Belt cleaner detect sensor, engine PCB.

Make sure inside on unit, has no toner spilled in it.

Feb 14, 2008 | Epson AcuLaser C1900 Printer

1 Answer

Epson AcuLaser C1900 starts printing too low


I have a C1900 with an error "Service Req E021". I appreciate any help as to what this refers to please.

Jan 05, 2008 | Epson AcuLaser C1900 Printer

1 Answer

Epson Aculaser C1900


The Cleaner Pressure Flapper Solenoid it dead or dying. You can try moving it by hand to see if you can prolong it, but basically it needs a new one. Its a job for an engineer really.

See the image below for it's location.

Sep 17, 2007 | Epson AcuLaser C1900 WiFi Printer

Not finding what you are looking for?
Epson AcuLaser C1900 Printer Logo

Related Topics:

3,746 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...