Question about Linksys Wireless-G WRT54G Router

2 Answers

CONNECTIVITY WHILE I WAS AWAY MY WIFE HAD HER LAPTOP SETUP TO RECEIVE THE LINKSYS SIG AND WORKS FINE.MY NEW LAPTOP WILL NOT RECOGNIZE THE SIG.HELP !!!!

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 244 Answers

Hi twildbill5,

Try to check the status of activity packet sent and received from your new laptop connected to LINKSYS, if this activity does not increasing, please proceed this procedure.

1.) Open your wife laptop make it sure it is working with LINKSYS and try to get info of the assigned  IP from your network properties TCP/IP.

2.) Copy the IP Address, Subnet, Gateway, primary DNS, and alternative DNS.

3.) Then paste it into your new laptop network properties.

4.) Then return the LINKSYS to your new laptop and try to browse the internet.

If still the problem persist please give me the following details I need to troubleshoot.

a) What is  operating system did you used from the old one and the new one laptop.
b) What is the name of your anti-virus installed?

Hope you enjoy my solution. Don't be hesitate to post again further question's you need I am glad to help you.


Best Regards,


Philip

Posted on Oct 24, 2007

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 110 Answers

Your new laptop,

Are you searching for a new wireless network? Then your router doesn't show up on the list of networks?

I can rephrase if need be.

Posted on Oct 18, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My laptop recognizes the wireless dlink and works perfect, my wife's laptap, we used for the installation cd for setup and it recognizes the dlink, but the internet doesn,t work. Her laptap has windows...


not very clear but this may help.
1) make everthing is connect physically....make sure modem is connected to your router....then check that your router is connected to your laptop...everthing physically.

2) after you made sure everthing is connected. look underneath the router and look for and something that start with http://192.168.0.1

3) now go to your laptop and open up your web browser and type http://192.168.0.1 ....select "Admin" as username and dont type anything for password. then click on "log in"

4) then when you log in. click on "setup"which should be on top of the page....then select "internet" from left side of the page.

5) click on "setup wizard"

6) Click "Launch Internet Connection Setup Wizard"
7) click next
8) setup ur password
9)select your time zone...the click on next
10) then if your internet connection isnt detected you will need to select the company that provides you ur internet...if u dont find it then select "not listed or dont know"
11) also make sure you select "DHCP Connection (Dynamic IP Address" click next
12) click on " clone your pcs mac address"
13) u dont have to type in "host name"...click next
14) next now the wizrd should b complted and "connect"
15) now u shoudl have internet on any computer that is physically connected to the router with a ethernet cable.....but no wireless internet yet....now we are about to set it uo

1) click on "setup" on top of the page
2) click on "wireless settings"
3) click on the box next to "Enale Wireless"
4) type in a name in "wireless network name" for example "gary's wifi"
5) in "802.11 mode" i suggest picking "mixed cause you might have 802.11b in an old laptop and 802.11n in the newer laptops....with mized mode they will all be able to connect no matterif they are b,g, or n
6) den click "save settings" on top of the page...and NOW your wireless device should be able to connect to your wifi...BUT....remember we didnt put a password...so anybody around your house will be able to use it....if thats find with your then your done....if not then select wat type of security you want wep,wpa,wpa....and make a password..hopes this helps....let me know how it went.

Feb 25, 2011 | D-Link DIR-615 Wireless Router

1 Answer

Printer not working from new router


First, I would suspect your PC has the printer installed using the IP address of the printer. I would uninstall the printer, then go to "add printer" then "add network printer" and see if this works. If not: HP has a neat setup available for their printers. Go to their website and look for network printer setup. This will install on your computer, and go through your network and find your printer.

Nov 30, 2017 | Apple AirPort Extreme Router

1 Answer

Wifi getting connected with new linksys


You need to call Linksys again for them to help you setup the other computer. For the none-working computer, you don't need to run the setup CD for the router. All you need to do is connect to wireless network like what you did on the working laptop.

Jun 26, 2009 | Linksys Wireless-G Broadband Router

1 Answer

Linksys WRT54G2 Wireless router works with some laptops


You may have setup the wrong wireless in the router. There are 4 flavours. a, b, g, and n. Take a look and see what you setup.

Nov 28, 2008 | Linksys WRT160N Wireless Router

2 Answers

Lg r 405 will not recognize wireless signal from lynksys wrt350n


hi i would suggest to access your routers setuppage and set the channel to channel 11.

make sure also if your wireless network is secured, type the correct key those things are case sensitive.

to access the routers setuppage go to a computers that is connected to your linksys router (wired) then launch IE on the address bar type 192.168.1.1(this is the routers ip) then it will ask you for username and password for the username dont type any thing for the password type admin.

when your on the setuppage click on wireless tab. while on the wireless page set the channel to 11.

after that click apply or save settings on the page.

then after that try to connect to your wireless network on your laptop.



for further help you can call linksys hot line 1800-3267114
they will surely help you with this.

hope this helps.

Oct 19, 2008 | LG X-Note LM50 Notebook

1 Answer

M675 Notebook Wireless Problem


yeppers..those are simply receivers, and sometimes, after a period of time, and vibration, and shock, they just lose some of their ability to tune into a signal. I've seen it in net cafes and inside wireless nodes too.

got backup for your Gateway?

Feb 12, 2008 | Gateway M675 Notebook

1 Answer

My laptop won't work wireless


Use windows network setup wizard to help in setting up your wireless. The wizard can search for your wireless. Some people believe you gan get away without using Linksys's software & I agree to a point. However Linksys believes to maintain a good connection you should install the software for the wireless router. You can download it from the link below. Check out the link "Learning Center". You might find it helpful. http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=1166859837401&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=3740137401B343
I suggest to all running a wireless connection to set up security with a password to keep freeloaders from tapping into your bandwith for free.
Luck!
Please vote...

Jan 23, 2008 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...