Question about Actiontec Qwest Model Q1000 4-port Wireless N Router

1 Answer

Actiontec q1000 setup

How do i set it up

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 320 Answers

Here is a general setup for this device, If further details are needed it is recommended to check the manual.

open a web browser on a computer connected to the device via a network cable (not wireless)
in the address bar type in 192.168.0.1

you will then need to login
the defaults are admin / admin for username and password.
You should then see the main configuration screen.
You may need to contact your ISP if special settings such as static ip, dns, or MAC address is needed.

Without knowing what exactly you need to setup, I would recommend going through each section and carefully reading what is on each page. Then modify ONLY those areas that you need.

Posted on Dec 28, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I download a manual for a Qwest Q1000 DSL router?


The technical page for this device can be found at:
Q1000 Actiontec Modems
It doesn't look like they provide a PDF of the entire user guide but links on this page (in 'Wi-Fi', 'Utilities', 'Advanced' and elsewhere) can guide you for more complex topics (such as port forwarding, etc.).

The Setup Guide can be found at:
CenturyLink Internet Manual English ZAM

May the Stars Shine Upon Your Path!

May 30, 2015 | Computers & Internet

1 Answer

How do I reset the password and User ID on an Q1000 Actiontec Modem?


Things You'll Need
• Q1000 Qwest Wireless N VDSL Modem Router
• Computer connected to the Modem
Step1 On any computer that is
connected to the Internet, type http://192.168.0.1 in the web
browser window and then press Enter.
Step2 Click Utilities.
Step3 elect "Restore Defaults" from the menu on the left.
Step4 Click the last restore button that follows
"Restore Modem to Factory Default State

The manufacturers web site with this advice is here.

http://www.actiontec.com/products/datasheets/Q1000QwFactoryDefaultsHowto.pdf

Sep 24, 2014 | Actiontec Qwest Model Q1000 4-port...

1 Answer

Wireless network no longer visible


The SSID field was turned off. Turn it back on.

Feb 22, 2014 | Actiontec Q1000 4-port Gigabit Wireless N...

1 Answer

Trying to connect to 192.168.1.1 to set up wii on Actiontec wireless router. can't do it. why?


It's probably the wrong ip address to setup the Actiontec wireless router. Try 192.168.1.254.

Dec 26, 2010 | HP Pavilion Desktop PC

1 Answer

My actiontec gt704wg wont work


1. Check the light status of the dsl or cable light
(solid).
2. Go through the basic setup and see if you have the correct settings.

May 22, 2010 | Actiontec GT704WG Wireless Router...

3 Answers

Kodak ESP 7 WIFI problems


The ACTIONTEC GT124, M1000 and PK5000 Routers are not compatible with wireless-enabled all-in-one printers. These routers cannot connect to your all-in-one printer because they do not support the multicast protocol. Contact your router supplier for additional assistance and to determine if your router will be able to support the muticast protocol in the future.

Feb 26, 2010 | Kodak ESP9 All-in-One w/USB Cable & 4x6...

1 Answer

How do i connect my actiontec GT704WG to my ATT dsl ?


You need to input your AT&T user name and password in the router's setup page and set the modem to PPoPE.
Here is the user manual: DSL setup is on page 26

http://safemanuals.com/user-guide-instructions-owner-manual/ACTIONTEC/GT704-WG-_E

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Apr 07, 2009 | Actiontec GT704WG Wireless Router...

1 Answer

Forgot my user name and password


The default username for the router is admin all lower case. The default password, is blank.

Try this first - if that does not work, you will have to set the router back to factory defaults, then do any setups on it that you had before.

To perform a reset on the Actiontec - Press and hold the reset button on the back of the Gateway for 15 seconds. This will reset the unit back to its factory default settings.

Mar 29, 2008 | Actiontec GT704WG Wireless Router...

4 Answers

GT704-WG with Verizon firmware


I just flashed my verizon modem FT704-WG with the actiontec update upgrade301060gt704wg.img. I then selected "Obtain an IP Address through DHCP" and bam away we go... working better than verizons version.

Jan 21, 2008 | Actiontec GT704WG Wireless Router...

Not finding what you are looking for?
Actiontec Qwest Model Q1000 4-port Wireless N Router Logo

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Actiontec Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an Actiontec Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...