Question about Schaerer Siena Espresso Machine

1 Answer

Motor time out - Schaerer Siena Espresso Machine

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

Must be the brew motor which drives the brew unit or Automat.
First step is to remove the brew unit and check how freely it can move up and down. If it is quite stiff there is probably a coffee build up behind the chamber, you can take it apart and clean it, then grease the black auger at the top and bottom before putting it back together.
If the unit is moving freely, then the chances are its a fault with the motor and will need to be replaced. The motor is what drives the gear wheel that the brew unit sits down on to....
Hope this helps.

Posted on Mar 20, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Experiencing abnormal sound from motor


Your problem is likely the bearings in the motor shaft which wear with time. These are not usually replaceable by the owner. As the bearings warm up the noise lessens. In time the motor will burn out because of the bad bearings. If you can get motor our look for an electrical shop that rebuilds motors. The bearings are cheap but labor will be main cost. Time for replacement only about 15 minutes.

Jul 18, 2014 | Exercise & Fitness

1 Answer

99 pontiac grand am se series 3400 liter motor i need to replace the water pump do you have to take the timing chain cover off to it looks like its all connected together


go to the library and get a book for your car with the motor you have in it.this should be a (sohc)single overhead cam motor and not the (dohc)dual overhead cam motor.the sohc motor the pump is located at the rad side of the motor and doesn`t need to have the timing cover removed.if it happens to be the dohc motor then your best to have a shop do the job as its not an easy job to do








this should be a (sohc)single overhead cam motor.this pump is located at the front of the motor towards the rad.thus you don`t remove the timing cover and easy to replace,once you remove the serpintine belt then the pulley on the pump then there are about 6 bolts that you remove to change the pump.if its the (dohc)motor i strongly suggest you have a shop do the job as its not an easy job to do and if you don`t get the timing belts timed exactly you will be sending the heads to the machine shop to repair.

Oct 31, 2011 | 2001 Pontiac Grand Am SE

1 Answer

I have a minkk kota riptide salt water bow mount trolling motor. The motor functioned properly last time out. This time the motor failed to come on. one of the batteries was found to be bad and...


Many times on the battery lead, actually the part that tightens to the battery, has a circuit breaker. You will notice a small reset button on each positive lead....of course there are two for a 24v system. Reset each one!

Jan 12, 2011 | Minn Kota Riptide St Saltwater 80 Bow...

1 Answer

The dial on the intermatic water heater timer is not rotating on it's own and is easy to turn in either direction-without pulling it out and setting the time. The unit is only 1 year old..Can I replace the...


You can replace clock motor on many Intermatic timers:
Snap mechanism loose using metal spring top inside box.
Tip mechanism out and get clock motor number off motor.
Google search specific clock motor number.

Aplus sells many clock motor:
http://www.aplussupply.com/intermatic/timermotors.htm
Electric supply online sells clock motors
http://www.electricsupplyonline.com/prod/intermatic-motors.php

Grainger carries inexpensive clock motors for T101, T103, T104 timers.
http://www.grainger.com/Grainger/timer-accessories/timers/electrical/ecatalog/N-8hi
T101 and T103 use 125v motor
http://www.grainger.com/Grainger/INTERMATIC-Time-Clock-Motor-1PNK1?Pid=search
T104 uses 240v motor
http://www.grainger.com/Grainger/INTERMATIC-Time-Clock-Motor-1PNK2?Pid=search

Dec 01, 2010 | Intermatic & Indoor/Outdoor Rain Tight...

1 Answer

MINN KOTA MAXXUM TROLLING MOTOR WON'T WORK PROPERLY


I'm having the same problem - does the motor have brushes and could this be the problem? mjj2103

Jun 27, 2010 | Minn Kota Maxxum 70 Freshwater Bow Mount...

1 Answer

Ac/heater blower motor issues


Replace the motor and resistor at the same time. A motor that has too much resistance will blow the resistor out every time. Been there done that. I've sold a lot of resistors and they had no warranty unless you replaced the motor too.

Jul 09, 2009 | 2001 Isuzu Rodeo

2 Answers

Dryer will not turn on (electric) does it need time to heat up?


most of the time if you try to start it and it don't come on and just makes a sound the motor is to weak to kbink it on(bad motor)mike

Nov 29, 2008 | Kenmore 63012 Electric Dryer

1 Answer

Modle 80 washer question?


ck motor wiring connection for burnt or dark connections also possible bad timer ..have known timer to cause motor to run both speeds at same time this causes motor to overheat and shut off

Aug 16, 2008 | Kenmore 22422 Top Load Washer

1 Answer

Noisy motor on Dyson Vacuum Cleaner and how long should a motor last Roy


A motor can last a long time or a short time, there is no way to predict how long one will last. Most times it is dust has gotten into the motor bearings and they get nosiey. Replacing the motor is the only cure.

Apr 24, 2008 | Vacuums

1 Answer

DRYER STOPS


could be thermal overload in motor its a motor protector in the motor when the motor gets hot it cuts power to the motor when motor cools it closes and resets age of drier counts some times you can take drier apart and blow dust out of motor and will fix now if the door is not closing tight vibration can cause door switch to break contact that will do it too most of time motor or relay must be replaced

Oct 27, 2007 | Kenmore 63942 Dryer

Not finding what you are looking for?
Schaerer Siena Espresso Machine Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Schaerer Coffee Makers & Espresso Machines Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Kolbrun...

Level 3 Expert

1205 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Schaerer Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...