Fuji manualxe2 picture does not open

here you go http://www.fujifilm.com/support/digital_cameras/software/ if it worked let me know! thumb me up

Connect your USB cord that came with your camera to your camera and computer, once camera is detected select start > computer>double click on camera removable storage. double click on the picture. I will open in the windows default photo program, once it is open save it to your computer. Hope this helps

Hi there,

If you dont have the CD, you can still download the pictures from your computer. All you have to do is connect it using the usb cable. Right click on your windows START button and choose Explore. It will open a windows explorer containing folders and subfolders. On the left pane, under My Computer or Computer, look for the drive letter associated with your Fuji Camera. Click on it to show the files on the right side. You just have to locate for the folder containing the pictures. Then once found, select them then right click, choose copy then go to your computer's local drive, right click and choose Paste. That's it.

If you need further assistance, please let me know.

Thank you for choosing FixYa!.

hi.
here's the direct link for the S6500fd photoshop plugin download from adobe. photoshop should open raw after you've installed this:

http://download.adobe.com/pub/adobe/photoshop/cameraraw/mac/3.x/DNG_Camera_Raw_3_7.dmg

Here's  the adobe downloads centre link in case you need to check up on everything & the installation instructions.

http://www.adobe.com/support/downloads/thankyou.jsp?


Good luck!
Cheers Andy.

if you have the negative, you can ask to make another disk. try to open the disk in another computer. ask the place that made the disk if they have the information on their computer.

As you have probably noticed it is not possible to load a picture to the camera by just opening up the camera in MyComputer and dragging the files (FUJI - why?).

Connect the camera to the PC and switch it on.

Open FinePixViewer as soon as you click on one of the photos, on the right hand panel, the Image Utilization tab expands to "Save image to the camera (PTP)". Click on this to send the selected images to the camera. 

One word of caution the camera only seems to be able to display the photos it took. Downloading a JPG from the web resulted in my camera locking up with READ ERROR. No help in the manual but I was able to recover by using FinePixViewer to delete the offending JPG from the camera.
In fact I backed up and deleted all the stored photos to my PC. I then deleted the new one and reloaded them back to the camera. Once again thank you FUJI (but I must add a fantastic little camera).

Good luck.

WCS.Tony

the only way to prevent it is buy a XD card

Fuji Finepix S7000 Zoom Memory Cards (xD-Picture Card - M Type) & Accessories The following memory cards are compatible with your Fuji Finepix S7000 Zoom. Every memory card we offer is manufactured to the highest standard and carries a 2 year minimum warranty. Your Fuji Finepix S7000 Zoom accepts xD-Picture Card - M Type cards. The largest xD-Picture Card - M Type card you can use in your Fuji Finepix S7000 Zoom is 2048MB
View all Fuji Digital Cameras

This is a common problem with this camera and it needs to be sent back to Fuji for repair.I've been through it three times and then they replaced the A350 with an A400 and now I'm having the same problems with the A400.
They want to swap it with a E500.
Both of these replacements are less of a camera then the A350.
If they won't repair it under warranty I suggest you stay away from Fuji cameras in the future,I know I will never buy one again

Simply wear and tear.- dirt ingression- damage from a knock- nothing you can do about unless you are a watchmaker. A repair will be as costly as simply replacing it Check out Fuji support though to be sure.

If the picture taken from digicam are ok when viewed from a computer, the lcd viewer has a loose connection or defective already, if you can open your unit, try to disconnect and reconnect the lcd flexwire inside.