Question about Computers & Internet
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Flashing the bios is the best idea to start with. This will upgrade to the newest bios, which normally adds more features and fixes some bugs.
There is a small chance that this motherboard just doesn't support overclocking, but the majority of them do.
Below is the link to soyo's site and downloads for your model number. There was 4 or 5 bios updates. I would get the newest one.
Hope this helps
Posted on Mar 21, 2008
Bios settings are retained by the Motherboard Battery in the CMOS.
Disconnecting the battery clears CMOS and returns the settings to their
original state. Typically this can be done by simply removing the CMOS
battery and waiting about 15 seconds before reinserting and booting PC.
Nowadays most Motherboard manufacturers supply a jumper to not only
disconnect the battery but also ground the CMOS to effectively drain
any residual power.
The instructions for your MB are found below. JP5 is located to the left of the battery and next to the PCI 2 slot on your MB. There is a Manual for your MB on this site and the MB layout can be found at
Follow the steps below to clear the CMOS memory.
1. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. Its white cap can easily identify this jumper.
2. Put the jumper back to 1-2 to allow writing of new data into the CMOS memory.
Posted on Jan 08, 2010
Soyo has left the motherboard business. I find only specifications for AGP 4x port. I expect the board will support 512megs video RAM on an AGP card as AGP memory is a card limit.
See for more detail:
Your major worry is the 3.3v and 1.5 volt support.
Posted on Mar 21, 2010
Testimonial: "Thanks very much. Will give it a go then"
Tips for a great answer:
Feb 11, 2014 | Soyo SY-P4I845PE Lite Motherboard
Apr 05, 2011 | Soyo SY-P4S DRAGON Ultra Motherboard
Oct 25, 2010 | Soyo SY-7VBA133 Motherboard
Sep 27, 2010 | Soyo SY-7IWM/L (SY-7IWM/LV1.0) Motherboard
Sep 22, 2010 | Soyo KT600 Dragon Plus Motherboard
Mar 21, 2010 | Soyo SY-P4VGM Motherboard
Feb 17, 2010 | Soyo SY-K7VME Motherboard
Mar 21, 2008 | Soyo SY-7VBA133U Motherboard
38 people viewed this question
Usually answered in minutes!