Question about LeapFrog My Pal Violet

1 Answer

Violet won't stop barking

As soon as powered on it starts barking and keeps doing that until turned off. You can select a feature from the paws which will interrupt the barking but once that's over, it goes back to barking again.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Our violet was doing the same thing, as though the on/off paw was pressing all the time. I have just replaced the batteries, and it seems to have fixed it. In one of the manuals I read it says if she is behaving erratically, then replace the batteries, and that the included batteries are for display only. We only had her a month!

Posted on Jan 05, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My nakamichi paws Bluetooth speaker turns on and then turns off . I have charged it with isn male to male cable but still keeps turning off


I have a BT pen that I have to delete from Devices sometimes so that it reconnect.

Check your Devices-Bluetooth, delete and let it pair up again, just like when it was install the first time.

It also may be a power management issue where the computer turns off connections to save power. You can turn that feature off.

See if that works.

Mar 27, 2016 | Audio Players & Recorders

1 Answer

I have an 03 vw beetle diesel turns over strong but won't start. Tried shooting it with ether. Still won't fire. Every thing else working fine please help me to know where to start


bleed any air from the fuel system from the filter to the pump . If you have pipes to the injectors loosen off the pipe nut at each injector and crank until drops of fuel appear at each nut. If there is air in these lines you will not get enough pressure for the injector to work but as soon as you get drops of fuel re-tension the nuts If you have an electric solenoid shut down (stop) make sure there is power at the unit to activate it as it will be in the stop position until it gets power from the ignition circuit.. Do not use ether as this is a good way of blowing the head off the motor or causing serious internal damage.

Jul 17, 2013 | Cars & Trucks

1 Answer

Information won't save to Violet


My experience is that after charging for some tens of minutes it will start. But I seem to be unable to charge the battery enough to have it work for long.

Feb 08, 2013 | LeapFrog My Pal Violet

1 Answer

2003 alero steering won't lock and nothing happens when you turn the key in the ignition


If the security light keeps flashing,you might as well do a reset.
Be sure to turn off all the accesories including the radio before you start the process.
Insert the key to the ignition switch and turn the key to ON position without starting the car.
leave it ON until the flashing light (security) stops.It will take approximately 15 to 20 minutes.
As soon the flashing stop,turn the key to OFF
position and start the cart.
Hope this help.

Jul 23, 2011 | 2003 Oldsmobile Alero

1 Answer

I have a convection bread maker. I made one loaf of bread tonight and i unplugged the machine. 30 minutes later, I tried to make a second loaf ant the menu select wouldn't work but the start and mix in...


Cuisinart has many different bread machine models. Next time you ask a question, please include a model number. Thank you.

Here's my generic best advice for you dear:

Addressing Power-up/Start-up Issues:


1. Unplug the breadmaker.

2. Confirm the power source you're accessing is live using a blender, toaster, etc.

3. Plug the breadmaker in.

4. Confirm the breadmaker is receiving power:


    1. Some models have a built-in off/on toggle power switch. Turn it to the ON position.
    2. Some models confirm power by making and audible tone when plugged in.
    3. Some models have a colored light and/or a lighted display screen that lights up.
    4. Some models require you press and hold the Select button down until the unit powers up.
    5. Some models require you press and hold the Start button down until the unit powers up.
    6. Some models require you select a mode first by pressing the Select button.
    7. Some models require you press and hold the Stop button down until the unit powers up.


Were you able to confirm that your breadmaker is receiving power?


No. Sorry to hear that. Attempt to have the breadmaker serviced by a small appliance repair facility or simply discard it.


Yes, Fantastic! Now reboot the breadmaker's electronics by pressing and holding down the Stop button down until you receive a visible and/or audible confirmation, usually within 1 to 5 seconds. Note: Some models require you press and hold the Start button. Others require you press and hold the Select button.

Often the + and - Timer Delay buttons are pressed by mistake, delaying Start by up to 12 hours. If you suspect the Timer Delay feature has been engaged accidentally, you'll need to reboot the breadmaker's electronics.


All breadmaker use a belt and pulley system. If your breadmaker powers-up but the mixer won't turn when it's supposed to, your belt is probably broken. You'll need to disassemble the breadmaker to visually confirm.

Jun 13, 2011 | Cuisinart Kitchen Appliances - Others

1 Answer

Breadman Pro TR875 is stuck & will not start up to knead the dough. Timer is hi-lighted & shouldn't be. No pushing of any buttons will not clear & start over


Addressing Power-up/Start-up Issues:


  1. Unplug the breadmaker.
  2. Confirm the power source you're drawing from is live using a blender, toaster, etc.
  3. Plug the breadmaker in, unplug it, then plug it in a second time.


    1. Some models have a built-in off/on toggle power switch. Turn it to the ON position.
    2. Some models confirm power by making and audible tone when plugged in.
    3. Some models have a colored light and/or a lighted display screen that lights up.
    4. Some models require you press down on the Stop button until the unit powers up.

E. Some models require you press down on the Start button until the unit powers up.

F. Some models require you press down on the Select button until the unit powers up.

G. Some models require you press the Select button first before pressing the Start button.


In the end, were you able to confirm that your breadmaker is receiving power?


No. Sorry to hear that. Have the breadmaker serviced by a small appliance repair shop or simply discard it.


Yes. Fantastic! Now reboot the breadmaker's electronics by pressing down on the Stop button until you receive a visible and/or audible confirmation, usually within 1 to 5 seconds. Note: Some models require you press down on the Start button instead. And yet a few others require you press down on the Select button instead.

Often the + and - Delay Timer buttons are pressed by mistake, delaying Start by up to 12 hours. If you suspect this handy feature has been engaged accidentally, you'll need to reboot the breadmaker's electronics.


Note: All breadmakers use a belt and pulley system. If your breadmaker powers-up but the mixer won't turn during the kneading cycles, your timing belt is probably broken. You'll need to disassemble the breadmaker to visually confirm. The belt and pulley assemblies are located at the bottom of your breadmaker.


Did this answer help? Hope so. Please rate it as soon as you can. Thank you. r53w6t

Jun 07, 2011 | Breadman TR900S Bread Maker

1 Answer

West Bend Bread Maker model 41056 does not start. When machine is plugged in, LED displays a time but buttons do not work and red light does not go on. (Pan was in machine and anchored.)


Power-Up/Start-Up Issues:


  1. Unplug the breadmaker.
  2. Confirm the power source you're drawing from is live using a blender, toaster, etc.
  3. Plug the breadmaker in, unplug it, then plug it in a second time.


    1. Some models have a built-in off/on toggle power switch. Be sure it's turned on.
    2. Most models confirm power by making an audible beep when plugged in.
    3. Most models have a colored light and/or a lighted display screen that lights up.
    4. Most models require you press down on the Stop button until the unit powers up.

E. Some models require you press down on the Start button until the unit powers up.

F. Some models require you press down on the Select button until the unit powers up.

G. Many models require you select a baking mode by pressing the Select button before the pressing the Start button.


Q: In the end, were you able to confirm your breadmaker is receiving power?


No. Sorry to hear that. Have it serviced by a small appliance repair shop or simply discard it.


Yes. Fantastic! Now reboot the electronics by pressing down on the Stop button for 1 to 5 seconds. Note: A few models require you press down on the Start button instead. And even fewer require you press down on the Select button instead.

Often the + and - Delay Timer buttons are pressed by mistake, delaying Start by up to 12 hours. If you suspect this handy feature has been engaged accidentally, you'll need to reboot the breadmaker's electronics. See reboot directions above.


Note: All breadmakers use a belt and pulley system. If your breadmaker powers-up but the mixer won't turn during the kneading cycles, your timing belt is probably broken. You'll need to disassemble the breadmaker to visually confirm. The belt and pulley assemblies are located at the bottom of your breadmaker.


Did this answer help? Hope so. Please rate it as soon as you can. Thank you. 465ygbea

Jun 07, 2011 | West Bend 41053 Bread & Dough Maker

2 Answers

My fe-280 model has color problems.


Has this camera ever been left in a hot car?

Apr 17, 2010 | Olympus FE-280 Digital Camera

1 Answer

We lost the codes for our Universal Remote Control. The battery compartment has the letters/numbers: RCR450C 3701P


What kind of remote is it? if it is rca you can push the device your going to program it to such as the tv then hold the power button until it stays lit oh, by the way the tv should be on while you do this,now that the power button is lit keep pushing it until the tv turns off as soon as it turns off you push the stop button on the remote like you were going to stop a dvd.Now press power again and your tv should turn on,repeat these steps for all your other devices and your done with no codes,hope you have an rca remote and if you dont maybe they have this no code feature in other brands,good luck

Sep 24, 2008 | Televison & Video

8 Answers

Motorola H700 pairing


It's important to note that the pin has to be entered while the light is still violet. On the phone, begin searching for bluetooth devices. With the boom closed, hold the center button until the light turns violet, then immediately flip the boom open. The phone should immediately find your H700. However, to pair successfully, you must enter the pin (0000) while the light is still violet. If the light goes off, close the boom, enter 0000, and while the phone says processing, hold the center button until the light turns violet and flip the boom open. The light on your H700 will turn blue, then flash rapidly, and your phone should say that it has paired successfully.

Apr 30, 2007 | Motorola Mobility H700 Wireless Headset

Not finding what you are looking for?
LeapFrog My Pal Violet Logo

Related Topics:

338 people viewed this question

Ask a Question

Usually answered in minutes!

Top LeapFrog Toys Experts

thegtw

Level 2 Expert

55 Answers

relojmesa

Level 2 Expert

84 Answers

GI Consulting

Level 2 Expert

108 Answers

Are you a LeapFrog Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...