Question about Standard (CRT) Televisions
I cant figure out my smartlock code its blocking some of the movies
SOURCE: smartlock code
1.Press MENU to show the on-screen menu. 2. Press VOL+ or VOL- to highlight SET. 3. Press CH+ or CH- to highlight PARENTAL CONTROL. 4. Press VOL+ or VOL- to display the SECRET CODE screen. 5. Press VOL+ (on the remote) and the CH+ button on the front of the TV at the same time. 6. Press the Number buttons to enter a four-digit code. The code will appear on the screen as you enter it. The code "0000" is the default of the TV. If you have not set up a code previously,then "0000" is the code.You cannot use "0000" after you set your own code (unless you reset the code to "0000"). 7. Press MENU to save the code.
Posted on Oct 10, 2007
SOURCE: smartlock code
I used the following that I found on a site that compiles v-chip reset solutions:
Philips and Magnavox:
Philips sets use a four digit code to control the v-chip. The override code
for Philip sets is 0711, although it may say "Incorrect code" the first time
to trick you. If "Incorrect code" is displayed, simply enter 0711 again. To
use it hit the MENU key to get to the menus. Go up or down until you reach
AUTOLOCK or SMARTLOCK, depending on the model, and push the "right arrow"
key on the remote. Enter the override code, and enter it a second time if it
says it is incorrect.
Once in the AUTOLOCK or SMARTLOCK menu, go to BLOCK, and push the "right
arrow" key. Go to BLOCKING OPTIONS and press the "right arrow" key. Go to
MASTER DISABLE and press the "right arrow" key so that it says "MASTER
DISABLE ON". The v-chip is now reset.
Posted on Apr 03, 2008
SOURCE: Magnavox TV
If you use an antenna to get your signals...yes. If you have cable or satellite service....NO. None of your TV's have the new ATSC digital receivers, but cable or satellite don't need this.
Posted on Apr 22, 2008
SOURCE: Smartlock on Magnavox TV
Chek in the back of the tv if there is a tiny button, probalbly that you have to use a ball pen to hit it, that says "RESET". press and hold it for 10 seconds an release it.
Posted on Nov 23, 2008
Tips for a great answer:
Oct 12, 2014 | Standard (CRT) Televisions
Jul 10, 2014 | Philips Magnavox 13MT143S 13" TV
Jan 17, 2013 | Philips Magnavox 27MS343S 27" TV
Jun 14, 2012 | Akai Standard (CRT) Televisions
Apr 11, 2011 | Philips Magnavox 20MT133S 20" TV
Dec 04, 2010 | Philips Magnavox 27MS343S 27" TV
Nov 29, 2010 | Philips Magnavox 27MS343S 27" TV
Apr 27, 2009 | Philips Magnavox 27MS343S 27" TV
Apr 26, 2008 | Philips Magnavox 27MS343S 27" TV
Apr 03, 2008 | Standard (CRT) Televisions
82 people viewed this question
Usually answered in minutes!