Question about ViewSonic VX910 19" LCD Monitor

1 Answer

Power light blinking on and off

ViewSonic VX910 monitor appears to have power supply issue. The power light comes on for <1sec, then goes off for about 1 sec, then flashes. This cycle repeats continually. I disconnected the display portion of the monitor and the problem continues. I can not disconnect the video input pcb because the power ON/OFF is routed through the video board. Any way to test the power supply seperately? Any other recommendations? Thanks, Audie

Posted by on

  • Frank Zhang
    Frank Zhang May 11, 2010

    whats the video input pcb and where it is? are you open theLCD cover?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 91 Answers

You will need to replace the below failed caps.
2 - 1000uF @ 10V
3 - 470uF @ 25V
1 - 470uF @ 10V


Posted on May 18, 2009

  • ivanet Apr 27, 2011

    After the replacement was done there was no picture and the green ligth flickers.
    What could be the next step?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I turn on monitor it lights for a few seconds and then goes off...continues to blink on and off never lighting fully. After a while it goes black and will not come on.


Hi,

You can try to replace all of bad capacitor on power inverter board. After all of failure capacitor was replace, try to turn on.

Thanks for visiting FixYa. We answer your question for FREE. Please feel free to click on "YES" button in return. Have a good time...!

Thanks

Jun 28, 2011 | ViewSonic VX910 19" LCD Monitor

1 Answer

I have a ViewSonic VX910 LCD monitor. I turn it on and it comes on for a second then goes black. I did replaced all five capacitors in the power supply board, but it didn't help, still the same problem....


AllI can think of is that a tripler or inverter could be breaking down, causing the unit to go into auto
shutdown mode. Some devise is breaking down, and causing the unit to shut down.
Not an easy problem to troubleshoot unless you've got a schematic and tech skills.
Hope this helps

Mar 26, 2011 | ViewSonic VX910 19" LCD Monitor

1 Answer

I turn it on and it comes on for a second then the goes black


You need to open it up and inspect the capacitors (look for bulging top/seal), burnt inverter transformers, resistors, etc. in the power supply/Inverter board first, post back what you find so we can guide you further. See example of failed Viewsonic monitors: http://s807.photobucket.com/home/budm/allalbums

Mar 16, 2010 | ViewSonic VX910 19" LCD Monitor

1 Answer

ViewSonic VX910 monitor appears to have power supply issue. The power light comes on for less than 1/2 sec, then goes off for about 1 sec, then just flashes green. If you play with the switch and the A/C...


try running the self test on the monitor
Self Test:
turn off the system disconnect the data cable from the tower and connect only the power cable to the monitor and trun on the monitor if you see colour full bars then the monitor is ok then try to go BIOS and see if the monitor is working

Jul 01, 2009 | ViewSonic VX910 19" LCD Monitor

1 Answer

ViewSonic VX910 monitor has a power supply issue.


Your monitor have a bad condensator in the PSU.

The only thing to do is to replace the Power Supply Unit (very expensive, more than a new monitor) or if you have electronic tools, found and replace that condensator.(cheaper way...)

or

Have you connected your monitor with a new power cord ?

Best Regards!

Jun 29, 2009 | ViewSonic VX910 19" LCD Monitor

1 Answer

Viewsonic vx910 19" lcd do not start


Hi...there,
It's seems you've got a busted backlight inverter...

Nov 29, 2008 | ViewSonic VX910 19" LCD Monitor

3 Answers

No power to monitor despite being plugged in


Check your video card. Is your computer booting up?

May 25, 2008 | ViewSonic VX910 19" LCD Monitor

2 Answers

ViewSonic VX910 19" LCD...


I had the same exact problem. I pulled the power supply/inverter board out and found what alot of people have seen. The T1 transformer has blown. Replacement board link here.

Apr 22, 2008 | ViewSonic VX910 19" LCD Monitor

Not finding what you are looking for?
ViewSonic VX910 19" LCD Monitor Logo

Related Topics:

471 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Cindy Wells

Level 3 Expert

5056 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a ViewSonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...