Question about Belkin Computers & Internet
Which option should i be using?
Posted by Anonymous on
Setting Up Belkin Router Is Easy With Right Steps -
How to Install Belkin Router -
Dear Friends Setup Your Belkin Wireless Router With Instant Steps -
1- Connect The Modem With Router (Make Sure Router Is Powered On )
2- Open the Default Gateway with 192.168.2.1 and Configure The Router As You Like .
for more visit
How to Install And Setup Belkin Router Belkin Support
Posted on Jun 01, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
No. Forget the CD and plug a computer directly into the wireless router with a ethernet cable. Open your browser and type 192.168.1.1 When a username/password box pops up type admin for username and password for the password. It should log you into the router. From there you can configure the router to detect and list your devices properly. Normally the router should be working out of the box. If admin/password doesn't work try admin/admin or admin without a password. Anymore questions with this, post here so I can help.
Posted on Jul 19, 2007
I had the same problem. My Belkin N1 Router was constantly dropping the WiFi connection (every few minutes). I tried several solutions I found on different forums:
Change the channel selection from Auto to a specific channel -- I tried all 13 channels, but no improvement.
Update the firmware to the latest (Beta) version -- still no improvement.
Finally I enabled "Protected Mode" and the connection seems fine now. Hope this helps, and good luck!
Posted on Sep 03, 2008
http://www.belkin.com/support/article/?lid=en&pid=F5D7230-4&aid=1564&scid=0reset to factory defaults and reset up your laptop All info at factorywebsite here at this web address.RICHARDM69
Posted on Dec 06, 2008
It will not extend your wireless range. If you connect your spare Belkin F5D7633 to your Belkin F5D8631, one of them would have to be set to "bridge mode" or a pass through modem so that there will be no conflicts as to which modem will receive the ip address from the network. If you set your modem/router to bridge mode, it would disable its wireless function because it will only be a pass-through device.
If you want some tips on how to improve your wireless range, check out this site http://www.microsoft.com/athome/moredone/wirelesstips.mspx. Hope this helps.
Posted on Apr 22, 2009
Are you trying to install the router.
You can do it manually without the CD.
MAke sure that your computer is able to go online through the modem.
If your computer is able to go online through the modem
Then you need to connect the computer to the router ad the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions
Posted on Jan 13, 2010
Tips for a great answer:
Apr 23, 2013 | Belkin Components Belkin F9K1103 N750 DB...
Aug 23, 2012 | Belkin (F6D42304) Wireless Router
Feb 26, 2012 | Belkin Wireless Play Router (F7D4302)
May 20, 2010 | Gateway Belkin 54g Wireless DSL/Cable...
Sep 06, 2008 | Belkin (F5D7230-4) Router (587009)
Feb 24, 2008 | Belkin (F5D7231-4) Wireless Router
Dec 13, 2007 | Belkin (F5D9230-4) Wireless Router...
120 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: