Question about Minolta Office Equipment & Supplies

Open Question

Sagem mf 5461 error imp fan oven - Minolta Office Equipment & Supplies

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
aapman100001
  • 57 Answers

SOURCE: SAGEM MF 5461 HSYNC printer error and Fuser Temp error

SAGEM 5401 / 5461 “PRINTER ERROR FUSER TEMP”
According to SAGEM this fault is caused by an incorrect operation of the fuser unit – the
machine did not heat up in time.
Solution:
Follow the keystrokes set out below, do not worry about what is on the display unless
stated to check. All letters referred to are for the keys on the alpha key pad to the right of
the control panel, under the plastic flap.
For the 5461:
Press down arrow, *, #, ok, 1, ok, stop (red button),
Press down arrow, #, T.
The machine returns to the error code. Switch the machine off for 10 seconds, switch
back on. If successful the machine will warm up and come ready.
Press down arrow, *, #, 0 (ZERO), ok, stop.
For the 5401:
Press down arrow, *, #, ok, 1, ok, stop.
Press down arrow, #, look on the display, press up arrow until “T>>PRINTER” is
displayed. Press ok. The machine returns to the error code. Switch the machine off for 10
seconds, switch it back on. If successful the machine will warm up and come ready.
Press down arrow, *, #, ok, 0 (ZERO), ok, stop.
If this is a recurring problem the firmware on the board may need to be upgraded, or there
is a physical fault with the fuser unit. Low voltage / power surges in the supply power to
the machine may also play a part in the occurrence of the error.
The firmware needs to be version 1.10.
To check the firmware version do the following:
5461:
Press down arrow, *, #, ok, 1, ok, stop.
Press down arrow, *, W
Firmware version is displayed. Press stop to clear screen.
Press down arrow, *, #, ok, 0 (ZERO), ok, stop.
5401:
Press down arrow, *, #, ok, 1, ok, stop
Press *
The trace lists will be printed, firmware version is after PRT, as in example below.
In this example, the printer firmware is: PRT V 1.5
It is older than V 1.10 and the printer firmware need to be upgraded.
The firmware can only be upgraded at Copy Type Electronics or at SAGEM in France.
Therefore the entire machine will have to be returned to us for the upgrade.

Posted on Apr 15, 2009

Ad
  • 1 Answer

SOURCE: Can you tell me what Printer Error Fuser Temp!

printer 3100 mfp
error fuser temp

Posted on Aug 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belling xou69 mf fan working oven not heating up


probably needs a new heating element, easy to install

Feb 05, 2013 | Ovens

1 Answer

I have sagem multifunctional printer model ms 5461. i have lost the drivers for windows xp and i can not find them. Can you help me?


Have you tried the sagem website?
Another option is to use a driver finder program, I know that has a lot of printer drivers.

Jun 04, 2010 | Computers & Internet

1 Answer

Cxclinst.dll


Hi Welcome to FixYa

Here you can download the drivers and softwares:
http://support.sagem-communications.com/site/modele_fax.php?page=produit&numero_type=11&produit=183
You can try reinstalling the software after downloading from here

-------------------------------------------------------------------------
If you are helped with the post please select 'YES'

Jul 16, 2009 | Philips MF-Jet 450 All-In-One InkJet...

3 Answers

SAGEM MF 5461 HSYNC printer error and Fuser Temp error


SAGEM 5401 / 5461 “PRINTER ERROR FUSER TEMP”
According to SAGEM this fault is caused by an incorrect operation of the fuser unit – the
machine did not heat up in time.
Solution:
Follow the keystrokes set out below, do not worry about what is on the display unless
stated to check. All letters referred to are for the keys on the alpha key pad to the right of
the control panel, under the plastic flap.
For the 5461:
Press down arrow, *, #, ok, 1, ok, stop (red button),
Press down arrow, #, T.
The machine returns to the error code. Switch the machine off for 10 seconds, switch
back on. If successful the machine will warm up and come ready.
Press down arrow, *, #, 0 (ZERO), ok, stop.
For the 5401:
Press down arrow, *, #, ok, 1, ok, stop.
Press down arrow, #, look on the display, press up arrow until “T>>PRINTER” is
displayed. Press ok. The machine returns to the error code. Switch the machine off for 10
seconds, switch it back on. If successful the machine will warm up and come ready.
Press down arrow, *, #, ok, 0 (ZERO), ok, stop.
If this is a recurring problem the firmware on the board may need to be upgraded, or there
is a physical fault with the fuser unit. Low voltage / power surges in the supply power to
the machine may also play a part in the occurrence of the error.
The firmware needs to be version 1.10.
To check the firmware version do the following:
5461:
Press down arrow, *, #, ok, 1, ok, stop.
Press down arrow, *, W
Firmware version is displayed. Press stop to clear screen.
Press down arrow, *, #, ok, 0 (ZERO), ok, stop.
5401:
Press down arrow, *, #, ok, 1, ok, stop
Press *
The trace lists will be printed, firmware version is after PRT, as in example below.
In this example, the printer firmware is: PRT V 1.5
It is older than V 1.10 and the printer firmware need to be upgraded.
The firmware can only be upgraded at Copy Type Electronics or at SAGEM in France.
Therefore the entire machine will have to be returned to us for the upgrade.

Feb 24, 2009 | Minolta Office Equipment & Supplies

3 Answers

Drivers


please i need the drivers for my printer MF JET 500 ALL IN ONE INK JET printer

Apr 06, 2008 | Philips MFJET 500 All-In-One InkJet...

1 Answer

Replacing toner on mf-jet 500 philips fax


This link gives you the user manual for mfjet 500 - page 23 for cartridge changing (Sagem have bought fax support from Philips) http://www.sagem.com/support/site/livret/um_mfjet500_uk.pdf When you get a new cartridge there are usually very detailed instructions on the packet too Hope this is what you need, if not then contact Sagem on http://www.sagem.com/support :)

Feb 28, 2007 | Philips MFJET 500 All-In-One InkJet...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...