Question about Wharfedale Televison & Video

Open Question

Wharfedale WH-TV/DVD21NJ factory display on screen and remote doesn't work

The red "FACTORY " message appears about 10 seconds after power on and then no controls work, or remote.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 105 Answers

SOURCE: code for wharfedale dv823b

The codes come from your all-in-one remote control manufacturer. Check the manual or download a code from your remote manufacturer's site.

There may not be a code. Some remotes have a "guess" mode where you simply press "code", point the remote at the device, then scroll up or down using the "channel" button until the unit powers on or off. The remote will memorize the code after you select which device on the remote itself you wish to marry that code to.

Posted on Mar 28, 2008

  • 22 Answers

SOURCE: Wharfedale TV/DVD combo

Contact agent for the unlock code.
Menu and 4 digit code unlocks factory default.
Problem is caused when wrong sequence of keys on remote is pressed, part of parental control.

Posted on May 12, 2008

  • 56 Answers

SOURCE: When the TV is switched a red word ''factory'' appear

replac EEPROM

Posted on Jul 19, 2009

blueextc3221
  • 15935 Answers

SOURCE: Hi, The parental control is on

You cannot unlock the unit without an original remote.


Posted on Nov 08, 2009

  • 1 Answer

SOURCE: hOW DO i CANCELL THE CHILD LOCK ON THE wHARFEDALE

Did you manage to sort this problem out. I ahve the same problem with my Wharfedale WH-TV14J.

Posted on Feb 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chunghop urc10 wharfedale tv wh-tv14j code


Hi, the manual for the remote doesn't show any Wharfedale TVs. If you have the original remote then you could teach the Chunghop.

Manual is available here:

RC Chunghop URC 10 Manual Universal Remote Control from djy

Jul 30, 2016 | Televison & Video

2 Answers

Tv codes from weitz urc22b for wharfedale WH-TV14J


0025 0049 0101 0152
Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name to your device, in the "Search box at the top right of the display window" to see the set-up codes to your device, with different brand remote controls.

Aug 12, 2015 | Televison & Video

1 Answer

On my pt-50lc14 hdtv my screen is stuck on this message, 5v eeprom), 3.3v (gc2), tv-factory mode


Have you tried any of the reset commands?
Try these....please let me know the result:

Method 1
1. Unit power must be ON and unit must be in STOP mode.
2. Press and hold [CH UP] and [CH DOWN] ON THE UNIT for over five seconds. The unit will turn off.
3. Press [DVD POWER] to turn the unit on.

Method 2
1. Press [STOP, TUNE MODE] on the main unit and [>10] on the remote control at the same time for about 3 seconds until the message "Initialized" disappears from the television screen.
2. Turn the unit off and on again.

Method 3
While the unit is off, press and hold [VOLUME +], [OPEN/CLOSE] and [POWER] on the main unit at the same time for more than 5 seconds.

Method 4
While the main unit is on, press [POWER] on the main unit for more than 4 sec. (All the indicators will blink twice when the main unit is reset.)

Another possibility is to unplug the power cord......wait 30 minutes and plug it back in, possibly repeating the steps above. (Method 1 should reset the unit but maybe trying each of them may be necessary until it is reset.

The message appears to be one that displays when the unit is in a setup mode.

Thank you for your reply.

Jan 02, 2014 | Panasonic PT-50LC14 50" Rear Projection...

1 Answer

NO POWER


Need to know how many times the led is blinking.

Try this link for more informationmessage_type_solution.png

Re: tv kdl-55ex620 red light blink 8 times Do a Power Reset. 1. While the TV is off, unplug the power cord of the TV from the electrical outlet. 2. Let the TV remain without power for 60 seconds. 3. Plug the power cord back into the electrical outlet. (If the television is plugged into a power strip or surge protector, remove it from the power strip or surge protector and plug it directly into the wall outlet. If the issue is resolved, the problem is with the power strip or surge protector and not the television.) 4. Turn on the TV. 5. When the TV powers on and a picture is displayed, reset the TV to factory default settings.
  • If the Reset message does not appear and the TV turns off and on, begin again from step 5.
  • If the standby light begins blinking eight times, return to step 1.
6. After the Reset message appears, allow the TV to reset. Do not press any buttons on the remote control or on the TV and do not make any other adjustments for 1 minute. 7. Unplug the power cord from the electrical outlet. 8. Allow the TV to remain without power for 10 seconds. 9. Plug the power cord back into the electrical outlet. 10. Turn on the TV.
  • The initial setup screen displays if the above procedures were performed correctly.
11. Follow the on-screen instructions to complete the initial set up. 12. Perform a system software (firmware) update.

Sep 04, 2012 | Sony KDL55EX620 55 inch BRAVIA 1080p LED...

1 Answer

Cant load channel sound but no picture


First reset it to factory default: While pressing [VOLUME ( - )] button on the TV, press [MENU] button of the remote control 2 seconds, the self check screen will appear, then Unplug Power to reset.
If doesn’t work, update the software, if still not work, let me know.

May 31, 2010 | Panasonic Viera TH-42PX80U Plasma TV

1 Answer

Transonic tv menu displaying factory in RED.No re...


i can use remote controll for 10seconds den FACTORY appears in red on my screen an den remote does not work wat da??

May 21, 2010 | Televison & Video

1 Answer

Power/Standby light blinks green then screen goes blank (off) for


I have a similar problem. Just found out a possible solution yesterday. I am waiting for my lamp but here's what you need to do if you have replaced your lamp. Go into self diagnostics mode: Switch of your TV via remote, you will see red standy by light. Now,on the remote press "Display"=>"Channel 5"=>"Volume Up"=>"Power Button". All these keys need to be pressed within 3 seconds. You will now enter the diagnostics mode. Press "Jump" on remote (bottom right) 3 times and then press "Channel 2" 9 times. The screen will display your current lamp hours used.

In order to reset your tv to factory settings and for the new bulb to work you must reset this timer or else your TV will assume you are still using the old bulb and will automatically kick in "over protection mode". So here's what you do once you do on the lamp hours display screen. Press the "Channel 3" button on the remote 3 times then "Mute" then "Press Enter" to reset the timer to zero. Your TV should now work as normal. And remember, whenever a part is replaced all factory settings must be reset to zero. To do this, follow "Display"=>"Channel 5"=>"Volume Up"=> "Power Up" to enter service mode. Finally, press "Channel 8" and then "Enter" to put the TV back to factory settings.

The above mentioned is usually performed by a service technician and they charge somewhere around $95 diagnostic fee. You just saved this charge. If you see flashing red lights count them when they flash in sequence. This is a code for the techs to tell them what is wrong. These flashing red lights sequentially flash from 0 to 10 times to identify a problem. Usually, when the bbulb goes bad the only thing that might need to be replaced would be a "lamp Driver" aka "Power Block Assembly" $116.25 online from Sony, or the ballast. Sometimes, if you do not have a video a Thermal FUse can go bad which only costs $4.80 for the KDF60-XS955 but the techs will charge you over $300. You can do this yourself if you can get your hands on a service manual.

Hope this info helps.

Good Luck to you all.

Jan 20, 2009 | Sony Grand WEGA KDF-60XS955 60" Rear...

3 Answers

Chuld unlock


to unlock the parental control on a Telefunken TV that has a blue screen and a red padlock on the top left hand side, hold down the display button on the remote for 10 seconds and it works

Sep 02, 2008 | Televison & Video

1 Answer

Wharfedale TV/DVD combo


Contact agent for the unlock code.
Menu and 4 digit code unlocks factory default.
Problem is caused when wrong sequence of keys on remote is pressed, part of parental control.

Oct 15, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Wharfedale Televison & Video Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

661 Answers

Jonathon summesfield

Level 2 Expert

285 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Wharfedale Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...