Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Sounds like a belt is broken or something - Whirlpool Duet GHW9150P Front Load Washer

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 20 Answers

I need more info about the machine. Does it make any noise when the start button is pressed, if you can hear the motor turning then more than likely your belt is either after slipping off the drum or breaking. you should be able to access the belt either by the back of the macine or the top to see if the belt is broke or just after slipping. Another problem it could be is that the capacitor in your machine could have blown. To test this you press start, open the door of the machine, spin the drum by hand and close the door before the drum comes to a stop, if the drum continues to rotate after you close the door then you know it is the capacitor that is blown, this needs to be replaced either by an electrician or a specialist as it is possibe to connect the capacitor wrong and the result would be the capacitor exploding damaging your hand. Always plug out the machine before opening the top or back of the machine.

Posted on Jan 03, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The resistance belt on the nordictrack cx990 is too hard, is it broken


if your belt has broken you would have no resistance at all.sounds like the belt could be frayed and is caught up somewhere or something else came loose. the rear cover needs to be removed to see what is wrong.

Aug 29, 2014 | Exercise & Fitness

1 Answer

Drer heats but drum does not turn


Hi, it sounds like the drive belt is sliping,broken or something connect with the drive is sliping or broken. If you can see the motor and belts turn it on and the fault should reveal itself
Good luck

Aug 04, 2014 | Kenmore Dryers

1 Answer

Oil filter came off will that cause the motor to sound like something broken in it ?


yes. if you ran the car without a oil filter it was being run without lubrication. this subjects the crank and cams and pistons to incredible friction and heat. also, newer cars can have hydraulic valve lifters and timing belt tensioners. no oil means no oil pressure. no oil pressure means that those lifters aren't lifting and the tensioner is slack. you may have broken anything from a lifter to a piston rod or damaged the piston itself.

Mar 31, 2014 | 2004 Kia Sedona

1 Answer

Dryer wont spin


It sounds like your dryer drum drive belt may have broken. Top replace the belt follow the instructions below.
PLease go HERE for a video instructional of thewhole job.

Jan 27, 2012 | GE Dryers

1 Answer

Belt problem - when we began to vacum, we heard a sound, the rollers stopped moving


Sounds like your belt may have broken, or you have something jammed in there preventing the brush roller to spin. But most likely you're problem is a broken belt which is a simple fix that takes no time to fix

Aug 25, 2009 | Vacuums

1 Answer

Dryer appears broken, heard LOUD sound from other room (broken belt?)


gjtgjtgjtgjytgfjytjytgjtgyjtgujytgujttjtytgjtjytgjtgjtyjtgjytjytjgjykykuiykyyuuxuxxudkdssyzxhclds dskhsdlhkshkchdsflfhlhsdlo

Apr 14, 2008 | Kenmore Elite HE4 Electric Dryer

5 Answers

Whirlpool Ultimate Care HD Plus Model #LSR8233EQ0 won't agitate or spin


It sounds like the coupling between the motor and gearbox has worn out. It should cost around $15 plus shipping and handling.

Aug 04, 2007 | Whirlpool Ultimate Care II LSQ9564J Top...

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...