- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
For example to set wedesday 1:10 am you would: a: press and hold the time/code button for 2 sec. You will hear announcement "to set code ...... to set time press memo (2-way) button b: release the time/code button c: press the 2-way/m button once. You will hear voice prompt set day and time, sunday d: press the << button or the >> button until you hear wed. e: press the time code button once to enter the current day and xx hour is announced f: press the << button or >> button to get to 1. g: press the time code button once and 1 will be announced and you will hear xx min. announced h: press the << button or >> button once for each minute as it will gradually increases or decreases to reach 10. i: press the time code button and 10 will be announced followed by pm j: press << button or >> button to change am k: press the time code button once and it should announce the current day and time. good luck
Press and hold the "clock" button. You will hear a beep and the display will begin flashing a number which represents the day of the week. 1=sun, 2=mon, and so on. Press the left and right arrow buttons to scroll through. After choosing the day, press the "clock" button again to set the hour. It will start with 12 am and go through 11pm. Press "clock" again after setting the hour to set the minute.You will be able to scroll through 0-59 to choose the minute. When finished, press the "clock" button again to exit the time setting feature.
I have model no. 1188 bellsouth digital answering machine. If you have to leave a message, the message I recorded is no longer there, there is a generic message saying please record your message. How do I go back and record my voice with my message. I cannot find my original manual.
Hi Diana - To record your outgoing message, hold down your ogm button ( outgoing message) for two seconds and it will ask you to record a message. To play back your message, just push the same button and it will play your message. If you don't like it just do it again. If this solves your problem PLEASE rate this as fixed. If you need more help just add a comment and I'll be happy to assist you further. Thanks and have a good day.
The bellsouth model 2006c has been discontinued and you can no longer order a manual for it. But there is hope! If you call 214-758-2500 press 3 and the enter the model number you will be given a list of options to choose from to help you with your problems. DO NOT SELECT THE OPTION TO ODRER A MANUAL! The service will tell you that the machine as been discontinued and then hang up and you will have to call back and start all over again. I hope this was some help for you.