Question about Maytag Refrigerators

Open Question

Maytag msd2456ge How to reset water filter light

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: how to reset a maytag plus fridge

I have a Maytag Plus Refrigerator and the way to rest the water filter light is to simultaneosly hold down the "Light" and "Lock" pads until the "Change Filter" light blinks (approximately 3 seconds). This will reset the Change filter light for 12 months or for the number of gallon threshold for your filter.

Posted on Dec 15, 2008

  • 2 Answers

SOURCE: Water Filter Indicator Light on Maytag side by side

Hold light and lock until change filter light blinks

Posted on Feb 11, 2009

toolkits
  • 1099 Answers

SOURCE: Please tell me how to

Hello,

The filter status display will help you know when to change your
water filter. When the display reads 10%, order a new filter. It is
recommended that you replace the filter when the display reads 10% OR when water flow to your water dispenser or ice maker decreases.

The filter should be replaced at least every 6 months depending on your water quality and usage.

Step 2
Press the eject button to release the filter from the base grille.

Step 3
Pull the filter straight out.

Step 4

Turn the cap counterclockwise to remove it from the filter. IMPORTANT: Do not discard the cap. It is part of your refrigerator. Keep the cap to use with the replacement filter.

Step 5
Align the ridge on the cap with the arrow on the new filter and
turn the cap until it snaps into place.

Step 6
Remove the protective covers from the O-rings. Be sure the O-rings are still in place after the covers are removed.

Step 7
Push the filter into the base grille. The eject button will pop back out when the filter is fully engaged.

Step 8
Flush the water system. Use a sturdy cup or glass. Depress and hold the
water dispenser lever for 5 seconds, then release it for 5 seconds. Repeat this process until water begins to flow. Once water begins to flow, continue depressing and releasing the dispenser lever. Hold down for 5 seconds and then release for 5 seconds. Do this on/off process for about 2 minutes. This will flush air from the filter and water dispensing system.


Take care......

Posted on Aug 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Filter light will not turn off


Resetting your Refrigerator filter indicator light after changing your water filter

Some people are not aware that after you change your refrigerator water filter, there are two more steps that should be taken to complete the water filter change process.

Step 1:
Reset your water filter indicator light - Most new refrigerators come equiped with an indicator light that notifies you when it is time to change your water filter. This light does not automatically reset when you change your water filter. Here is a list of refrigerator manufacturers and how to reset the indicator light.

GE General Electric Refrigerators - Press and Hold the Reset Button for around 8 Seconds.

Step 2:
Flush a couple of gallons of water through your new filter. Since most refrigerator water filters are made of carbon, some carbon residue is present in the first gallon or two of water. This will leave a bitter taste and residue in your water. If you continue to have these problems after flushing a couple of gallons through the filter, it is possible that you have a defective water filter.

Nov 11, 2012 | GE PFSS9PKy Refrirator

2 Answers

How do i reset the waterfilter light


WATER FILTER CHANGE REMINDER

(Select Models)

For some refrigerator models featuring

water filters, the Water Filter Change

Reminder function monitors the life of the

filter and provides a reminder when it is time

for the filter to be changed.

When the system detects either 12 months

of usage, or the filtering of 416 gallons of

water (whichever comes first), the CHANGE

FILTER indicator light will illuminate. This

indicates that the water filter should be

changed and the light reset.

To reset CHANGE FILTER light: Press and

hold the LIGHT and LOCK pads until the

CHANGE FILTER light blinks (approx. 3

seconds). The control is now reset for 12

months or another 416 gallons.

Note: The Water Filter Reminder will

operate if the filter bypass is in place.

If you have other questions please let me know, Thanks Sea Breeze

Jun 10, 2011 | Jenn-Air JCD2389G Side by Side...

2 Answers

Reset water filter light


WATER FILTER CHANGE REMINDER
(Select Models)
For some refrigerator models featuring
water filters, the Water Filter Change
Reminder function monitors the life of the
filter and provides a reminder when it is time
for the filter to be changed.
When the system detects either 12 months
of usage, or the filtering of 416 gallons of
water (whichever comes first), the CHANGE
FILTER
indicator light will illuminate. This
indicates that the water filter should be
changed and the light reset.
To reset CHANGE FILTER light: Press and
hold the LIGHT and LOCK pads until the
CHANGE FILTER light blinks (approx. 3
seconds). The control is now reset for 12
months or another 416 gallons.
Note: The Water Filter Reminder will
operate if the filter bypass is in place. Let me know if you need the complete manual, Thanks, Sea Breeze

Apr 16, 2010 | Maytag MZD2766GES Side by Side...

1 Answer

Reset filter light


WATER FILTER CHANGE REMINDER
(Select Models)
For some refrigerator models featuring
water filters, the Water Filter Change
Reminder function monitors the life of the
filter and provides a reminder when it is time
for the filter to be changed.
When the system detects either 12 months
of usage, or the filtering of 416 gallons of
water (whichever comes first), the CHANGE
FILTER
indicator light will illuminate. This
indicates that the water filter should be
changed and the light reset.
To reset CHANGE FILTER light: Press and
hold the LIGHT and LOCK pads until the
CHANGE FILTER light blinks (approx. 3
seconds). The control is now reset for 12
months or another 416 gallons.
Note: The Water Filter Reminder will
operate if the filter bypass is in place.
If you want complete service manual please let me know, Oh Please rate Me, Thanks, Sea Breeze

Apr 09, 2010 | Jenn-Air JCD2389G Side by Side...

1 Answer

I changed my water filter and now i need to turn out the filter warning light.


WATER FILTER CHANGE REMINDER
(Select Models)
For some refrigerator models featuring
water filters, the Water Filter Change
Reminder function monitors the life of the
filter and provides a reminder when it is time
for the filter to be changed.
When the system detects either 12 months
of usage, or the filtering of 416 gallons of
water (whichever comes first), the CHANGE
FILTER
indicator light will illuminate. This
indicates that the water filter should be
changed and the light reset.
To reset CHANGE FILTER light: Press and
hold the LIGHT and LOCK pads until the
CHANGE FILTER light blinks (approx. 3
seconds). The control is now reset for 12
months or another 416 gallons.
Note: The Water Filter Reminder will
operate if the filter bypass is in place.
Please rate me!
Thanks, Sea Breeze

Mar 22, 2010 | Maytag MZD2766GES Side by Side...

1 Answer

Red light stays on after changing the water filter and running about 2 gallons through it


Water Filter Status Indicator
Light (select models)
The Water Filter Status Indicator Light serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition. A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function is reset.
To Reset Indicator:
• Press and hold both the Lock and Water
buttons simultaneously for four seconds. The
green filter status indicator light will flash
three times when the function has
successfully reset.

Nov 27, 2009 | Maytag MZD2665HE Side by Side Refrigerator

1 Answer

Change filter light


Water Filter Status Indicator
Light (select models)
The Water Filter Status Indicator Light serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition. A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function is reset.
To Reset Indicator:
• Press and hold both the Lock and Water
buttons simultaneously for four seconds. The
green filter status indicator light will flash
three times when the function has
successfully reset.
Sea Breeze

Nov 25, 2009 | Maytag MSD2650H Side by Side Refrigerator

1 Answer

Maytag msd2454gr refrigerator how turn filter light off after replacing filter?


For some refrigerator models featuring
water filters, the Water Filter Change
Reminder function monitors the life of the
filter and provides a reminder when it is time
for the filter to be changed.
When the system detects either 12 months
of usage, or the filtering of 416 gallons of
water (whichever comes first), the CHANGE
FILTER
indicator light will illuminate. This
indicates that the water filter should be
changed and the light reset.
To reset CHANGE FILTER light: Press and
hold the LIGHT and LOCK pads until the
CHANGE FILTER light blinks (approx. 3
seconds). The control is now reset for 12
months or another 416 gallons.
Note: The Water Filter Reminder will
operate if the filter bypass is in place.

Nov 23, 2009 | Maytag MSD2454G Side by Side Refrigerator

1 Answer

Changing light after installing new water filter


Water Filter Status Indicator Light
(select models)
The Water Filter Status Indicator Light serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition. A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function is reset.
To Reset Indicator:
• Press and hold both the LOCK and WATER
buttons simultaneously for four seconds. The
green filter status indicator light will flash
three times when the function has
successfully reset.

Aug 12, 2009 | Jenn-Air 21.6 cu. ft. Side-By-Side...

1 Answer

The warning light to reset filter came on. I've


Resetting your Refrigerator filter indicator light after changing your water filter Some people are not aware that after you change your refrigerator water filter, there are two more steps that should be taken to complete the water filter change process.
Step 1:
Reset your water filter indicator light - Most new refrigerators come equiped with an indicator light that notifies you when it is time to change your water filter. This light does not automatically reset when you change your water filter. Here is a list of refrigerator manufacturers and how to reset the indicator light.
Amana Refrigerators - Press and hold the Auto and Dispenser Lock buttons until the water filter status indicator light flashes.
Frigidaire Refrigerators - Press and Hold the Reset Button Until the Indicator Light Flashes.
GE General Electric Refrigerators - Press and Hold the Reset Button for around 8 Seconds.
HotPoint Refrigerators - Press and Hold the Reset Button for around 8 Seconds.
Jenn-Air Refrigerators - Press and Hold The Light and Lock Buttons until the Water Filter light flashes.
Kitchen Aid Refrigerators - Press and Release the Light Button 5 times Quickly.
Maytag Refrigerators - Press and Hold The Light and Lock Buttons until the Water Filter light flashes.
Samsung Refrigerators - Press and Hold the Ice Type and Child Lock Buttons at the same time for 3 seconds.
Whirlpool Refrigerators - Press and Release the Light Button 5 times Quickly.
Step 2:
Flush a couple of gallons of water through your new filter. Since most refrigerator water filters are made of carbon, some carbon residue is present in the first gallon or two of water. This will leave a bitter taste and residue in your water. If you continue to have these problems after flushing a couple of gallons through the filter, it is possible that you have a defective water filter.
Once these two steps are completed, you are all set to enjoy great tasting ice and water through your refrigerator. If you don't see your manufacturer listed or the insructions don't work for your model please post a comment with your make and model number so that we can provide exact instructions for your model.

May 06, 2009 | GE PDS22LBN Bottom Freezer French Door...

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Refrigerators Experts

Bailey's...
Bailey's...

Level 2 Expert

221 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

isaac johny
isaac johny

Level 3 Expert

796 Answers

Are you a Maytag Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...