Question about JVC AV27F476 27" TV

3 Answers

JVC AV2649S Picture Too Large

The picture is too large for the screen size. On a computer monitor there are adjusters to change the picture sizing to fit and center on the physical tube. How do I adjust this TV's picture size? I can't find any adjustments and I can't seem to locate the correct screen in the Setup Menu. Is there a diagnostic menu?


Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 93 Answers
Re: JVC AV2649S Picture Too Large

You can see the diagnostic menu in jvc as you press both at the same the display and the picture mode buttons

Posted on Oct 18, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: JVC AV2649S Picture Too Large

How can I adjust my screen size without an remote from my jvc kart television

Posted on Apr 21, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: JVC AV2649S Picture Too Large

If you're still having trouble with this problem, I realized that you have to press the aspect button at the top of the remote and change the mode to "full".

Posted on Nov 29, 2012

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Picture is to large for 27in

If model indicated here is correct either a problem in the Vertical circuit of the set or an adjustment.

Almost any shop can take the set into the service menu and adjust vertical size a bit to correct if not circuit problem.

Nov 02, 2012 | RCA F27636BC 27" TV

1 Answer

Picture is too large to show on screen

Check its "Pin-cushion" section circuit for the fault. An IC is used there to control the pin cushion distortion. If this IC has got faulty, this type of fault can occur. This is actually a skilled work. If you are not ahndy, seek any technicians' support.

Jun 18, 2012 | Sony KV-36XBR400 36" TV

1 Answer

Picture too large for screen

It appears that on this television you can only adjust the picture size when you are using the twin picture feature. You must adjust the picture size with your other remote control. Since I do not know whether you are connected to a cable box or a satellite tv box or a blu ray player or a DVD player I cannot be very specific. On your other remote control you should had an hd zoom button, aspect, format, ratio, #, or etc. Those buttons change the picture size. The other factor determining picture size is the resolution the equipment connected to your tv is set to. This tv supports 1080i but you should also try setting the connected equipment to 720p or 480p or 480i. Also the connected equipment may be connected to your tv in two places so make sure you are on the correct selection using the tv video button on the Sony remote.

May 06, 2010 | Sony FD Trinitron WEGA KV-36HS500 36" TV

1 Answer

Jvc 57 inch tv. kid did something to change picture size. now too large and bottom is cut off. aspect button on remote when pressed shows a red circle with a line through it.


what was pressed on the remote is "Zoom" button, that's why the picture size is large.

So try to identify the Zoom button on your remote by pressing every button on your remote in order to get the zoom button function.

I hope you understand my message.

Good luck.

Apr 13, 2010 | JVC AV-28-BD-5-Bl 28" TV

1 Answer

Operating Manual for aToshiba CT-9371 remote or TV #CX2769J

press menu or red button ( NOT STANDBY ) find pic format( aspect ) and change screen size to match tv

Nov 07, 2009 | Toshiba Standard (CRT) Televisions

1 Answer

We have a large screen TV and it displays a solid

your closed caption system is turned onn to its TEXT FUNCTION use your remote to find the CC or closed caption option and turn it off and the block will go away . good luck

Oct 26, 2009 | JVC Standard (CRT) Televisions

1 Answer

Picture is too large for the screen, it seem like we have a 32 in picture on a 28in screen

This might be because the decoder you are using isn't set properly, set it on its MENU to 14.2 Screen, that should sort it out , good luck , the Yeti

May 20, 2009 | Standard (CRT) Televisions

1 Answer

Picture too big for screen

you need to go into the picture menu, and play around with the screen size options.

Jul 12, 2008 | Standard (CRT) Televisions

1 Answer

Picture is too big for screen. What do i do?

You may be able to adjust the picture width and height if there are controls. Look at the back of the set for holes labeled V.Size and or H.Size, these are the Horizontal and Vertical size controls. You'll need a small screwdriver (3/16) to insert into the control and adjust.
If there are no controls then it may need to be serviced as there are capacitors that have failed which are causing the picture to change size.

Mar 11, 2008 | Apex Digital AT2402 24" TV

Not finding what you are looking for?
JVC AV27F476 27" TV Logo

2,086 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66352 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a JVC Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides