Question about Intermec Office Equipment & Supplies
SAP Program will not print error orange light .
There are a few things to figure out here from a SAP basis administrator perspective these steps are common. Also I am just trying to help and with SAP there could be multiple solutions. Good luck.
Check SAP MarketPlace for SAP note: 1557674
Here are the steps taken from the SAP Community Network which might help. I would suggest reading the entire link as its informative. http://scn.sap.com/thread/1975158
to create an output device, choose Output Devices on the Devices/Server Tab
click on Display now you will be in Spool Administration window
click on Change button then Create tab will be appear, now you have to put the following information.
put the Output Device name with shortname
Device Type: SAPWIN
Device class: Standards printer
you can put Model/Location/Message as per concern.
Under Access Method
Access Method: G
Host Printer: __default
for more information about
(1) Choose "S: Print Using SAP Protocol" if a print server with SAPlpd or SAPsprint is used to print barcodes.
(2) Choose "F: Printing on Frontend Computer" if SAPlpd and SAP GUI are used together to print barcodes, SAP GUI sends print job to SAPlpd, SAPlpd is started automatically and forwards the print data stream to the Windows print manager.
(3) Choose "G: Frontend Printing with Control Tech", only SAP GUI is involved in printing barcodes, SAPlpd is not used.
Here are the Intermec drivers:
Understanding the LED Indicators
Green (blinking) Auto-Sensing mode
Green (blinking) Downloading font, form, or graphic
Green (solid) Dump mode
Green (solid) Ready mode
Green (solid) Print mode
Orange (solid) Boot mode
Red (blinking) Media jam, overheated print head or stepper
Red (blinking) Downloading firmware
Red (solid) Error mode
Posted on Dec 30, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
here is the specific intermec syntax (stx(esc)E1(can)(data)(cr)(data)(cr)(etb)(etx)PRINT
You have to send this sequence with no spaces (use hex equivalent or control c etc)
You can call intermec product support or call Scan Source tech support and they will hep you
Best of Luck
Posted on Jan 04, 2009
your com setting must be 9600baud 7 data bits even parity
you may need to drop back to win 98
here is the syntax you need to send to the printer STX ESC E5 CAN DATA CR DATA CR ETB ETX PRINT
Posted on Jan 04, 2009
Tips for a great answer:
Mar 02, 2011 | Intermec EasyCoder PC4 Label Printer
Jan 17, 2011 | Intermec EasyCoder PX6i Thermal Label...
Dec 28, 2010 | Intermec Cable (USB Adapter) for Keyboard...
Apr 05, 2010 | HP LaserJet 1300 Printer
Oct 26, 2009 | Intermec EasyCoder® PX4i Label Printer
Dec 10, 2008 | Intermec Office Equipment & Supplies
Oct 29, 2008 | Intermec EasyCoder 3400 Thermal Label...
Aug 07, 2008 | Intermec EasyCoder 3400 Thermal Label...
May 01, 2008 | Intermec EasyCoder PC4 Label Printer
355 people viewed this question
Usually answered in minutes!