Servicetool v1074 - Canon Pixma Mp250 Printer

TRY GOOGLE .

IF your talking about the canon printer then:
http://canondriver.id/canon-mp250-service-tool-v1074-free-download.html

ServiceTool V1050

Check this link please
ServiceTool V1074

Try here:
http://www.ziddu.com/download/12968501/ServiceTool_V1074.rar.html

http://stepblogger.com/tutorial/error-code-list-for-canon-pixma-mp287-all-in-one-printer/

I have best solution for reset error 5b00 Canon MX366 about waste ink absorber full :
1. Fisrt step : entering service mode, using this method (dont use other method!) press & hold "stop" button and than press "power" button, release "stop" button and still hold "power" button and than press "stop" button about 5 times ( 1, 2, 3 , 4, 5) and release "power" & "Stop" button.
2. Printer will be entering to Service Mode with indicators " Printer LCD to become full drak and CPU detecting new hardware (dont do anything).
3. Download Servicetool V 1074 for Canon IP2770, download and entering to this Sofware.
4. prepare paper on the printer and Clik "MAIN" on the Menu Servicetool V1074, if success canon MX366 printing "D=000.0
5. turn off Canon MX366 and remove power cord, wait about 60 second, reinsert power cord and turn on your printer,....... o la la la your printer was normal,..... ( ngono ae kok mumet)
6. if you have any qustion, send your email to : [email protected], thanks God bless U

I have the same problem with the black ink cartridge... What should i do?

How to Reset printer canon ip2770 (E 5B00) IP2770 Resetter v1074 I have tried. IP2770 Resetter was sent by our friends in Jambi, and hopefully this iP2770 Resetter runs perfectly. Resetter is free passwords ... and FREE
How to Reset Canon IP2770 Error 5B00
Download Canon iP2770 Restter v1074 free pass Here
(Do not forget to turn off the download manager, for a successful download)
Go to the iP2770 Service Mode:
1. The printer is turned off and plugged the power cord.
2. Press Resume button 2 seconds
then press the POWER button until the green light on (when pressing the POWER button, Resume button ... jgn released first)
3. Then release the RESUME button, but do not release the POWER button.
4. While the POWER button is still depressed, press the Resume button 5 times. Led will light turns green orange with the last glow orange. (Do not be mistaken 4x because the printer will die completely, but it is temporary too) Then ...
5. Release both buttons simultaneously.
6. Led will blink briefly and then will glow GREEN.
V1074 iP2770 Resetter Then run it:
1. Prepare 2 blank paper in the printer
2. In the menu "Clear Ink Counter" click "Play" and "Platen"
3. Click Test Print ... Done ...
(In some experiments sometimes "platen" unable / err message appears, but no problem, still can work well)
Hopefully Successfully

it's normal.. dont worry..
You need reset yor ink tank..
follow this step to reset yor absober ink full....

firstly you need to download ip service tool
servicetool 1> Click here to download
servicetool 2> Click here to download

After download finish
1> turn off printer power switch
2> press and hold on/off button
3> turn on power switch
you will see your printer led bilnking
4> release printer on/off button
5> on printer again until led stable not blinking and you can start use ip service tool

Hope this can hope
:)