Question about Ricoh Aficio AP3800C Laser Printer

2 Answers

Error Message sc376



I own a Ricoh Aficio AP3800 C. It recently started giving me an error message sc376.


Is there any way I can fix this myself? If so, how?


Do you provide repair services? If so, how much and do you serve the Philadelphia area.


Please contact me at 215-290-2196 or e-mail me at


Thanks so much for your prompt response.





Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 62 Answers
Re: Error Message sc376

I am pretty sure Sc376 is your Magenta not Cyan. try replacing your magenta developer unit and your magenta drum unit. If you buy them from a dealer you will have to buy all the colors not just magenta. Try Ebay first and search for supplies for your model.

Posted on Nov 16, 2007

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers
Re: Error Message sc376

Call 215 364 3774 or go to

Posted on Nov 01, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Ricoh Aficio 2232C Error Message SC393-02

I had the same problem after transit of copier. Try removing the yellow developer unit and give it a good shake. You may need to do it with the other units too.

Apr 16, 2013 | Ricoh Aficio 2232C Color Copier

1 Answer

Am having ricoh 1013 photocopier, and its giving an error message that "functional error,switch off mainpower and on"!

Low fusing temperature. Either the thermistor is bad or power supply board (unlikely). Service code can only be reset in service mode by a technician after problem is fixed

Mar 24, 2009 | Ricoh Aficio 1013F Copier

1 Answer

Error code sc 172 on ricoh aficio 2103

Hello sir; This error code is indicate video process error, may be can be reset, the procedure as follow;
press "clear mode", "107", then press and hold down "clear/stop" key for about 3 sec., until SP menu display, touch "copier sp" on screen, enter 581002 then press 1, then turn power off and back on. see what's happen. good luck !

Feb 23, 2009 | Ricoh Aficio 2022 All-In-One Laser Printer

1 Answer

Error message sc 172 on ricoh aficio color 2103

You'll need a tech on site for this one, but it may be difficult to source parts if required for this old box. One of the following situations has occured:

• Poor connection of CCD
• Dirty optics
• Defective lamp regulator
• Defective main scanner IPU board
• Defective CCD

Feb 23, 2009 | Ricoh Aficio 2022 All-In-One Laser Printer

1 Answer

Ricoh AP2600 printer gives an error message of SC322

1st Laser synchronization error signal error. The 1st Laser that turns on inside of the printer can't synchronize properly to print out documents which is why this message comes up and nothing is printing. Probably is going to need to be replaced but a qualified service tech is going to need to look at it further.

Feb 10, 2009 | Ricoh Aficio AP2600 Laser Printer

1 Answer

Ricoh 3800c sc285 error message

Most of the time it is the transfer belt. The belt has gotten scratched up with age and the mach has trouble doing the line position adj.

Dec 11, 2008 | Ricoh Aficio 3800CMF Laser Printer

1 Answer

Ricoh AP3800 COLOUR Laser Printer

SC 556 Pressure roller fusing lamp temperature fluctuation
The pressure roller
temperature changes by
±20°C or more in one second.
This occurs three times in one
minute or two consecutive
• Loose connection of
the pressure roller
thermistor 1. Check if the fusing unit is properly set
and connected to the main frame.
• Loose connection 2. Check if the pressure roller thermistor
connector is firmly connected.
between the fusing
unit and main frame

3. Replace the fusing unit.

Nov 17, 2008 | Ricoh Aficio AP3800C Laser Printer

1 Answer

CL7100 error message sc 440-2 Power off and On.

hello, you problem is a color(cmy) pcu motor lock, the motor is damage or exist a mechanical problem whit the pcu's

Nov 14, 2008 | Ricoh Aficio CL7100 Printer

3 Answers

Ricoh aficio 200

Ricoh Aficio 200 copier has stopped copying from side tray. Can you help?

Feb 17, 2008 | Ricoh Aficio 180 Laser Printer

Not finding what you are looking for?
Ricoh Aficio AP3800C Laser Printer Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Printers & Copiers Experts


Level 2 Expert

393 Answers

Bernard D'Souza

Level 2 Expert

161 Answers


Level 2 Expert

179 Answers

Are you a Ricoh Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides