Question about Citizen Skyhawk Eco-Drive JR3000-51F Wrist Watch

1 Answer

Blank displayI have tried to reset this with no success Any ideas will be gratefully welcome

I have tried to reset this wristwatch which was only purchased last Christmas without success , any ideas would be most grateful

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

Have you considered that a dead battery might be the cause of this. They don't last longer than a year. I would not attempt to change the battery on your own if you would miss this watch if you broke it. I change batteries nearly everyday and the digital ones are by far the most difficult. If you did change the battery on your own already the reason it is not working is because you negated to short the battery. Digital watches sometimes need to be shorted after a battery replacement to turn back on take a pair of metal tweezers and put one end on the positive side of the battery. Look for a little hole with a contact on it that's either A/C or reset. Put the other end of the tweezers here. If that doesn't work a tiny spring feel out of the watch is not replaceable and you must therefore replace the watch if that is the case. Hope this helps.

Posted on Jan 01, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

XQG65-908E


Power up the machine and press TEMP, FABRIC SELECT, TEMP, FABRIC SELECT, in that order, within 30 seconds of powering up the machine, this will enter service mode and t01 will display on the control panel...

Hold in the delay button for 3 seconds, this should reset the codes....

If doing the above does not work after 3 attempts, there is a fault in the circuit relating to the fault code,,,(COMPONENT) good luck. the code is a stuck door. Hopefully you didn't try to pry it open.

May 03, 2017 | Watches

1 Answer

Clasp for Tag Heuer aquamarine watch BA0751


Once you have the part number you can search ebay and if lucky you will find the clasp there.

Jan 22, 2013 | Tag Heuer cj1110.ba0576 Wristwatch

1 Answer

Hi, My wife skagen watch crystal was broken when I took it to a battery replacement place. I have search on skagen to purchase only the crystal without having to send the watch to the US. Is there any...


I have had to replace more glasses in this watch than any other brand over the last two years - It is most definitely a design flaw. The truth is though that you will not need a genuine skagen part. Your local watch repair shop will be able to use a standard 1mm thick domed Mineral Glass manufactured by Sternkreuz for example. It should be fitted by a qualified watch repairer, but you should not need to send it to Skagen. Good luck

Sep 20, 2010 | Skagen 358SSSD Wristwatch

1 Answer

I cant get the cover back on


First - you have to align the groove for stem. Second - a lot of pressure. I doubt you can do it without a special case back closing tool. If you are not successful, there is no other way, but to ask for help at your nearest watch repair shop.

Jan 23, 2010 | Timex 27191 Wristwatch

1 Answer

Reset radio control on atomic wristwatch


Try Googling (Silicon Scientific)(model)(manual) without parens.

Jan 11, 2018 | Watches

1 Answer

Maurice lacroix lady's wristwatch, I have replaced the battery but cannot seat the back , is there a procedure to follow?


You are right - there is the procedure to follow. First - you have to align the groove for stem. Second - a lot of pressure. I doubt you can do it without a special case back closing tool. If you are not successful, there is no other way, but to ask for help at your nearest watch repair shop.

Jan 21, 2010 | Maurice Lacroix Watches

1 Answer

I purchased a abacus wrist net on line with msn direct , and my battery isn't charging with my charger.


Your issue may not be that the watch is not recharging, it may just need to be reset. This will work on most, but not all of the abacus watches. You need to press all but the top left button at the same time. Do this 20x if successful, your watch will magically power up. I have this issue from time to time, usually right after a static shock. Hope this helps!

Dec 15, 2009 | Fossil Abacus AU4002 wristwatch

1 Answer

Citizen eco drive watch doesn't work


My Citizen Red Arrow wristwatch which I purchased last Christmas has a blank display and won't reset . Any ideas would be appreciated

Nov 07, 2009 | Citizen Eco-Drive Modern Watch

1 Answer

How to set an old Timex digital watch


You may find a solution here:
http://assets.timex.com/manuals/?timexBrand=core


Rate me, please.

Apr 02, 2009 | Timex 27191 Wristwatch

Not finding what you are looking for?
Citizen Skyhawk Eco-Drive JR3000-51F Wrist Watch Logo

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Citizen Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Jimmy Accardi

Level 2 Expert

101 Answers

Ansel Alberto
Ansel Alberto

Level 2 Expert

248 Answers

Are you a Citizen Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...