Question about Plantronics - Bluetooth Headset Plus Base & Headset

Open Question

How to pair Plantronics CS520XD headset to CS531N Deskphone base

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Peter Denton
  • 16 Answers

SOURCE: plantronics voyager 510 headset

Make sure the headpiece is charged. Turn the headpiece off by pressing the little black button on top of the earpiece and holding for about 5 seconds. Turn the earpiece back on again the same way. You should have a slow flashing blue light on the mic boom. The base station will now try to find the earpiece and within about 20 seconds the red light on the base should be steady and blue light on top should be on.
If this doesn't work you may need to manually pair the earpiece to the base by pressing and holding the Listen Volume Adjust + Button and headset Call Control Button on the earpiece until the light on the mic boom flashes red and blue repeatedly. As above, the base station will now try to find the earpiece and within about 20 seconds the red light on the base should be steady and blue light on top should be on.

Posted on Nov 05, 2008

  • 1 Answer

SOURCE: how do i pair my plantronics explorer 222

i looked up the users manual online

Posted on Mar 23, 2009

vanherringto
  • 1738 Answers

SOURCE: Can one get the plantronics audio 995 USB headset

I believe it should work...

You may want to review this guide for connecting a bluetooth headset to a PS3:
(Click here)
http://boardsus.playstation.com/playstation/board/message?message.uid=26900460

If you found this information helpful, please give me a big thumbs-up when you rate my answer. Thanks!!

Posted on Feb 07, 2010

  • 1 Answer

SOURCE: Trying to pair my HTC EVO to plantronics explorer

Had the same problem and called Plantronics. They reminded me about putting the earpiece in "Discovery Mode" by holding down the button when turning it on until it flashes blue/red. Then have the EVO scan for bluetooth devices. It found mine right away.

Posted on Oct 05, 2010

  • 5 Answers

SOURCE: Plantronics voyager 500a ~ Trying

http://plantronics.custhelp.com/cgi-bin/plantronics.cfg/php/enduser/std_adp.php?p_faqid=8165&p_created=1128461658

Posted on Jan 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't get the blue light to come on top of the base. The red lught keeps flashing and the amber light is lit. Plantronics 500a headset


The Plantronics 500A is the base for the 510S system, the headset may need to be re-paired to the base unit to make sure that it has a strong link or connection. Here are the links below for the pairing instructions, and also the user guide.

http://www.headsetsdirect.com/pdf/Voyager%20510S%20Bluetooth%20Headset%20System%20pairing.pdf

http://www.headsetsdirect.com/pdf/510_print_en.pdf

Good luck from Headsets Direct - 800-914-7996.

Aug 23, 2011 | Plantronics Voyager 500A Deskphone Adapter...

1 Answer

Phone lifter not working. light on top of base not lit up


Try re-pairing the headset to the Plantronics 500A base unit, it sounds like the headset may have lost connection with the base. Here is the link for the pairing instructions:

Plantronics 500A Pairing Instructions


Good luck from Headsets Direct!

Jul 06, 2011 | Plantronics Voyager 500A Deskphone Adapter...

1 Answer

Can sync earpiece to base. Please help.


Here are the pairing instructions for your Plantronics Voyager 500A base:
On the base, press and hold both speak volume fine adjust buttons until the blue talk/on line indicator light and red power indicator light start to flash.
Now put the headset into paring mode that you will be using with the base.
Pairing is complete when the talk/on line indicator on base illuminates solidly.
Here is the link to the 500A user guide:

Plantronics Voyager 510S User's Guide


Good luck from Headsets Direct!

Jun 20, 2011 | Plantronics Voyager 500A Deskphone Adapter...

1 Answer

The red light and blue light in on permanently. The earpiece has been charged all night but when I push the earpiece to sync, the blue light on top of the base doesn't flash therefore no connection. Please...


Unplug the AC power from the Plantronics 500A base, leave it unplugged at least overnight if possible, no lights should be illuminated on the base. Then plug the power back in, charge the headset, and try re-pairing the headset to the Plantronics 500A base unit. Here is the link for the pairing instructions:

Plantronics Voyager 500A User's Guide

Good luck from Headsets Direct!

Apr 02, 2011 | Plantronics Voyager 500A Deskphone Adapter...

1 Answer

Headset not working. red light on base is flashing and yellow light is static; no blue light


It sounds like the headset may have lost connection with the base, try re-pairing the headset to the Plantronics 500A base unit. Here is the link for the pairing instructions:

Plantronics 500A Pairing Instructions

Good luck from Headsets Direct!

Feb 09, 2011 | Plantronics Voyager 500A Deskphone Adapter...

2 Answers

Good afternoon, I´m trying to


Have you tried:

http://plantronics.custhelp.com/cgi-bin/plantronics.cfg/php/enduser/std_adp.php?p_faqid=8165&p_created=1128461658
I was searching for this today and happened to find the above on the plantronics website. It definitely frustrated me till I found out about how to put the base in pairing mode.

Jan 03, 2011 | Plantronics Voyager 500A Deskphone Adapter...

1 Answer

I've plugged everything in, no signal on headset...what could be the problem?


Make sure that the Plantronics Voyager 510S / 500A headset is powered on (remember that it has an individual power button on the actual headset), and that it is paired up to the 500A base unit. Below is a link for the user guide.

Plantronics Voyager 510S/500A User's Guide

Good luck from Headsets Direct!

Oct 27, 2010 | Plantronics Voyager 500A Deskphone Adapter...

1 Answer

We are experiencing a lot of static from the headsets - when the phone is muted the other people on a conference call won't hear the static, but once the mute is off then the static is back. There are at...


Try re-pairing the headset to the Plantronics 500A base unit to make sure that it has a good connection. And of course you also need to be within the 30ft range of the 500A base, and you can typically only use around 6-7 of those units together in the same area. Here is the link for the pairing instructions:

Plantronics Voyager 510S Pairing Instructions

Good luck from Headsets Direct!

Sep 22, 2010 | Plantronics Voyager 500A Deskphone Adapter...

1 Answer

How do i sync the bluetooth to the base


http://plantronics.custhelp.com/cgi-bin/plantronics.cfg/php/enduser/std_adp.php?p_faqid=8165&p_created=1128461658

I was searching for this today and happened to find the above on the plantronics website. It definitely frustrated me till I found out about how to put the base in pairing mode.

Sep 16, 2010 | Plantronics Voyager 500A Deskphone Adapter...

Not finding what you are looking for?
Plantronics - Bluetooth Headset Plus Base & Headset Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plantronics Radio Communications Experts

LeAnna Mathews
LeAnna Mathews

Level 1 Expert

3 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you a Plantronics Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...