Question about Canon DR 5080C Path-Through Scanner

1 Answer

E2O What is meaning about "E20" at the first turn on the Canon DR5080C? Thank's for your kind attention. Best regard's Erik

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 490 Answers

Any error starting with 'E' requires Engineer/Engineering support. E20 means problem with you main motor, may be the cable is loose or fault in the main motor.
S. Mohan, Chennai

Posted on May 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pleas tell how use diver for d430 sim card


Hi,
Do you mean "driver"? And if so: have you checked Dell's website?
Product Support Dell US


Kind regards,
Jon Erik

Sep 06, 2014 | Dell Latitude D430 Notebook

1 Answer

I have a canon mx700 and receiving error code 6A80 and don't know what this means and how ot fix it Thank You, Annette


Hello Annette

Have a look at the link below, i think you will probably get a solution there.

Click HERE.

Please do not hesitate to let me k now if you need any further assistance.

Kind regards
Andrea

Sep 08, 2010 | Canon MX700 Office All-In-One InkJet...

1 Answer

Error code E20


Hello there
the Dreaded E20 fault is a drain problem
washer will show the E20 code and may not spin.
So i would first look for a clog in the hose right before the water pump there is a little cup in the black hose that could be full of suff if so empty the cup and it should work good after this
hope this will help you out
Best regards Michael

Dec 26, 2009 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

AEG Lavamat Turbo 12830 - error code E20


Hi

E20 means there is a bolckage in there
remove filter and clear any debris in there and check impeller is turning ok.

regards

Mar 21, 2009 | AEG Lavamat 16810 Front Load Washer/Dryer

1 Answer

INSTALATION FOR WINDOWS VISTA NOT AVAILABLE


CLICK HERE

However the canon site is having problems.
Check back periodically to check on your scanner software.


Thanks for using FixYa - a FixYa rating is appreciated!!

Jan 31, 2009 | Canon CanoScan D646U Flatbed Scanner

1 Answer

RIM BlackBerry 7250 PROBLEM


no that means the device is nuked probably has water damage or something device error from being dropped i handled 100's of bb's a week i come accross this all the time i use it for parts

thanks

erik

Jun 03, 2008 | RIM BlackBerry 7250

2 Answers

Zanussi


E20 = Problems with water drain in wash phase ALARM CODES E20 Is the drain filter clean; Problems during draining phase (Machine tries to drain for 10 min without emptying the tub) Checks to do: E20 Is the drain pump working? Is the value of the pump about 200Ω? (Measure directly the connector by the board, between J2-2 and J2-7) ; If No Change the pump and run again Clean the filter; Is the draining system OK (drain hose and plumbing where machine is connected) Free and check the draining system; Is the pump blocked? Is there any burn mark on the control board; if yes Change the board E90 = Communication error between user interface and main board. Verify the connector between the main board and user interface board by plugging and unplugging the connector few times on both sides, OR replace the blue ribbon cable. The fault could have been caused by oxidized contacts in user interface plugged in the main board. Kind Regards David Marsh

Jun 19, 2007 | Zanussi FJS1225W Front Load Washer

Not finding what you are looking for?
Canon DR 5080C Path-Through Scanner Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1992 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...