Question about Televison & Video

Open Question

Where is the audio jack on my soniq TV model E32Z10B I need to connect to my laotop?

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
gopakumarg43
  • 75417 Answers

SOURCE: i need code to my universal remote for a soniq tv please

0014

Posted on Oct 10, 2012

Ad
gopakumarg43
  • 75417 Answers

SOURCE: code for soniq smart tv for remote control

038,029,036,022,055. Check these codes. If you wish to get more setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts there. Setup code list and setup instructions to some popular model remote controls are given. Select the 'Timeslide' option from the drop-down list by the 'Sidebar' at the display window. It will make search easy.

Posted on Mar 19, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I connect wireless headphones to a Soniq E42V14A-AU television ?


It would depend upon whether suitable audio outputs are available on you Soniq TV for connection to the wireless headphone inputs.

Oct 30, 2017 | Televison & Video

1 Answer

What can be connected to te audio output jacks on the back of this set?


You didn't include make and model TV; so only generalized answers are possible.

Typical RCA phono jacks like those shown in the blue box of the stereo amplifier below:

25998201-ac5bgneb45fvu53muoueauti-3-0.jpg will accept cables to connect to other audio devices. The audio RCA jacks are color coded RED (right) and WHITE (left) for low level stereo signals. Some have YELLOW jacks for Standard Definition video, ORANGE jacks for AC3 Digital audio and newer amps have HDMI jacks.

Connect the TV's audio OUTPUT jacks and a stereo pair of unused audio INPUT jacks on the amplifier with cables that have ends that match each. Turn on the stereo & TV and select the input on the amplifier that matches the stereo pair of inputs you used to connect to the TV. Adjust the volume to hear the audio over your stereo system's speakers.

Use the HDMI or AC3 sources for superior audio - including 5.1 (or better) Dobly Digital when possible. Otherwise, a standard 2 channel stereo program will be heard.

I hope this helps & good luck!

Dec 08, 2015 | Televison & Video

1 Answer

My soniq tv is stuck on audio how can I turn tv back on ?


Try unplug the set from the wall. wait 30 secs and plug back in and turn on tv. Need model number

Oct 22, 2013 | Televison & Video

1 Answer

Code for UCR-7140 to Soniq TV


0458,0529,0376,0884,0932 are the codes to check with Soniq brand TVs. If you wish to get more codes, check this link.

Feb 09, 2013 | Televison & Video

2 Answers

Key lock on soniq plasma tv witout remote control


Unfortunately the key lock cannot be deactivated without a remote, for it will defeat the purpose of key-locking. You can order a replacement remote, you need to have the exact information of your TV's model/version ( the barcode on the back of the TV starts in REVxxxx).

Sep 28, 2012 | Televison & Video

1 Answer

I have succesfully connected my dynex 32" lcd hdtv 720p 60hz to my rogers digital box and my xbox but i only have room to connect my audio cables for my surround sound speakers to my tv cables there is no...


What cables are you using for the XBOX and the digital box? What surround sound system are you using (what receiver)? Which model of Dynex 32" TV do you have? Looking at the DX-L32-10A, I can connect both devices to the TV and then the audio out to the surround sound system.

If HDMI, then that will carry the audio to the TV and then you would need an audio cable from the audio out on the TV to the surround sound speakers. Similarly, if you use component video and the audio cable combination, there are 2 component video jacks and 3 audio-in jacks on the rear of the TV. Then connect another cable from the audio out of the TV to the surround sound system. (This TV has one audio out and a headphone jack.)

If you previously had the audio going from the Rogers digital box directly to the surround sound system, you need to reroute things unless there are two or more sets of audio in jacks on the surround sound system. Some surround sound system can take several HDMI in cables and then route it to the TV on a HDMI out port.

Without more information, I can't be sure of the best option for your cables.

I hope this gets you started and please provide more information for additional suggestions.

CIndy Wells

Sep 17, 2010 | Dynex 32 in. LCD Flat-Panel HDTV

2 Answers

I HAVE A RCA TELEVISION, MODEL F20632. I CANNOT FIND THE MANUAL TO HELP ME SET UP MY VCR. I HAVE A 4-PLUG VIDEO CABLE (YELLOW, BLACK, GREEN AND RED). CAN YOU TELL ME WHICH CONNECTIONS ON THE TV I NEED TO...


the yellow rca input jack( not the output one ) is for video in (by itself ) and the red and white rca jack inputs are for the right and left audio that is also required when using the yellow video jack
the red and white audio jacks are also required when using the component video inputs ( BLUE , GREEN & RED ) rca jacks
but only one type of connection is required ( yellow video jack , red and white audio jacks ) or ( the blue , green and red component video jacks and the red and white audio jacks )

you will need the yellow video input and the red and white audio inputs

Jan 05, 2009 | RCA F20632SE 20" TV

1 Answer

Receiver to tv hook-up


Is this a Pioneer receiver? They have the prefix of VSX but I can not locate that model on Pioneers website. It could be because it is an older model and no service information is on the website for receivers older than about 5 years old.

To answer your question I need more information. Do you want to connect the video switching of the receiver to the TV or just want the sound of the TV to go to the receiver? I would also need to know what type of video devices you want to connect and what type of inputs and outputs your TV has.

Most TV's have at least a composite video input, that is the most common type. it is a yellow RCA jack on the back of the TV and will be listed as an "input". That is what would be connected to the video output jack (yellow RCA) of the receiver from the TV for video switching. Then you need video sources connected to the video inputs of the receiver to go to the TV. You also need to connect the audio RCA cables from the video devices to the receiver on the proper video inputs that you have connected. Each video input for composite or S-video has audio RCA jacks (red and white) inputs so you can hear the sound of your video device on the receiver.

If you only want to play the sound from your TV on the recevier, you can use the audio output RCA jacks on the TV and connect them to an audio input of the receiver. This is a very simple way of using the receiver for all the different devices connected to the TV without having to connect everything to the receiver and then always having to have the receiver on any time you watch TV. The audio RCA jacks are always the red and white jacks. you just need to make sure you are using the output jacks of the TV and they are connected to an input jack on the receiver. Then you must switch the receiver to what ever input you just connected the TV to, like the "Video 1" or "Video 2" or maybe "Aux" input.

I hope this helps, but you didn't give much information on how you wanted to connect them.

A good rating would be appreciated if you found this free information helpful.

Let me know if you need any more help,

Dave

Jul 06, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75404 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5417 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...