Question about Canon Pixma MX452
1st page prints fine, but the remaining pages print 25% of the size
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If your alarm light is flashing and your printer will not print, press the "copy" button to get the device into the copy mode, once the copy button light is on, press the "Status Monitor" button. The LED panel will then show two lines of words: Line 1 "COPY STATUS" and Line 2 "SELECT JOB TO CANCEL"; then hit the Set button and the screen will show you what print job which has jammed the printer and you then press the - (Minus) button to clear the job. Open and close the front panel and the printer should reset and the warning light go off.
I had trouble locating the problem because my machine tends to stay on the Fax mode and when I pushed the Status Monitor button I would only get information about fax jobs.
Hope you have already figured out the problem. I thought I had better tell someone so I will remember the next time I try to print a job which requires a different size paper than what I have in my printer.
Posted on Jan 12, 2008
On some printers, probably including yours, the black ink will be taken from the reserves in your colour cartridge unless you specifically tell it to do a black and white print on each document, regardless of whether it's printing black exclusively. I wouldn't worry, the black ink in it's own cartridge can also be used for colour photos etc with no detrimental effects.
Posted on Mar 29, 2008
SOURCE: MF8180C Check paper size error
for god's sake don't ring canon customer service as they are useless and just keep directing me to their **** driver which is causing the problem. i could not convince them that my "printer properties" "paper available" was locked on "letter" and won't allow me to change it. even when i go to the "printer preferences" page and set everything to a4 and press "apply" it still is locked on "letter" in the "printer properties" page. Iv'e probably wasted about 20 hours on this and my office has nearly ground to a halt. If i knew it was going to be this much bother i could have just bought another brand printer.
Posted on Jul 06, 2010
Tips for a great answer:
Jul 22, 2010 | Canon imageCLASS MF4150 All-In-One Laser...
Sep 11, 2009 | Microsoft Office Professional 2007 Full...
Sep 02, 2009 | HP Photosmart C4480 All-In-One InkJet...
Jun 21, 2009 | Canon PIXMA iP4200 InkJet Photo Printer
Feb 12, 2009 | Lexmark X2500 All-In-One Printer
Jul 15, 2008 | Computers & Internet
Jan 26, 2008 | HP Officejet Pro L7780 All-In-One InkJet...
Nov 09, 2007 | HP PSC 1510 All-In-One InkJet Printer
Feb 17, 2016 | Canon Pixma MX452
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: