Question about Televison & Video
The TV is about 2 years old. Very seldom used, though the TV is set in a spare room.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi, If all else fails, try do a hard reset. You can verify from your manual, but in some units, this is merely unplugging the unit from mains for a couple of hours. Try again, if it still shows error codes (blinking lights) you probably have to seek the services of a qualified professional. Hope this be of some help/idea. Good luck and kind regards.
Posted on Aug 26, 2007
Unfortunately, this is a failure of the balancer board for the backlight. The unfortunate part is that the balancer is not available by itself anymore, and the whole panel must be replaced, as Sony only has the balancers attached to new panels. You can contact Sony directly to ask for assistance, and it usually helps.
Hope this helps you...
Posted on Jan 05, 2009
There is a power fault with one of the PCB's inside, contact Sony if you are still in warranty, if not contact a Sony service center as it will need an engineer to open it up to repair it.
Posted on Oct 09, 2009
Tips for a great answer:
Nov 18, 2015 | Sony BRAVIA KDL-46W3000 Television
Aug 25, 2007 | Sony BRAVIA KDL-40S2000 40 in. LCD HDTV
Aug 30, 2013 | Televison & Video
Aug 22, 2013 | Sony BRAVIA KDL-40V2500 40 in. LCD HDTV
Feb 03, 2013 | Sony BRAVIA KDL-52W4100 52 in. LCD HDTV
Power off the television. Wait a few minutes, then power it back on. If this does not correct the issue leave the power on, point your remote control towards the Sony television and hold the down arrow button. While holding the down arrow button press the "Power" button. Release the down arrow button and the Sony TV will reset itself to factory settings. Once the television performs a scan on itself your problem should be gone.
Good Luck Ed Pinero
Read more: How to Troubleshoot the Standby Indicator Flashing on a Sony TV ' eHow.com http://www.ehow.com/how_5925008_troubleshoot-indicator-flashing-sony-tv.html#ixzz2KBk1cWbu
Feb 02, 2013 | Sony BRAVIA KDL-40V2500 40 in. LCD HDTV
Oct 17, 2010 | Sony KDL-46XBR4 46 in. LCD Television
Jun 01, 2009 | Sony BRAVIA KDL-40XBR3 40 in. LCD HDTV
Apr 13, 2009 | Sony Televison & Video
27 people viewed this question
Usually answered in minutes!