Question about Polaroid Cameras

Open Question

I just got my iS426 digital camera & was trying to set date & time, pushed wrong button and this came on screen " you now have all set and ready to use." But I don't--- how to I go back and re

Wish there was a complete manual that explained what to do and what all settings on screen mean.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: vivitar 3720 digital camera

,,,push the "square" button in the middle of the direction arrows.

..press the right arrow across untill you come to Date and Time

...press the down arrow to select the "set" and press the square button again

....use the up and down arrows to select the correct date

....use the right arrow button to set the month and day and so on.....

Also, if you don't want the time displayed on the picture, just select "no display".

I hope this helps!

Posted on Feb 08, 2008

  • 172 Answers

SOURCE: Cannot turn date stamp off and date keeps resetting

Try removing battery from camera then wait 10 seconds before installing. This action resets camera.

If no work, locate your camera software version. Procedure should be in manual, else could probably find it in a google search. Then locate latest version with a google search, or panasonic camera website, or call to customer service and ask.

It you do not have latest version, ask customer service how to download it.

Posted on Apr 07, 2008

  • 1 Answer

SOURCE: Kodak z1275 easy share camera

never use kodak again!!!

Posted on Dec 17, 2008

  • 297 Answers

SOURCE: everytime I set time and date, camera turns off.

Memory battery present?? (coin type)

Posted on Apr 20, 2009

  • 1632 Answers

SOURCE: Can't reset Date & Time

What you have to do is go to the icon with the spanner (as shown above) and keep tabbing down. There are more options than just the ones you see in the screen (not just High Power , Auto, Set Tag, On), keep going down and it will show you the other options. You will see the date change icon about 7 or 8 down.

Posted on Jun 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have never set date on my camera. What do I need to do to accomplish this? Do I needsoft ware, any cords, etc? Tried to go by instructions on line but it didn't work. What am I missing? Thanks


Welcome to FixYa,


Hi I have here the steps on how you can update the date and time of your digital camera. You can chaged it if its your first time to set the date and then you also have here the steps if you want to changed it anytime you want.


Setting the date & time, first time

The Date and Time have been reset message appears the first time you turn on

the camera or if the batteries are removed for an extended time.

1 SET DATE & TIME is highlighted. Press the OK button.

(Select Cancel to set the date and time at a later time.)

2 Go to step 4 below, Setting the date & time, anytime.


Setting the date & time, anytime

1 Turn on the camera. Press the Menu button.

2 Press to highlight Setup Menu , then press the OK button.

3 Press to highlight Date & Time , then press the OK button.

4 Press to adjust the date and time. Press to advance to the next

setting.

5 When finished, press the OK button.

6 Press the Menu button to exit the menu.


Reminders:Depending on your computer operating system, Kodak EasyShare software may let your computer update the camera clock when you connect the camera.


I hope this steps will let you to resolved your issue.

Feel free to reply on this e-mail if this steps will work or won't work.


Thank you for using FixYa.

Mar 23, 2011 | Kodak EasyShare CX7330 Digital Camera

2 Answers

When I print photos, it doesn't show the date on the photo. Also , when I scroll down to Date/Stamp on the menu, it is always "off". And I can't change the setting. Help


You haven't said what make/model your camera is, so it is hard to advise.

Without knowing the camera, I am guessing that you may be in the wrong mode when trying to change this setting. You won't be able to change it while reviewing pictures already taken. You can only change it for pictures to be taken subsequently. Once pictures are taken, you won't be able to add the date stamp, nor remove it if it has been stamped.

It may be that it won't allow you to set this if you haven't already set the date and time in your camera. I can't see why this setting would be shown at all if it was not possible to turn it on (i.e. if your camera did not have this feature).

Nov 03, 2010 | Cameras

1 Answer

HOW DO I SET TIME AND DATE?


The Date & Time have been reset message appears after the Language screen the first time you turn on the camera. It may also appear if the batteries are removed for an extended time.
  1. SET DATE & TIME is highlighted. Press the OK button.
    (Select CANCEL to set the date and time at a later time.)
  2. Go to Step 4 below, Setting the date & time, anytime..
Setting the date & time, anytime
  1. In any mode, press the Menu button.
  2. Press autourg00205001id1456505.jpg to highlight Setup Menu autourg00205001id1561971.jpg, then press the OK button.
  3. Highlight Date & Time, then press the OK button.
  4. Press autourg00205001id1474816.jpg to adjust the date and time. Press autourg00205001id1474821.jpg to advance to the next setting.
  5. When finished, press the OK button.
  6. Press the Menu button to exit.

Aug 27, 2010 | Kodak Cameras

2 Answers

Displaying time and date when printing


The date/time cannot be deleted once it is embedded in the image. To turn off the date/time deselect the date/time stamping by following procedure:
These instructions explain how to insert the date in images.
attention:
  • The [Date Stamp] cannot be deleted from the image data once it has been recorded because the date is written in as an image.
  • When selecting [Date Stamp] , [Recording Pixels] is set to 1600 x 1200 pixels and the compression (image quality) to [Fine].
  • When the shooting mode is set to <Movie> (g0029623.gif), settings for inserting the date and time cannot be made.
  • The following explanations are provided based on the assumption that the [Shooting Mode] is set to <Program AE> (g0034813.gif).



1. Press the <Power> button on the camera.
g0046584.gif
2. Press the <FUNC./SET> (g0046915.gif) button.
g0046627.gif
3. A screen like the one below will appear on the monitor.
g0046619.gif
Select g0013174.gif [Date Stamp] (g0013171.gif) in the [Recording Pixels] section g0013173.gif.
g0013176.gif Press the <MENU> (g0046624.gif) button.


4. A screen like the one below will appear on the monitor.
g0046699.gif
g0013173.gif Operate the <directional buttons> left or right to select [Date Stamp] and set it to [Date] or [Date & Time].
g0013174.gif Press the <MENU> (g0046624.gif) button.


5. Press the <FUNC./SET> (g0046915.gif) button.
g0046628.gif
6. Make sure that the [Date Stamp] is set and the following screen will appear with the icon (g0013164.gif) in the lower-left corner of the screen.
g0046623.gif
7. When shooting with this setting, the date will be embedded in the image as shown below.
g0018302.gif
g0013173.gif [Date]
g0013174.gif [Date & Time]
warning: The date, its font and color, and the position where it is displayed cannot be changed. Also, dates and times recorded with [Date Stamp] cannot be deleted.


If you need a manual for the A480, you can download it from:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=320&modelid=18155

Please rate this solution. Thanks.

Oct 15, 2009 | Canon PowerShot A480 Digital Camera

1 Answer

Can not get dates to show up on photos


You can embed the date on image data when (Postcard) is selected. The date will be printed on your images even if it has not been set at the computer or printer.

* Ensure that the camera's date/time is set beforehand.
* Set the camera to a shooting mode (except (Stitch Assist) or Movie).
* Press the <DISPLAY> button so that icons show on the LCD screen.


1. Check that appears on the LCD monitor.
- If it does not, click here to view the procedure for changing the resolution.

2. Press the <MENU> button.

3. Select (Date Stamp) in the [ Rec.] menu using the or buttons.



4. Select [Off], [Date] or [Date & Time] using or .



5. Press the <MENU> button to exit the menu.

6. Shoot the image.
- The Date or Date & Time will be embedded into the actual image.

Jul 27, 2009 | Sony Cyber-shot DSC-S730 Digital Camera

1 Answer

Can't reset Date & Time


What you have to do is go to the icon with the spanner (as shown above) and keep tabbing down. There are more options than just the ones you see in the screen (not just High Power , Auto, Set Tag, On), keep going down and it will show you the other options. You will see the date change icon about 7 or 8 down.

May 22, 2009 | Kodak EASYSHARE M1063 Digital Camera

2 Answers

How to make date stamp option ON in Canon IXUS70 Model


Hi there, my name is Rob and I can help you.

To put the date stamp in a picture do this:
1) Make sure you have the correct date and time set in the camera. To do this:
Push the function/set button. Press the directional button down to select Date and Time.
Push the directional button to the right then down or up to set the date and time. Then press the function/set button to save it.
Then:
2) Push the selector button up to the camera icon, and press function/set. Scroll down to Date Stamp.
Scroll right to turn on the Date and Time Stamp, then up or down to until it says On.
Press function/set when your done.

That is your solution. Remember once the date/time stamp is embedded in a picture, you can't take it out.
Let me know if you have any further questions, and thanks for coming to FixYa. Please feel free to rate my solution a fixya.

Rob

Feb 19, 2009 | Canon PowerShot SD750 / IXUS 75 Digital...

1 Answer

NV24HD settings problem


go to menu-setup/settings-date time
then change it

Jan 05, 2009 | Samsung NV24 HD Digital Camera

1 Answer

Setting the date and time


jfcampbell1; i believe very carefully!!! Just kidding. On the back of the camera, you should see a menu button or setting button. All this information will appear on the LCD screen and you just push on the circular wheel back and forth or up and down until you get to date & time settings. Pushing in on the middle button inside the wheel means OK or Enter. BTW: couldn't find anything on a Digimax A503, so I had to guess it was an A502. Alot of digital cameras are available for review on www.dpreview.com. Hope this helps.

Jul 22, 2008 | Samsung Digimax S730 Digital Camera

1 Answer

Set time/date on Argus APS 400


I continued to push other buttons on the camera while the date or time was flashing untill I found that the mode button made it change.

May 21, 2008 | Photography

Not finding what you are looking for?
Cameras Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Cameras Experts

kakima

Level 3 Expert

102366 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Are you a Polaroid Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...