My ps3 workd fine i hooked it up to a hdtv and my power cord wasnt nice and i smeld smoke nad took it out imeaditly and plugd it ellswhear in and it maked sparkes and took it out and put a new power cord in and everything rund smooth and alll the ligts workd but whn i tryd it only a black screen on both hdtv and sd can u please help me how do u swith from hd to sd
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has answered 20 questions.
Re: wont show picher just black
In order to switch back from hd to sd you have to hook up the ps3 after you do that press the power button on the console and hold it down you will hear the first beep followed by another about 3-5 secs later this will reset the system back to sd
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are two places to look for the problems, the backlight inverter board and the power supply. Look at the power supply first since it is easier to get to, look for burnt parts, bad capacitors, etc. http://en.wikipedia.org/wiki/Capacitor_plague Please post back what you find.
hi there try using the ps3 as audio-cd play(blind, without screen)
with any other tv to make sure soun still is coming...
if there was a flash or circuit destroyíng the yellow(video)plug,
either the cable has been destroyed or the short backfired even into the video module of the psx3.
try exchanging the cable, if that doesn't do any good, the video module got smoked...
let a technician repair/replace it or you think about becoming the happy owner of another brand new psx3
am sure about the computer part but for the xmb i can help reset ur ps3 by turning it on then turn it off by holding the buttonthen it back on by holding the power button it should beep pause and beep 2x this will reset ur display option back to normal then ur cables make a difference if ur using a SD TV use regular cables if HDTV use hd cables only on hdtv if use on SDtv it won't display or ur ps3 is set to an hd setting like 1080p it won't display on a sdtv so reset ur ps3 by holdin power button hope this help u
Check the little switch on the av cord at the end where it goes into the xbox. If your using component most likely it needs to set to HDTV. If your using the yellow, red, and white cables then set it to TV. My tv will go all black if mine is set to HDTV when I'm using the yellow, white and red ends. I hope this helps.
you can try getting a new power cord and a/v cord or just borrowing one of your friends to try out. the problem might be your tv. have you hooked up and other videogame systems to it and you got the same problem? do you have your ps3 hooked up to hd or hdmi?
Gee I would think that it is kind of obvious; your amp is blown. Just because it doesn't blow fuses doesn't mean much. If you hook the power up to the ground input and the ground to the power and then turn it on you pretty much toasted the amplifier. If you don't know why the amp is smoking, but you're trying to fix it yourself, you are basically telling me that you have no business doing so. I have been an installer for 15 years and even I am not dumb enough to try to fix a bad amplifier. Do everyone a REALLY big favor; stop messing around with something that you don't understand of have knowledge about before you hurt yourself.