Question about Traeger Industries Grilling

1 Answer

Treager bbq keeps tripping breakers - Traeger Industries Grilling

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 150 Answers

I would strongly recommend you pull the control panel and inspect the fuse. Before tripping a breaker, your GFS outlet should trip, and/or blow the fuse.

If the unit is tripping circuits, then there is likely a short. Given the material draw from the hot rod, I would start with that. Putting a multi-meter on it to test voltage, should give you a basis to confirm with Treager if it's within spec. Sometimes it's simpler to replace the rod, but this can add up quickly if not the root issue.

Posted on Nov 27, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Louisiana BBQ grill trips circut breaker


You need to take other devices off that circuit. Also outdoor circuits usually are on a GFI circuit.which are very sensitive to flucuations.

Jul 14, 2014 | Traeger Industries BBQ070 All-in-One Grill...

1 Answer

Treager BBQ will not get hot at all.


Ensure your fire box is cleaned out and ventilation holes at the base are not obstructed. Ensure the induction fan is operating and moving air into the fire box.

According to Treager FAQ:

"I've been noticing that my grill temperature keeps dropping lower. What is the problem?
You need to "true" your auger. To do this:

Run the unit out of pellets.
Remove the allen screw and nut out of the auger and motor shaft.
Try spinning the auger shaft over the motor shaft. The auger shaft should spin freely over the motor shaft without binding.
If the auger binds, loosen the 7/16th inch bolts on the motor bracket and move bracket until you can rotate the auger shaft over the motor shaft. Then re-tighten 7/16th inch bolts. Make sure auger shaft still rotates over motor shaft, or repeat step 4 again until it does.
Reattach auger and motor shafts using the screw and nut which you removed in step 2."

Mar 05, 2014 | Traeger Industries BBQ070 All-in-One Grill...

1 Answer

Table saw keeps tripping breaker


May have a brush in the motor that's hanging up or worn may try
replacing the brushes

Feb 07, 2014 | Saws

1 Answer

Titian scr2 keeps tripping breaker


For the breaker to trip there must be a fault. The breaker is probably saving you from being electrocuted when using the water. DO NOT ATTEMPT TO BYPASS THE BREAKER. Call a QUALIFIED TECHNICIAN.

Jan 02, 2013 | Titan SCR2 N-120 - 11.8 KW Tankless Water...

1 Answer

Furnace keeps tripping the breaker changed breaker and wires all good up to the furnace still keeps tripping when i try to turn power on. nothing happened to the furnace and the wires were tested up to the...


Disconnect the black power wire where it is connected to the furnace with breaker off. Put a wire nut on it and then turn the breaker on. If it continues to trip, the problem is not the furnace and you will have to trace the power wire back to the breaker box to find problem. Next, disconnect the black wire from the breaker (with breaker off) and then snap breaker on. If it trips, bad breaker. If the furnace was disconnected and breaker did not trip, you have a short either on the P C Board or the transformer.

Mar 31, 2011 | Heating & Cooling

1 Answer

I have a square D breaker with shunt trip. The breaker keeps tripping so how do I check the breaker?


A shunt trip breaker operation.

It works just like a normal circuit breaker with one additional function. A shunt-trip breaker also has a built-in magnetic coil that can be energized externally to trip the breaker.


So what is wired to the shunt that is not letting the breaker reset?


Read more: http://wiki.answers.com/Q/How_does_a_shunt_trip_breaker_work#ixzz1EXNCP5r0

Feb 20, 2011 | Square D Qob120 Circuit Breaker With Shunt...

2 Answers

The Lights circuit breaker keeps trips without load


try a new breaker, they do wear out over time

Feb 08, 2010 | Electrical Supplies

1 Answer

Dryer trips circuit breaker


Hi,

Here is a tip that I wrote that will help you ti find out why the circuitbreaker is tripping.

Circuit Breaker Keeps Tripping
heatman101
,,.

Nov 21, 2009 | Kenmore 63942 Dryer

1 Answer

15 Amp circuit breaker keeps on tripping , as as


breaker tripping right of way means bad breaker or dead short. which means something has burned out or is wired incorrectly

May 13, 2009 | Heating & Cooling

2 Answers

Breaker keeps tripping


If the breaker itself is more than 15 years old, replace it. If it continues to switch off, check the amp draw of both the inside and outside unit.

Sep 11, 2007 | Heating & Cooling

Not finding what you are looking for?
Grilling Logo

Related Topics:

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Traeger Industries Grilling Experts

paulcarew

Level 3 Expert

2458 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Traeger Industries Grilling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...