Question about Sanyo PLC-XU105 Projector

Open Question

Power supply fuse sanyo plc xu105 - Sanyo PLC-XU105 Projector

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Sanyo PLC-XF46N projector shuts down before powering up completely

The Fix Ya rep suggested that I try the "Reset" button located next to the Audio out on the side of the projector; this solution proved to be the fix I needed. I was able to get the lamps to warm up and get into the menu to cut back the bulbs/power consumption on start-up, allowing the projector to function for a problem-free 4 hour period Unfortunately, I had the same issue this morning, but the same fix worked again.

Posted on Jul 07, 2008

  • 1 Answer

SOURCE: sanyo plc sw30 help

i had a sanyo plc sw30 wich had the same problem and it turned out to be the bulb replaced it with new one and this seemed to solve the problem. Theres a few places to get new ones but they are not cheap looking at between £150 to £180 hope this helps

Posted on Nov 02, 2008

  • 1 Answer

SOURCE: Sanyo PLC-SW30 Multimedia... Problem

sanyo_plc_sw30_multimedia_problem i need support

Posted on Aug 08, 2009

projdoc
  • 2236 Answers

SOURCE: sanyo plc sw20a dose not work with my laptop what

you need to activate the external monitor port on your laptop.

Posted on Nov 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sanyo plc-xe20 no picture


1, the lamp is ok
2,the lamp ballast is ok
3,seems that the power supply or mother board is defective

We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry Lampdeng Limited

Apr 13, 2013 | Sanyo PLC-XE20 (Chassis XE2000)...

1 Answer

Sanyo plc-sw30 i have a problem when i power on the projector , there is no power lamp on a very slow light is visible and the projector shut down and the fan are in very high power


The uProcessor thinks that it has overheated and is frantically trying to cool down what it thinks is a hot lamp.
This condition has many causes from an exhausted lamp to lamp ballast fault or even a power supply fault or a heat sensor/fan fault.

Mar 30, 2011 | Sanyo PLC-SW30 Multimedia Projector

1 Answer

Sanyo PLC-XE31, please tell me How to check the lamp usage?


1,Turn the projector on,
2,Press and hold the "Power" button for 30 seconds.
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry Lampdeng Limited

Feb 22, 2011 | Sanyo FOR PLC-XE31

1 Answer

Plc-xu105 will not restart. red on, no fans


SAYA MEMPUNYAI SANYO PLC XU105 , JIKA DIHIDUPKAN POWER LAMP MENYALA HIJAU BEBERAPA DETIK KEMUDIAN LAMPU WARNING LAMP MENYALA, KIRA KIRA KERUSAKANNYA DIMANA YA..? TOLONG YA SOLUSINYA..THKX

Feb 19, 2010 | Sanyo PLC-XU105 Projector

1 Answer

Sanyo plc-xt10a will not power up. ready light is not on. power to unit is good.


First, check the lamp/lamp door--the door has a safety interlock that prevents power from getting to the projector. Make sure the power *is* getting to the unit by using a known-good power cord. Also, check the 3 air filters. If one or more was clogged with dust, the unit might have had a thermal sensor trip. There is also an internal fuse on the power supply which may have blown.When was the last time the projector worked correctly? Have there ever been any power problems related to that unit before? If the above checks yield no success, the projector will have to be repaired at a service facility. Hope I was of some help---Rick

Sep 09, 2009 | Sanyo (6103055602) Projector Lamp for...

1 Answer

Sanyo PLC XU105 Will shut down in 10 to 15 seconds


YOU HAVE A BAD LAMP OR THE LAMP DRIVER BOARD BAD

Aug 24, 2009 | Televison & Video

1 Answer

Sanyo PLC-SW30 Multimedia... Problem


sanyo_plc_sw30_multimedia_problem i need support

Feb 27, 2008 | Sanyo PLC-SW30 Multimedia Projector

Not finding what you are looking for?
Sanyo PLC-XU105 Projector Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Office Equipment & Supplies Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

73591 Answers

k24674

Level 3 Expert

7993 Answers

Are you a Sanyo Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...