Question about Marantz UD7007 Universal Disc Player. Blu-ray, DVD, SACD, CD

Open Question

Marantz ud7007 will not connect to internet

In setup, marantz player shows the IP addresses when DHCP is set to Auto. But the player will not connect to internet

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

smarthome2
  • 1114 Answers

SOURCE: marantz SR8001fail to standby mode, will not reset

Test all your speaker impedances and check for shorts on both wiring and speakers. Use a digital multimeter. If you still have an issue, disconnect all speakers and test receiver. If you still have a problem, post a comment and I can help some more.

Posted on Aug 09, 2009

  • 53 Answers

SOURCE: How can I make my Marantz DV7004 blueray player

Try this Site, may get you going:


http://www.ehow.com/how_5091093_change-region-dvd-player.html


Read Ya,
Z

Posted on Jan 02, 2010

AlanKinNA
  • 109 Answers

SOURCE: My Marantz PMD580 does not archive recordings. I

I'd call the dealer for support. This piece of equipment is quite detailed and potentially complicated.
Yes, I'd sure call the dealer, if you have one.
Otherwise, try reading the manual, at ...
http://www.d-mpro.com/users/getdownload.asp?DownloadID=402
Alan

Posted on Mar 24, 2010

  • 1 Answer

SOURCE: what is the error POW 5 on a marantz sr 7500

I have a POW 5 failure on a marantz sr 7500. Anybody know how to fix?

Posted on Aug 01, 2010

SOURCE: Marantz sr8001: standby light blinks rapidly,

Hello there Ed.

For anyone that has ever had such an issue with a MARANTZ SR series (6001. 7001. 7002. 8001...etc...) issue a question and I do HAVE the answer.

I could be just anything, or just the low quality binding posts used by MARANTZ for that.

Please describe to me in details how you've connected your speaker wires at the back, and give me description when and how did this problem came up.

Kind regards
Evangelos

Posted on Nov 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Find proxy server address


Changing TCP/IP settings Win 7 TCP/IP defines how your computer communicates with other computers.
To make it easier to manage TCP/IP settings, we recommend using automated Dynamic Host Configuration Protocol (DHCP). DHCP automatically assigns Internet Protocol (IP) addresses to the computers on your network, if your network supports it. If you use DHCP, then you don't have to change your TCP/IP settings if you move your computer to another location, and DHCP doesn't require you to manually configure TCP/IP settings, such as Domain Name System (DNS) and Windows Internet Name Service (WINS). To enable DHCP or change other TCP/IP settings, follow these steps:
  1. Open Network Connections by clicking the Start button 4f6cbd09-148c-4dd8-b1f2-48f232a2fd33_818.jpg, and then clicking Control Panel. In the search box, typeadapter, and then, under Network and Sharing Center, click View network connections.
  2. Right-click the connection that you want to change, and then click Properties. 18abb370-ac1e-4b6b-b663-e028a75bf05b_48.jpg If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
  3. Click the Networking tab. Under This connection uses the following items, click either Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click Properties. 25e7e385-9327-4f7d-aab0-afa5aaf952ba_49.jpgThe Network Connection Properties dialog box
  4. To specify IPv4 IP address settings, do one of the following:
    • To get IP settings automatically using DHCP, click Obtain an IP address automatically, and then click OK.
    • To specify an IP address, click Use the following IP address, and then, in the IP address, Subnet mask, and Default gateway boxes, type the IP address settings.
  5. To specify IPv6 IP address settings, do one of the following:
    • To get IP settings automatically using DHCP, click Obtain an IPv6 address automatically, and then click OK.
    • To specify an IP address, click Use the following IPv6 address, and then, in the IPv6 address, Subnet prefix length, and Default gateway boxes, type the IP address settings.
  6. To specify DNS server address settings, do one of the following:
    • To get a DNS server address automatically using DHCP, click Obtain DNS server address automatically, and then click OK.
    • To specify a DNS server address, click Use the following DNS server addresses, and then, in the Preferred DNS server and Alternate DNS server boxes, type the addresses of the primary and secondary DNS servers.
    f598cd96-6bf9-47be-942d-7d0b0afdbd88_47.jpgThe Internet Protocol Version 4 (TCP/IPv4)Properties dialog box
  7. To change advanced DNS, WINS, and IP settings, click Advanced.

Mar 10, 2014 | Dell Latitude D600 Notebook

1 Answer

I'm using two Macintosh Computers. I followed the quick setup wizard, all the right lights are lit. I've reset my broadband modem, I've reset the Dynex Router. Yet I can't make contact...


Richard have you tried setting up static ip addresses on the MACs
If you have other p.c's on network with auto ip assignment then alter the DHCP server lease to 192.168.1.10 to 192.168.1.240
then make ip address static 192.168.1.241 subnet mask 255.255.255.0 default gateway 192.168.1.1 and on the other mac
make ip address static 192.168.1.242 subnet mask 255.255.255.0 default gateway 192.168.1.1
http://www.macinstruct.com/node/550

Jul 07, 2017 | Dynex DX-E402 Router

2 Answers

How do i turn on the dhcp on my wrt54g2 router


Go to 192.168.1.1
Log into the router (Default username is left blank, password is admin)
On the setup page, make sure "enable DHCP" is checked.


Jun 20, 2011 | Linksys WRT54G2 Wireless Router

1 Answer

Plycom ip330 phone - works fine when connected directly to Brighthouse modem, however when brighthouse modem connected to belkin router then to phone says - waiting for network to initialize, please help


sounds like your belkin router is not setup as a DHCP server or the DHCP is disabled. The DHCP in the belkin assigns addresses to the internal network, the error "waiting for network to initialize" means that the phone is waiting for an IP address, to which its not getting. When you connect directly to your modem you get an IP from your Internet service provider. I'll bet your internal network is setup using "static" ip addresses, if thats the case you will need to surf into the phones web console and set a static IP address. Or the opposite, enable DHCP in the belkin. hope that clarifies things a little.

Aug 28, 2010 | Polycom SoundPoint 330 IP Phone

1 Answer

I just connected my new ps3 to my marantz 7500. my tv picture is fine but no sound same goes for me ps3 picture but no sound... my fm works sirius radio works cd player works i think i messed...


http://us.marantz.com/DFU_SR7500_Final_Eng.pdf

Page 18 of the manual will walk you thru the audio setup. It has Digital auto, Digital, Analog auto, Analog. Once this is set you should be fine, if you still have an issue, post a comment and I will help you further. Hope this helps

Dec 24, 2009 | Marantz SR7500

1 Answer

My d-link router was reset and now its lock and i can't get wireless on my laptop and if i run a wire it won't go online either?my network magic shows that its connected.


Hi there.. that is right if u run a wire directly to the router it will shows that u r connected to the router but no internet connection, the setting of your router was reset and u need to configure the router setting, like the internet connection settings, if u are using a cable modem from cable isp, u need to do the mac clone of the computer that can connect to the internet to the modem, then set the router on auto-dhcp, if ur using a dsl pppoe, u need to set the router on pppoe, if ur isp gives u an ip address for static setting, u need to set the router on static ip settings, u can find the ip address settings of the isp, if ur computer is connected directly to the modem, click on start, run and type cmd, it will give u a dos prompt and type ipconfig/all and enter, it will list the ip address, subnet, default gateway and dns server.. to access the setup page of ur dlink router, pull up a browser and type in at the url:192.168.0.1 and it will ask the username and password, by default the username is admin and the pass, just leave it blank, it will show the setup page and select on manual settings for the internet connection as well as for the wireless settings.. good luck i hope this info will work, if u have any question just feel free to get in touch..

Aug 13, 2009 | D-Link DIR-615 Wireless Router

1 Answer

Help me with setting up a modem and a router


Are you able to get online directlty from modem? If yes check what is IP address you get from modem, if it is like 192.168.1.xxx, then you need to set connection type as DHCP(not PPPoE), and change router's local IP address to 192.168.2.1 , and reboot router and modem.You can try this steps:
1. Access the router setting via a browser.
2. On Setup, Basic Setup:
- Internet Connection Type unchanged as "Automatic Configuration - DHCP"
- Local IP Address changed from 192.168.1.1 to 192.168.2.1
- Settings saved
3. Clicked on Status to check if IP Address value has numbers (not 0.0.0.0). If you have zeroes, click DHCP Release then DHCP Renew.
4. Wired connection to internet OK. Wireless connection from a family PC also OK.
Good to go i thinks.Let us know.

Apr 08, 2009 | SMC Barricade 7004VWBR Wireless Router

1 Answer

Computer says connected to internet,, wont display page


usually routers are setup using DHCP... on your second computer. try going to 
start, control panel,  networkconnection,  "your LAN connection",\ properties Internet Protocol (TCP/IP) (should be checked)
Obtained Ip address automatically should be selected
Obttained Dns server automatically should be selected.
then click OK, OK to save settings...

if your router is not setup as a DHCP,it would require you to setup your ip address manually... let me know if this dont work, so  i can help u setup manually...

if it helps, try comparing the settings of your pc1 and pc2 (the network connection settings)


Feb 02, 2009 | D-Link DSL 604+ (DSL-604+) Wireless Router

1 Answer

Couldn't get internet via Wirless Router


HI! I bliv u are having some issue setting up ur router.. I will be more than glad to assist u. here are the steps u need to do:

1. press the reset button on the back of the router for 20sec..while pressing the reset button, unplug the power plug and after 2secs while pressing the reset button plug it back in and press for 30secs after that unplug the router for 15secs then plug it back in..once all the lights are solid and ok
2. connect the ethernet cable to port1 of the router and the other end to the lan port of your computer..
3. pull up ur browser then type at the url:192.168.1.1.or 192.168.0.1 or u can check the routers default gateway by right clicking the network icon on the lower right of your task bar and click on status and it will show the ip address of the computer, subnetmask and default gateway, the default gateway is the routers ip address, once u type in to the url, it will ask u the username and password, by default the username is admin and the password is 1234 or just leave it blank
4. it will show the setup page of the router. u can set the router on the specific internet setup that u have.
a. if ur isp is a cable company, normaly u need to do a mac clone on the router setup page by cloning the computer that is reg to the cable company, how to determine it. ex. the computer that is reg to the cable company is a desktop or laptop, if this computer is connected to the modem directly and u can access internet.
b. once u determined it u need to connect this computer directly to the router and do a mac clone and set ur internet settings to auto-dhcp..then save the settings and after that, unplug to the power of the modem and router, plug in 1st the power of the modem then once all lights lit, plug in the router, then once all lights lit, try to pull up a browser that ur computer is connected directly to the router.. ur cable connection shud be, cable from the modem will go to the WAN port of the router and connect ethernet cable on port1 going to the lan port of the computer..once u can access the internet, u can now access again the setup page of the router by typing at the url:192.168.1.1 and u can setup the wireless settings, u need to create a ssid or wireless name and a security..
5. If ur isp is a dsl normaly they give u a username and password to connect to the internet, ur settings on the router should be PPPoe
6. If ur isp gives u a static ip address settings, u need to set the router to isp setup.
a. how to check the isp of the isp given to u..
1. click on start
2. run
3. type cmd
4. it will show a dos prompt
5. from the dos prompt type ipconfig/all
6. it will list the ip address, subnet, default gateway, dns server
this settings should be type in to the settings on the router for static ip addressing..

With the steps that I given to you, it was mention earlier that u used the pppoe, dhcp, but not static ip, if your computer is directly connected to the adsl modem it works perfectly. this is the specs of ur modem:
Supporting 1483B bridging and routing function Supporting DHCP server, NAT/NAPT , PAP/CHAP, IP Filter, Firewall, protocol block Built-in PPPOE/PPPOA dialing..

you can try two option:

1. your modem is equip of supporting dhcp server, if u can access ur modem and set it to bridge mode so that the dhcp server wont conflict with the router bcoz the router has a dhcp capabilities as well.
2. you need to disable the dhcp of the router so that the modem will act as the server and will give ip address to your computers..

this 3rd option will be your last solution if both dont work..

try to check the ip address of the modem, if the the ip address of the modem is 192.168.1.1 and the ip address of the router is 192.168.1.1 as well, connect your computer directly to the router and change the 3rd octet of the ip address, ex-192.168.1.1 to 192.168.2.1 then your connecttion should be , the cable form the adsl model goes to the port 4 of the router and the router should be set on a dhcp settings..

I hope this solution will help you. good luck

if you have any querry pls feel free to get in touch.. good luck

Jan 02, 2009 | Linksys Wireless-G Broadband Router

1 Answer

Installed WRT54G2 With ATT Motorola DSL and cannect to internet. dsl worked fine before installing the Modem had AT&T recheck the dsl and was configeration correct was advised that my problem in...


hi there ...

your isp is at&t? please verify the ip address straight to the modem if its is 192.168.1.1 and if your modem from your isp is set to DHCP or BRIDGE mode.

IF IP address is 192.168.1.1 (DHCP)
... change the LAN IP address of the router to 192.168.2.1 or 5.1 to prevent any IP conflict
by doing this :

1. access setup page of router usually 192.168.1.1
2. under setup tab look for the ip address, change it, then save
3. click on the status tab , and look for a VALID ip address

IF MODEM is set to BRIDGE mode
.... please ask username and password from your ISP coz we would need to set your router to PPOE...
1. access setup page
2. under setup tab look for INTERNET CONNECTION TYPE
3. select PPPoE
fill in username and password
select "keep"alive
save
4. click on status tab
look for LOG in TYPe ===> click CONNECT
if connected : check a valid IP address
if authentication failed verify again your username and password from your ISP

Goodluck!


Aug 07, 2008 | Linksys WRT54GX2 Wireless-G Broadband...

Not finding what you are looking for?
Marantz UD7007 Universal Disc Player. Blu-ray, DVD, SACD, CD Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Marantz Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73698 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

75171 Answers

Are you a Marantz Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...