Question about Televison & Video
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have a solution but it is too much info for this tiny screen they have, and there is no support for photos. So, unfortunetly I have to send you to my photobucket account where I posted scanned pictures of the "Acual Manual" I hope the website doesn't get banned. Here are the five pages you'll need to set up your giant remote:
Posted on Jan 22, 2008
just buy another universal remote which is having teach method... by using this remote u dnt need any codes... just once use the remote by which the appliance is working for teaching it then u can do any operation...
Posted on Feb 06, 2008
1. Manually turn on the component you want the remote to
control (TV, VCR, DVD, satellite receiver or cable box).
Note: If you press an invalid key during the Auto Code
Search, the remote does not respond and the illuminated
ON•OFF key does not blink. If you do not press a valid
Auto Code Search key (TV, VCR•DVD, SAT•CBL, ON•OFF,
GO BACK, PLAY, REVERSE, STOP), the search times out
after two minutes. When the search times out, the illuminated
ON•OFF key blinks four times and turns off. The last
programmed code under that component key is retained.
2. If you are programming your TV or satellite receiver, go
directly to step 4.
3. To program the remote to control a VCR or DVD. The
VCR•DVD key can control only one component, either your
VCR or your DVD. To program your remote to control
either your DVD or your VCR, you must first put the
remote in the proper programming mode. Follow these
directions before proceeding to step 4.
a. Press and hold the VCR•DVD key.
The illuminated ON•OFF key
b.While holding down the
VCR•DVD key, press and release
the number 2 key on the keypad to
control a VCR or the number 3 key
to control a DVD. The illuminated
ON•OFF key blinks, and then turns
c.Release the VCR•DVD key.
The illuminated ON•OFF key
blinks four times and then turns
off. Your remote is now either in
VCR or DVD Programming Mode,
depending on which you chose.
Proceed to step 4.
4. Press and hold the component key
(TV, VCR•DVD, SAT•CBL) you wish
to program. The illuminated ON•OFF
key turns on and remains on.
5. While holding the component key
down, press and hold the ON•OFF
key. The illuminated ON•OFF key
6. After holding down both keys for
three seconds, the illuminated
ON•OFF key turns back on.
7. Release both keys. The illuminated
ON•OFF key remains on.
TIP: Throughout the programming of each key, be sure to
keep the remote pointed at the IR sensor of the component you
are currently programming the remote to control.
8. Press and release the PLAY key,
then wait five seconds to see if
your component turns off. If your
component does not respond,
continue to press the PLAY key
every five seconds until your
component turns off. Each time you
press the PLAY key, the illuminated
ON•OFF key blinks and a block of
10 codes are sent to your component.
This process continues until all of
the codes in the Code Lists have
been searched. (If your component
has not turned off after all codes have
been searched, the illuminated
ON•OFF key blinks four times and
turns off. The Auto Code Search
Entry method is exited.)
11. To confirm that the component key is programmed with the
correct code for maximum functionality, test the component.
Attempt to control a variety of the component’s functions
with the remote. If some of the features of your components
do not work, try programming the remote with a different
code in the list until you find the code that allows the remote
to control the majority of your component’s functions.
Different codes can provide different levels of functionality.
Posted on Mar 26, 2009
I have the exact same model and it came without a remote. I was able to set it up so I can work it off of the Comcast 3 in 1 remote but the button layout is extremely confusing. I am currently looking for a replacement remote that would be easier to use since my wife can not get it to work at all off the Comcast one. Follow the instructions in the Comcast Remote Guide and you will find a code to make it work by doing a random search you just have to keep trying it will take some time.
Posted on Apr 01, 2009
Tips for a great answer:
Dec 25, 2015 | Emerson Televison & Video
Sep 19, 2015 | RCA (DTA800B1) Video Converter
Oct 29, 2014 | Magnavox Televison & Video
Nov 25, 2012 | Philips SRU2103S-27 Remote Control
Oct 15, 2012 | Emerson LC220EM2 Remote Control
Aug 20, 2012 | Emerson Used Original NF015UD Remote...
Jul 25, 2012 | Emerson Televison & Video
Sep 07, 2009 | Emerson Televison & Video
Dec 04, 2008 | RCA Universal Remote Control
Sep 23, 2017 | Televison & Video
111 people viewed this question
Usually answered in minutes!