P200 reset bios

just to irritate guys like you

A$ is not a U.S. size. you should although be able to override it in the menu mode, but it will be smaller and may cut off text or image.

pull the power cord....let it sit unplugged over night...plug in the next day....go to reset default.....try to change the date and reset.....

See this... http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/cannon-printer-mp160-ink-absorber-full/bb6ae993-d065-e011-8dfc-68b599b31bf5

1) you CAN rESTORE The machine going to panel control and see restore to some date that was working good.Otherwise is download the BIOS from toshiba accordsing the version that you have. press key f1 , and Reinstall the new version BIOS.God bless you

Try pulling batteries/power /out/off.look for reset hole usually a very small hole on back. push in with pin.reinstall batteries (check they are good)or use new,if power adapter plug in turn on try to print.These instructions are genetic not specifically for your model. The printing issue you describe is typically a glitch in the program.

You can download your printer's software/driver from this link:
Canon Pixma ip1200 drivers, open the link, select the O.S. (Operating System), select the Language and click "submit" and click the respective links to download.

Good luck.

Thanks for using FixYa.

Canon MP140 Error Code injet printer reset procedure:

Canon waste ink tank problem.
1. Change the waste ink absorber

2. Reset waste ink tank counter

Go to the service menu;

1. With the printer power OFF , press the Power button while pressing and holding the Stop/ Reset button.
NEXT
2. When the Power is ON, hit the Stop/Reset button 2 times while pressing and holding the Power button.
NEXT
3. When releasing the Power button and the Stop / Reset button , the printer will go into a service mode.
NEXT
4 When the ON-OFF lights in Green, hit the Stop/Reset button the specified number of times according to the function listed in below.
NEXT
Each time the Stop/Reset button is pressed, the LED lights in orange and green, starting with orange.
NEXT
Hit 4 times for waste ink counter reset.

The number of the Reset button pressing LED
0 time ... Green Power off
1 time ... Orange Service pattern print
2 times ... Green EEPROM print
3 times ... Orange EEPROM reset (EEPROM reset)
4 times ... Green Waste ink counter reset


On the end press POWER button to exit .




FOR USE IN : Canon PIXMA iP1200, Canon PIXMA iP1600, Canon PIXMA iP1700, Canon iP1800, Canon PIXMA iP2600, iP6210D, PIXMA iP6220D, iP6310D, Canon PIXMA MP140, Canon PIXMA MP150, Canon PIXMA MP160, PIXMA MP170, Canon PIXMA MP180, MP210, Canon PIXMA MP450, MP460, MP470, Canon PIXMA MX300, Canon PIXMA MX310, Canon PIXMA MX470

Just flip it out and you can order one at office max. It just clicks right in...

Check this url out...

http://www.officedepot.com/a/browse/p200-dhiii/N=5+325133/;jsessionid=00003njCXd20m6tI7ltdY3TGmWw:13ddq0tng

They are reasonably priced too...


cmhimg