Question about Russell Hobbs 13153 Iron
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
it is important to check the continuity of the coil as the power indicator is a neon and will show up as the power comes to the circuit. So what is required is to check if the coil or the thermostat control is defective and so does not heat.
If you can contact the Russell hobbs web site - support and post the part code of the set it will be traced to be under warranty and it is possible that you can get support for help...just in case the coil has opened.
Posted on Apr 01, 2011
SOURCE: My russel hobbs iron is
This is a problem with the thermostat- possible that the bimetal is stuck or short or changed in alignment causing the power to be connected at all times and not cutting off.If you can remove the unit then this can be seen by checking the cut off of the control.
Posted on Jul 01, 2011
SOURCE: I have so far seen
I would write to russell hobbs and complain, my friend bought one of these 18 months ago and hers got hot but no steam through. She sent it back to them and they sent her a new one as a gesture of goodwill.
Posted on Aug 21, 2011
Tips for a great answer:
May 01, 2017 | Russell Hobbs Irons
Jul 05, 2016 | Russell Hobbs 13153 Iron
Apr 09, 2015 | Russell Hobbs Irons
you have to access the iron from the top or from the heal. the base is solid and can not be accessed from the bottom look on the heal plate of screws then the top should lift foward.
I hope this was useful
May 01, 2014 | Russell Hobbs 15129 Slipstream Iron
Jan 20, 2012 | Russell Hobbs Irons
Aug 04, 2011 | Russell Hobbs 13153 Iron
Apr 01, 2011 | Russell Hobbs 13968 Iron
Jan 19, 2011 | Russell Hobbs 14084 Iron
Sep 14, 2010 | Irons
Jan 26, 2010 | Irons
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: