Question about Precor EFX 546i Elliptical Version 4

1 Answer

Ramp wont go up or down says stuck key - Precor EFX 546i Elliptical Version 4

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Precor Master
  • 914 Answers

Probable Cause 1. A key is permanently depressed on the display.
2. An interface chip (IC) has failed in the upper PCA's keypad.
3. Liquid (cleaning solution or sweat) may be on the surface of a touch sensitive display.
Corrective Action

  1. Disconnect the keypad cable from the upper PCA. Reset power to the machine. If the Error 05 is eliminated, the keypad is the cause and should be replaced.
  2. Disconnect the keypad cable from the upper PCA. Reset power to the machine. If the Error 05 still appears, the upper PCA* is the cause and should be replaced. *Upper PCA's most commonly do not come with software. Remove the software (chip) from the existing upper PCA prior to replacement and install into the new upper PCA.
  3. Wipe away all liquid from the touch sensitive display. Reset power to the unit. If the Error 05 is eliminated, the liquid was the cause.

Posted on Jan 28, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My treadmill won't go down the platform how to lower it please help


If it is stuck in the incline position all you need to do is re-calibrate most of the time

The first step to re-calibrate the incline. ProForm provides calibration instructions in the treadmill owner's manual.

Hold down the "Stop" button and the "Speed" up button. Insert the safety key into the console then release the "Stop" and "Speed" buttons.

Press the "Stop" button then press either the "Incline" up or down button. Wait while the treadmill raises then lowers the incline ramp. Press the "Stop" button and remove the safety key.

Hope this helps or solves the problem, if you have any further questions please do not hesitate to contact us at 888-713-2880 or visit us online at

http://www.sportsmith.net/supportsearch.aspx

May 18, 2015 | Proform 1050T Treadmill

Tip

Safety concerns with car ramps.


Alot of people feel just a little bit uneasy when it come to getting under a car when on car ramps. A little trick is to drive the car on the ramps, put blocks, or wheel chucks behind the grounded tires. Then using a jack, jack one of the ramped tires up enough to remove its ramp. Reverse that ramp and then lower the vehicle down. It can't roll down the ramps because it is wheel locked inplace. Please though reverse that prcedure to drive it off the ramps.

Please note, I selected Chevy as the manufacturer only because 'any' is not an option

on Dec 08, 2009 | Chevrolet Chevy Cars & Trucks

1 Answer

My wife was mowing with our Husqvarna ride on CTH2038 and it started reving really fast so she disengaged the deck and ramp the throttle back to min but it kept reving so she shut it down with the key


Best thing I can recommend is to carry it to a trusted repair shop for them check it out for you.

Sound like governor control came loose or the governor self destructed. Without the age of the mower don't if the warranty will cover the repairs but the engine will need at least repaired if not replaced.

Oct 19, 2014 | Husqvarna Garden

1 Answer

Will not shift out of park


the shifter lever is stuck?
or the lever move to drive but car dont move.
its on ramps so the parking pawl in tranny is not jammed.
does the side of transmission, selector move correctly with
console lever action.
is this a park lock out feature failure.
or is the tranny ACTUALLY stuck in park with its lever in DRIVE
lever on side of trans , no car?

Jul 22, 2014 | 2002 Isuzu Rodeo

1 Answer

Ramp on my precor 456i won't move


Chances are there is a stuck key on the keypad. Normally the only way to correct this issue is by replacing the overlay and keypad. http://www.sportsmith.net/ Use your serial number to find the correct item for your version.

Dec 27, 2013 | Precor EFX 546i Elliptical Version 4

1 Answer

Ramp is stuck


Replacement Parts for Fitness Exercise Equipment at SPORTSMITH

This is commonly caused by a bad overlay/keypad. The only solution to resolve this issue is to replace the overlay/keypad.

Please use your model and serial number to find the correct replacement at the following link: Precor Equipment Repair Parts Treadmill Belts Ramp Sleeves SPORTSMITH net

Dec 27, 2013 | Precor EFX 546i Elliptical Version 4

1 Answer

1995 Ford Aspire won't crank, won't start


Find and replace the ignition SWITCH, not just the key switch.On most cars it's down the steering colum actuated by a rod from the keyswitch. don-ohio

May 12, 2017 | 1995 Ford Aspire

1 Answer

The volume ramps to maximum. I can adjust it back


Sounds like the circuit board for the button keys in front has a shorted tactile switch causing sound to keep increasing, Replace all switches on this board or get new board. I believe it is called a HS board or very close to that.

Dec 30, 2009 | Sony FD Trinitron WEGA KV-32FS200 32" TV

4 Answers

Key is stuck in ignition and car wont start


When the battery is dead, the key cannot be removed. You can either charge the battery, and remove the key or, there is a access panel (small) under the steering column, remove this, and push a small pluger to the left, while holding the plunger, remove the key.

Dec 27, 2008 | 1997 Saturn SL

Not finding what you are looking for?
Precor EFX 546i Elliptical Version 4 Logo

Related Topics:

298 people viewed this question

Ask a Question

Usually answered in minutes!

Top Precor Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Howard
Howard

Level 2 Expert

115 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Precor Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...