Question about Apple iPod Audio Players & Recorders

1 Answer

Unlock code the passcode and think of it

Posted by on

Ad

1 Answer

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, seeiTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:

After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.

Posted on Jan 01, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi my GT-C5010E is asking for network passcode. my IME is 352615 04 096771/2.


Do you want network unlock passcode for your samsung gt-c5010e mobile?Yes means you can visit this site Prounlocking.com here you can get the network unlock password and unlock your mobile easily. To get the code you have to mentioned which country is locked now,network provider and imei number. Then they send unlock code through email
Prounlocking.com

Feb 25, 2015 | Cell Phones

1 Answer

How do i unlock my pass code


Do you want to unlock mobile passcode ? Do you want to remove carrier lock passcode from your phone ? If so, whats your mobile brand and model ? to unlock your phone, use unlock code . You can get it from any of the online vendors like WickedUnlock.com to unlock it .

Sep 23, 2014 | Coveroo Utah Jazz - Jazz Note Design On...

1 Answer

How to remove passcode


Do you want remove your mobile network lock passcode? Yes means you can visit this site Superunlockcodes.com here you can get the network unlock passcode and remove your mobile network lock pass code easily. To get the code you have to mentioned your mobile brand name,model,which country is locked now,network provider and imei number. Then they send network unlock pass code through email.
Superunlockcodes.com

Sep 06, 2014 | Cell Phones

2 Answers

Haven't used my rim in ages, so forgotten the passcode to get into the phone. Is there anyway of unlocking/reseting it at all?


Maybe you can unlock your phone using blackberry 7290 unlock code, that code can be obtained from network provider or buy from blackberry unlock code seller on internet. Other way, you can bring your cellphone to mobile repair shop to get hard unlocked using cable unlock.

Aug 14, 2011 | RIM BlackBerry 7290

1 Answer

My television says it's locked and i don't know the personal code to unlock it. what can i do?


Hello
I thinks that you have forgotten the passcode of your Mitsubishi VS_45609 projection TV. You can make it alive without knowing the passcode. Please follow
V_Chip lock bypassing prodedure is as follows
You can view your locked TV, cancel the lock, or enter the V_chip lock menus.

This is done by pressing the number "9" and "QV" buttons on the remote TV control at the same time, when your passcode is requested. This process temporarily unlocks the TV.
When entering the V_Chip lock menu, this process deletes your old passcode and prompts you to enter a new passcode.
Do the things properly. Ok.

Oct 22, 2010 | Mitsubishi VS-45609 TV

1 Answer

Forgot pin want a code to unlock it


You are going to have to send this back to Garmin, they have a way to unlock the unit, but they are keeping it quiet, also have your cheque book ready, think they charge for this. Sorry

Jun 11, 2010 | Garmin Nuvi 660 GPS Receiver

1 Answer

I forgot the passcode.


the 205 used a dual security system in case your device is stolen. first is the 4 digit code, and second is when you set your code, you lso set a "my location". if you are out of the vicinity of "my location" you must use the passcode to unlock it. If you are in the vicinity, the gps will automatically unlock when you turn it on and avoid the passcode request. if you don't remember the passcode, or the "my location" point, you must send the device back to Garmin (along with proof of purchase-or your registered info)-to ensure it is not stolen-, and they will unlock it.

Mar 30, 2010 | Garmin nuvi 205W GPS Receiver

1 Answer

Unlock nokia 3310 security code. i've forgotn it & now i can't insert a new sim


  • Enter the 15 digit unlock password (#pw+ 15 digit unlock passcode will
display on screen)
  • Press ‘*’ key two times quickly (#pw+ 15 digit unlock passcode + will display on the screen)
  • Press ‘1’ key once
  • (#pw+ 15 digit unlock passcode +1 will display on the screen)
  • Press ‘#’ (SIM Restriction OFF will appear on screen for 1 second)
  • The handset is now unlocked

This wil help u to unlock your mobile ..... try it

Mar 05, 2009 | Nokia Cell Phones

2 Answers

Forgot passcode to unlock messages


You cannot bypass a user set security code.  I would recommend trying to remember the pass code or go to a private cell phone dealer and see if they have the ability to re flash your phone.

Jan 07, 2009 | Motorola Mobility MoroKRZR K1m Cellular...

2 Answers

Mitsubishi HD Diamond series WS-55907


Good day k g;

I think the code is oooo.

If not let me know and I will double check.

Good Luck, Big Irish.

Jun 15, 2008 | Mitsubishi WD-52525 52" Rear Projection...

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Audio Players & Recorders Experts

Sean Cole
Sean Cole

Level 2 Expert

250 Answers

kakima

Level 3 Expert

102366 Answers

TO Lady

Level 3 Expert

638 Answers

Are you an Apple Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...