Whirlpool dishwasher quiet plus 940 series. When I press the normal button, the light comes on, I hear a click, but the thing won't start. Any ideas?

6ya staff

• 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Download 6ya

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

Ron Marek

• 878 Answers

SOURCE: Dishwasher won't start

Kaclf, If you have no lights at all, dishwasher unresponsive, it's probably one of two things. First check the junction box where the cord hooks up to the dishwasher. Sometimes I find a bad connection in the wire-nut. Second, there is a thermal fuse that sits on the control board. You will have to remove the inside panel. You want to see if it's blown. It will be sitting on the top side of the board, two wires going to it. Catriver

Posted on Dec 30, 2007

SOURCE: Maytag Quiet Series 300 Legacy Series Dishwasher

Mine was doing the same thing and I just pressed and held down the heated dry button until the light went off. Then I was able to start my machine as usual. Hope this works for you.

Posted on Jul 02, 2009

SOURCE: My Whirlpool quiet wash plus 940 series is stuck on "lock out"

Same problem and I was about to call for service. Opened the dishwasher to get the model number and noticed a sticker stating to hold down the Heated Dry button for 5 seconds to clear the lock light. Worked for me!

Posted on Aug 23, 2009

SOURCE: my maytag 200 quiet series dishwasher has a button

The control panel has bee locked. Press and hold the heated dry button for 3 seconds until the light next to the lock "3" button goes off. This feature is to prevent small children from starting it. Locking the controls works the same way, hold the heated dry button for 3 seconds will turn it back on.

Posted on Jan 15, 2010

SOURCE: Whirlpool Quiet Wash Plus (927 Series) no longer turns on

water wont drain from dishwasher

Posted on Jan 29, 2010