Question about Hotpoint Dryers

1 Answer

Hotpoint dryer nvl333eyoww, Motor runs, heating

Hotpoint dryer nvl333ey0ww, Motor runs, heating element is good ,thermostats all check out still no heat. Diagram shows a switch on motor if this is bad would this cause my problem? And is this switch replaceable without buying a new motor?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Did you ohm out the thermal overload?

Posted on May 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY HOTPOINT AQUARIUS TCM580 CONDENSER DRYER STOPS WORKING AFTER ABOUT FIVE MINUTES USAGE AND IN SO DOING TRIPS OUT THE MAIN HOUSE FUSE, WHAT CAN CAUSE THIS PROBLEM


DRYER OVERHEATING:

Heating Element
A defective heating element can make a dryer too hot. If the element partially shorts out, it can produce heat all the time, regardless of whether the dryer is calling for heat. Remove the heating element to inspect it. The coils should not be touching each other or anything else.

Other Causes and Conditions
Air Flow Problem
Dryers need good ventilation to work properly. If the vent is clogged it can make the dryer too hot. Clean all of the vent tubing thoroughly.

Cycling Thermostat
Although not common, a defective cycling thermostat can make the dryer too hot. The cycling thermostat is supposed to turn on and off the heat to maintain the proper temperature. If the thermostat is defective it may keep the heat on too long. The thermostat is not adjustable or repairable, it must be replaced.

Felt Seal
Most dryers have a felt seal at the front and rear of the drum to keep the heat inside the drum. If the felt seal is worn away or missing, the dryer may keep heating and make the dryer too hot. This is not common.

Blower Wheel
A defective blower wheel will not spin properly and will not vent the hot air, making the dryer too hot. Check to see if there is adequate airflow out of the dryer.
https://www.youtube.com/watch?v=3m5NZvY9V5Q
GOD IS still GOOD !!!!

Oct 05, 2014 | Hotpoint Dryers

1 Answer

Hotpoint dryer (nvl333eyoww) not heating


The thermostat and element are mounted on the back wall of the dryer. To gain access you must remove the drum. Here is my home movie:
My home movie and repair photos for GE hotpoint dryers

Dec 02, 2012 | Hotpoint Dryers

1 Answer

My hotpoint dryer doesn't heat up, it runs but the air is not warm to dry anything. Can you tell what is the problem?


dismantle the top and front covers,then test the heating element,high limit thermostat on the element housing,then,check the cycling and thermal fuse on the blower wheel housing for continuity

Mar 03, 2011 | Hotpoint TDC32 Electric Dryer

1 Answer

Does not heat up every thing else seems to be working


try flipping you breaker off and on 2 or 3 times (hard and fast) if this don't work check element, timer , thermostats and safety switch on motor 2 heavy red wires (check wiring diagram for pin numbers of safety switch)....if this switch goes bad the motor will still run but it wont let power go to element

Aug 17, 2009 | Hotpoint TDL15 Electric Dryer

1 Answer

Hot point model nvl333eyoww will ot dry clothes


your dryer has a belt switch go here to see it www.repairclinic.com once there enter your model # and it will show you your parts

Mar 10, 2009 | Hotpoint NVL333EY Electric Dryer

1 Answer

Long time to dry clothes


The dryer has one of its rows of heaters open. Open up the dryer and check the coils behind the drum. read more

Mar 09, 2009 | Hotpoint NVL333EY Electric Dryer

1 Answer

Hotpoint dryer nvl333eyoww


You need to check the heater element and or thermostats for continuity. You will need a meter to do this
Replace if found to open circuit.
Plz rate this solution.
Thanks.

Dec 17, 2008 | Hotpoint NVL333EY Electric Dryer

1 Answer

Its a maytag dryer will not dry ,check heating element - good, checked thermostat - good, What else should I try?


please check if the motor is running. there is still a switch in the motor in series with the heating element so that it won't heat if the motor is not running.

Jun 21, 2008 | Maytag Dryers

2 Answers

Heating elements will not heat


If you dryer is running but not heating then you may have one of the following problems.
Make sure you have 220-240 volts to the machine. If one leg of you breaker has kicked you will only be getting 110 volts this will cause the dryer to run and not heat. Simply kick the breaker off and back on to fix.
If you have enough voltage then you may have a bad thermostat, thermostats or heating element. I recommend you take your heating element off and look for broken lines.check continuity if possible. If the heater is good then go to the thermostats. Check continuity. Replace if you find a bad one. Good luck and I hope this helped. mca0824@aol.com

Apr 29, 2008 | Hotpoint NLL113EYWO Electric Dryer

1 Answer

Hotpoint NVL333EYOWW electric dryer


If it doesnt run at all its nothing to do w the thermal aspects at all. The motor would run regardless just no heat. Check all paths electrically to the motor and be sure to check the motor itself.

Apr 13, 2008 | Kenmore 62882 Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dryers Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

shaun taylor

Level 3 Expert

1525 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Hotpoint Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...