Setup proscan tablet

Question edited for clarity.
Question moved from Televisions.

https://www.google.com/search?q=Proscan+Elite+tablet+%5C+DVD+combo.+turn+off+content+lock

..

The model doesn't exist. All question need
'make model (what it is)', first 3 words and in that order.

"channel button". is it a television? Reset would be in Settings / General. You have the Remote? All sets need a Remote.

https://www.google.com/search?q=proscan+3373a

They make a lot of stuff!

Proscan Video - TVs, tablets, DVDs, and camerashttps://www.proscanvideo.comProscan manufactures and distributes quality electronics & appliances such as Televisions, Tablets, DVD systems, portable and home stereos, and cameras.‎Contact Us · ‎Television · ‎About Us · ‎Manuals & Downloads Proscan Tablet reset, Standard Android Hard Reset.

Do a factory reset.

Factory Reset on Proscan PLT7223G or Tablet Vol Rocker


Factory Reset on Proscan PLT7223G or Tablet


Zolygon Factory reset Proscan PLT7223G Android Tablet


Locked out of Proscan ID PLT7223G

you have to go into setting and set to manufactures settings. look for pin hole that states reset

now if you have a password already and you setup the password already that trying to bypass the password setting you will need the password in order to get to those setting i think.

you could go to website for the manufactures look up lost pass word bypass, or FAQ section, or if technical support can help you if you done all this already .

Greetings
I would be happy to help you with this but need some basic info first. What is it you want to speed up? The actual system or your internet connection? If you post some more info on what is the basic configuration and what you want to fix I would be happy to assist you more.
Chadman

http://www.myscantool.com/downloads/proscan14_manual.pdf

I'm not an expert on this particular machine but please try this method:

1. Press Power button for 2-3 seconds and select Power off.
2. Press and HOLD the Volume Up button.
3. Press Power button and release it. Still hold Volume Up button.
4. When you see the Android screen, release all buttons.
5. Press both Volume Up and Power buttons for 2 seconds.
6. You should then see a blue menu. Use Volume Down to select wipe data / factory reset. Press Power to select.
7. Use Volume Down to select Yes - Delete data. Press Power to reset
8. Select Reboot system now. Press Power to reboot.
9. Setup your tablet again and use it as a new tablet.

I hope this helps - Good Luck.

well its sounds like the problem starts from when you downloaded the stock firmware and it basically affecting the touch sensivity of the tablet ,and you send when you flashed it still the touch remain the same meaning it didnt work fully .so maybe you need to flash it again and restore factory settings

how do i unlock my proscan tablet