Question about SYMA Toys industrial New Syma S107 Radio Remote Control Helicopter

2 Answers

Do the helicopter itself have a on/off switch..tech-one gallant

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 996 Answers

Yes it has, micro sized unde side or mmay be model wise

Posted on Jan 21, 2015

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

After fights between teh kids (he's crashing my helicopter) I think I figured it out. The instructions says to select the frequency on the helicopter, but there is no switch. When you first bring up the helicopter and controller, sometimes the green light on the controller blinks a few times. That is it synching up with the helicopter. After you charge the helicopters, turn then both off, Then turn on one helicopter and one controller. The key is when the green light above the one off switch is blinking. I did it with trial and error, so I am not sure exactly how to get it in the mode where it is in pairing mode. RIght now I am reluctant to mess around with it because they are set correctly and the kids are playing with them. I will post later if I figure out the exact sequence for getting them in pairing mode

Posted on Dec 27, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to an Expert (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I charge my Tech Toyz Aeroblade tactical wireless indoor helicopter? No manual.


The helicopter charges off of the batteries in the controller as follows:
  • Connect the helicopter to the controller as shown in the picture. Make sure there are good batteries in the controller.
  • Turn the helicopter off.
  • Turn the controller on. The red "power" light and the green "charge" light on the controller should come on.
  • When the green light turns off, the helicopter is done charging.

Apr 14, 2015 | Toys

1 Answer

Just purhased two Tier-One Gallant helicopters. They say they are 3 channel. I see no channel selectors on remote or helicopter. I want to fly two of them but don't think I'll be able to unless I have them...


You cannot easily change the frequency these helicopters operate on, they are not designed for multi channel use. To change their operating frequency you would need to find and replace the small crystal inside the helicopter and also inside the remote control.
The 3 channel you are referring to is the number of functions (channels) you can control on the helicopter, not it's frequency channel.

Dec 31, 2013 | Air Hogs Havoc Heli Helicopters

1 Answer

Aeroquest Gold Edition Helicopter (item no 50830) - Channel switched by accident


bottom rotors are both B rotors and A rotors on top. had the same issue and now in flight

Dec 26, 2012 | Toys

1 Answer

We bought an air hogs helicopter that takes pics and video. It has just stopped working. Any ideas as to what could be wrong? I replaced the batteries in the remote.


The circuit on the helicopter itself tied to the on off switch has failed. I would email the manufacturer they depending on the time you have had it will replace it or repair it

Jan 23, 2011 | Air Hogs Havoc Heli Helicopters

2 Answers

We have two gyros S107G remote control helicopters. the instructions say to "set the band selector on the transmitter and helicopter to the same frequency." the switch on the transmitter is...


Had the exact same problem. Found the solution on an Amazon posting:

1. To enable this function make sure both remotes and both helicopters are off.

2. Set the first remote's channel switch to the leftmost position (it says A, B, and C, but the s107 only supports 2 channels). Turn the remote on.?

3. Turn the helicopter that you would like to bind to the remote on and set the helicopter down on a flat stable surface for about 5 seconds. Try the throttle and the helicopter should respond to this remote.?

4. Next, to enable the second helicopter, set the second remote's channel switch to the rightmost position (it says A, B, and C, but the S107 only supports 2 channels). Turn the remote on.?

5. Turn the second helicopter on and set the helicopter down on a flat stable surface for about 5 seconds. Try the throttle and the second helicopter should respond to this remote.?


This worked for us.

Dec 25, 2010 | Air Hogs Havoc Heli Helicopters

1 Answer

Find charger for world tech rc helicopter skyhawk


good day,
hope this link below will help tp solve your problem.

toys

Apr 30, 2010 | Worldtech Devices World Tech 14422 multi 4...

10 Answers

Need blade for world tech skyhawk helicopter


Syma DragonFly 9093 or 9083 rc heli... has the same exact size tail blade... just put one on myself... works fine..

Dec 23, 2008 | Toys

Not finding what you are looking for?
SYMA Toys industrial New Syma S107 Radio Remote Control Helicopter Logo

317 people viewed this question

Ask a Question

Usually answered in minutes!

Top SYMA Toys industrial Toys Experts

MeAndMyBrain

Level 1 Expert

52 Answers

Terry Hair

Level 3 Expert

4134 Answers

GI Consulting

Level 2 Expert

112 Answers

Are you a SYMA Toys industrial Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...