Question about Konica Minolta bizhub C250 All-In-One Laser Printer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Abnormally high toner density detected TCR sensor board
- The T/C ratios detected by the TCR sensor board (TCRSB) are above the threshold for the detection of abnormally high T/C ratio for three successive times.
- The connector between MFPB to TCRSB is disconnected.
Error Codes Konica Minolta bizhub 215
Posted on Mar 07, 2015
Some one messed with your marketing area for the machine for example the machine thinks it a 19 paper per minute machine when it is really a 22 page per minute machine, need a tech to come out reset the proper setting or the the copier. Or the machines operating system firmware thinks it is one when it is the other, which requires the tech to download from a secure Konica Minolta Web site for dealerships and KMBS They like to protect there company's firmware. Sorry
Posted on Jan 15, 2016
I have solution for this problem now. I tried alot to sought out this C2558 error in bizhub 215 & 195 but i got failed. But now i have a solution for this error after wasting my 2 days & searching data, youtube, website, manual, installation guide & more. Here is solution for this C2558 Error in Konica Minolta Bizhub 215 & 195 :-
Step-1. You need to change your developer(a packet pouch of developer), if you have not done yet. if you have already changed your developer then jump to step2. (Note - for installing & refilling devloper into the cartridge check other guide on youtube for how to re-fill developer.
Step-2. Be Carful there should be no Toner bottle. Don't get confused with tonner bottle & developer both are different. so remove tonner bottel from machine.
Step-3. switch Off & re - switch on the machine .
Step-4. when machine finish warming after that - Press UTILITY (tool) button. Then Enter service mode by pressing the buttons [Stop],  , [Stop],  . (Note you should press this sequence in continous). The display shows the service mode.On the menu SERVICE WITH chioce press [OK].Use the buttons next to the display and select menu FUNCTION.
Step-5. Press [OK].
Step-6. Use the buttons next to the display and select the menu AUTO ADJUST TCR.
Step-7. Press [OK] and set ATDC. For about 2 min. the following message appears: TCR TCR AUTO ADJUST GAIN: ### where ### is the number
Step-8. Turn the machine off the main switch.
(finished if there is no error message , you can check print without tonner bottel. after that if there is no error message of c2258 then you can put bottle inside)
If the machine displays an error message C2557 or C2558, check whether you have correctly connected terminal, which is detached when removing the developer.
Posted on Jun 09, 2016
Tips for a great answer:
Jul 30, 2015 | Konica Office Equipment & Supplies
Mar 07, 2015 | Konica Minolta Office Equipment & Supplies
Jul 14, 2014 | Konica Minolta bizhub Office Equipment &...
Apr 03, 2014 | Minolta bizhub 180 Black and White Copier
Jan 24, 2013 | Konica Minolta Office Equipment & Supplies
Jan 15, 2013 | Konica Minolta bizhub C450P Laser Printer
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: