Question about Onkyo TX-SR806 Receiver

Open Question

Loud pop, then turns off

No signal

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tc-p50g10, loud pop and then tv went out with a 3 flash signal and then pausethe 3 flash repeated


loud pop can be a bad fault on the power board. would think it would be the upscale side of the power board. big 3 pin voltage controller. it will also blow in front of it. you will be able to test it with a meter.

Nov 11, 2013 | Panasonic TC-P50G10 Plasma TV

1 Answer

TURNS ON MAKES A LOUD POPPING NOISE SHUTS OFF BUT HEN IT TURNS ON THE SCREEN I BLOTCHY WITH COLOR


The Main Tuner signal board is dead.Replaced this board will solved this.Tries Shopjimmy.com,Ebay.com to buy a refurbish Tuner signal board for the replacement.

Mar 19, 2010 | LG 42PC3D 42 in. Plasma Television

1 Answer

My 12 inch jl sub makes one loud pop when i shut off my truck off why is this?


The "pop" that you hear when turning off the system is caused be the amp not shutting down clean. This can be caused by several things -like a poorly designed or built amp. It can be caused by a poor chassis ground cable, poor line voltage coming into the amp, or a malfunctioning amp (if it didn't used to do this before). It may also be caused by the line-out signal coming from the head unit. If the head unit has a problem with the pre-amp section and sends the "pop" signal to the amp, the amp will just do what it's told to.

I would recommend starting with making sure that you have a solid power and ground connection from the battery and to the chassis. Next, I would try turning down the amp's gain if it's set too high and see if that helps.

Mar 05, 2010 | Jl Audio 12W3 Car Subwoofer

1 Answer

I'm getting a loud "popping or clicking when i plug the sub in. also i noticed the green light comes on immediatly when the loud popping begins. the loud popping dosen't stop untill i unplug it


What's feeding it? The sub comes on automatically when it senses a signal, which seems to be what it's doing. Perhaps the loud clicking is originating at the other end of the cable.

Jan 27, 2010 | JBL PSW-D110 Speaker

1 Answer

LG 50PX5D, I heard a loud pop and the screen went


Ur Main Tuner signal board is dead.Replaced the Main Tuner signal board will solved ur picture problems.

Jan 23, 2010 | LG 50PX5D 50 in. Plasma HDTV

1 Answer

Tv went out after loud pop and has clicking noise does not turn on


If you have a Sony DLP, then the loud pop you heard is your lamp.  The lamps last approx. 4K-6K viewing hours.  Read your manual for replacement part number to reorder and very simple to replace yourself.

Apr 22, 2009 | Televison & Video

1 Answer

Vizio 50" Plasma VP50


Hello SuziCanevaro,

This may have been the sound of electrolytic capacitors exploding. I would not suggest plugging the set back in until you can have it checked by a qualified TV technician. If you are skilled in Electronics and would like to work on this yourself, you will need:

The schematic diagram, a multimeter, a signal generator, an oscilloscope, and an isolation transformer.

I hope this helps,

Thank you,

Shuttle83

Feb 23, 2008 | Vizio P4 46 in. HD-Ready Plasma Television

1 Answer

YAMAHA HTR 5660 MAKES POPING SOUND WITH LOUD NOISE AND BRIGHT LIGHT


Looks like you've got the best connection available - initially I thought it might have something to do with decoding the prologic signal from the analog input, but obviously not! And since you've got the audio separate from the video it is unlikely there is any interference from the video signal in the cable. Have you tried a different DVD player (I reckon that is most likely)? Also try connecting the video signal DIRECTLY from DVD to the TV if you aren't already doing so (you are anyway aren't you - the HTR 5660 doesn't have HDMI out does it?) Finally, if you have some spare cables around, try changing them - see if you get the same response when using component video cable instead of HDMI.

Jan 26, 2008 | Yamaha HTR-5660 Receiver

2 Answers

Loud Popping Sounds


If this is a heat pump system it is possible that your fan blade is hitting ice on your condenser coil.

Nov 17, 2007 | GE Zoneline AZ55H07D Air Conditioner

Not finding what you are looking for?
Onkyo TX-SR806 Receiver Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5017 Answers

The Knight
The Knight

Level 3 Expert

73635 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...