Question about Kodak EASYSHARE Printer Dock Thermal Photo

1 Answer

The dock doesn't grab the paper. and if i help it, it just jams up

My dock doesn't grab the paper and then it registers as it doesn't have any paper. load and print again.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

I had the same problem. Kodak support advised to take a damp lint free cloth ( I used a white handkerchief ) and wipe clean the center roller that grabs the paper. You can rotate the roller manually until you're satisfied you've cleaned it all. I just wiped it right to left several times and all was ok again. I didn't see any residue at all on the handkerchief but there must have been something that was there. Anyway, I think this'll work for you also.
Now if I could only figure out why my printer dock plus is only printing the lower part of pictures even though I installed new ink cartridge. Kodak advised to tighten slack in cartridge. There was not any noticeable slack. Still a no go.

Posted on Jun 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi There my SAM4S is showing PEA on the screen. All the buttons are locked also. I have unplugged and it doesn't change anything? Can you help?


I have a SAM4s register. When it read "PEA" all I did was pull the receipt paper. It seemed to be jammed. Worked for me.

Sep 07, 2011 | Casio Parts Cash Register PC Desktop

1 Answer

Msg is paper jam when there is no paper jam


I had what seems to be a similar problem and the issue was that the rubber "feet" that grab the paper weren't grabbing anymore. So, I constantly got a paper jam reading. I read elsewhere to wipe some glass cleaner/ammonia on the "feet" so that they become "sticky" again. When I did this, the "Feet" or rubber semi-circle parts that rotate around a metal bar then started to correctly grab the paper again and the error stopped.

Aug 31, 2009 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Paper jam


hmmm..I think there is a back door on that printer..try to open it on the back of the printer...
it will allow you to grab the jammed paper..^^

turn off the printer before grabbing the jammed paper..


May 07, 2009 | Dell 962 Photo All-In-One InkJet Printer

1 Answer

Feeder grabing the paper crooked causing jams and paper unable to go through the feeder smoothly. it stops once the feeder grabs the paper.


set the paper tray size to the size of the paper...if this is ok...clean the pick upo roller with damp cloth and soap water...if this doesnt help ...change the pick up roller..

keep me posted

May 04, 2009 | Computers & Internet

1 Answer

Printer dock does not pick up paper.


Try to clean the rubber rollers with lint free cloth. Make sure you are using Kodak Xtralife paper. At the back of the paper it should say "Xtralife".

Apr 02, 2009 | Kodak EasyShare Thermal Photo Printer

2 Answers

Paper Jam / Printer Dock Series 3


try this no promises
unplug the power cord for 5 sec
paper should feed out after resetting
DONT EVER PULL ON THE PAGE WITHOUT THE MACHINE EXITING IT FIRST. THE TABS ON THE END OF THE PAPER BREAKS OFF INSIDE THE PRINTER DOCK.
check the back of the dock for the photo to eject as well as the front.
check paper size with new one after it exits to make sure no extra pieces are stuck in printer. good luck
DONT PULL ON PAGE JAM (UNPLUG FIRST(RESETS THE PAGE OUT THE BACK/FRONT))

Mar 13, 2009 | Kodak EasyShare Printer Dock Series 3

1 Answer

Not grabbing paper


Try cleaning the rollers again and fan the paper. When you clean the rollers, use alcohol and a lint free cloth. Don't put too many sheets in the feed tray.

Feb 04, 2009 | Canon PIXMA MP170 All-In-One InkJet...

2 Answers

Kodak easyshare docking station series3


Blow out the printer with blower, there might be dust or some paper piece in the printer

Feb 24, 2008 | Office Equipment & Supplies

1 Answer

Lexmark 5250 printer


Before you put papers in tray it must reshaple make separate each other , to delete the message "off the power " on again to continue printing.

Dec 10, 2007 | Lexmark X5150 All-In-One InkJet Printer

Not finding what you are looking for?
Kodak EASYSHARE Printer Dock Thermal Photo Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Cindy Wells

Level 3 Expert

5059 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...