Question about Garden

2 Answers

I have a Simoniz 1900 presure washer and had to take it apart to fix it. I need to know how to put it together again as it has been awhile since I have had a chance to work on it. Can anyone tell me how to put the engine and water pump assembley together again?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I took my pressurewasher simoniz s1900 apart, i had to take off the pump and all oil leaked out.
how and where can i fill the oil in to the pump
and what type of oil would i use
thanx ernte

Posted on Sep 21, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 174 Answers

Danandpam:
E-mail me at firehead@rogers.com
I am sure I can help

Posted on Jun 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gun leaking when i use my simoniz 1900 pressure washer


The simoniz 1900 gun is very poorly designed. It is held together by a dozen small screws.

First open the gun by taking all the small screws out. No worries, it is much more simpler and worse constructed than a 5-year-old toy gun.

After opening the gun, you will see there are only two parts inside. One at the front connecting to the wand, and one at the back connecting to the hose. The trigger is looped over the joint part.

Make sure the back part is firmly fitted into the slot properly, otherwise it leaks. And be careful don't lose the spring, because there is no object to hold it in place.

Now all you need to do is to put all one dozen small screws back in. Don't over tight the screws, otherwise they will punch through the plastic cover.

Now your simoniz 1900 gun is fixed but it leaves you wonder which 10-year-old designed it?

Jul 30, 2012 | Honda Water Pump 2 Inch IntakeOutlet 5 Hp...

1 Answer

Can some tell me if they have a picture of the inside on the switch my fell apart need put back together?


If you click HERE you will be taken to a web page of part numbers and the exploded view diagram's of the area of the washer the parts is located in.

Dec 15, 2011 | Roper RAS8445KQ Top Load Washer

2 Answers

I would like to take apart my Simoniz pressure Washer


I have simoniz 1750 less than 2 years old it works,no leaks,but water is not coming out ,thank you for any tip.

Mar 31, 2010 | Garden

2 Answers

S1600 Simoniz gun - I took it apart and I have a spring left - where does it go? I need a schematic or something.


There are no schematics available because the manufacturer doesn't sell parts for the gun. The spring usually goes right into the end of the hose, then the little bullet like valve follows. Did you know you can buy a new gun for about $22.00 Canadian?

Aug 11, 2009 | Karcher Garden

1 Answer

Electric simoniz runs for a while than cuts off for awhile and st


Hello: Are you using and extension cord? You cannot, it will kill the motor. If this is not the problem it is the unloader valve sticking. This is quite a job to fix but can be done. Let me know.

Jul 01, 2009 | Honda Pressure Washer PSI 3000

1 Answer

Manual needed for Simoniz S1800 Pressure Washer


I contacted the Company in US.

Thank you for keeping in touch.

Jun 21, 2009 | Garden

1 Answer

Looking for Owners Manual for Simoniz S2600


Hi my simoniz electrc power washer will not go off when I release the trigger , leaks trough the water inlet hose , I replaced the O rings but keeps leaking ..THANKS

Apr 21, 2009 | Garden

2 Answers

Simoniz s1900 electric power washer with no water pressure


What a jacka$$ response.
Do you think its the seals? wow that describes f**Kall!!!

Aug 19, 2008 | Electrical Supplies

Not finding what you are looking for?
Garden Logo

Related Topics:

2,228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

roeb

Level 3 Expert

571 Answers

john h

Level 3 Expert

12650 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...