Question about Lexmark E450dn Laser Printer

Open Question

Remove print media - Lexmark E450dn Laser Printer

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a paper jam at the back of my printer, where do i open it


Hopefully this will help you. Good luck !

Causes of jams

NOTE If you are experiencing jams in the duplex paper path, make sure that the duplex-tray

lever is set to the correct media size for your country/region. Open the duplex-paper-path door

and look at the embossed arrow on the lever. Make sure that it points to the media size for your

country/region. If the size needs to be changed, push the lever all the way in for duplex printing

on letter- and legal-size media, or pull it all the way out for duplex printing on A4-size media.

A4

LTR,

LGL

A4

LTR,

LGL

Occasionally, paper or other print media can become jammed during a print job. Some causes include

the following events:

? The print media that is being used does not meet HP specifications.

? The media is damaged or has objects attached to it, such as staples or paper clips.

? The environment in which the print media was stored is too humid or too dry.

? The input trays are loaded incorrectly or overfilled, or the media guides are not set correctly.

? Too many sheets have accumulated in an output area, or sheets are blocking an output area.

? Media is added to or removed from an input tray during a print job or an input tray is removed from

the all-in-one during a print job.

? The cartridge door is opened during a print job.
ENWW

Mar 13, 2015 | HP LaserJet 3300 All-In-One Printer

1 Answer

Jam in top 3015d


Sir/Madam

Occasionally, media becomes jammed during a print job. An error in the software program and a jam message on the printer control panel display indicate a media jam. To prevent a jam, see the following instructions:
  • Only print on media that meets HP specifications.
  • Only print on media that is not wrinkled, folded, or damaged.
  • Make sure that the printer is clean.
  • Make sure that the input trays are loaded properly and are not too full. See the start guide for more information about loading input trays.
When adding new media, always remove all of the media from the input tray and straighten the stack of new media. This helps prevent multiple sheets of media from feeding through the printer at one time, which reduces media jams

Clearing a media jam


CAUTION: Media jams might result in loose toner on the page. Use cold water to wash toner off of clothes, as hot water will permanently set the toner into fabric. To remove toner from hands, wash hands in cold water.
CAUTION: Do not use a sharp object, such as a pencil or scissors, to remove jammed media.
NOTE: When clearing jams, including jams in the output bin, always push the print-cartridge-door release to open the top cover, and remove the print cartridge. Keep the top cover open and the cartridge out until the jam has been cleared. Opening the top cover and removing the print cartridge relieves tension on the printer rollers, which makes removing jammed pages easier.


Push the print-cartridge-door release and open the top cover.
Figure 1: Pushing release and opening top cover

3f0c0681-aab8-41b1-8ccc-edbc8d10b083.gif

Grasp the handle of the print cartridge and remove it. Set it aside.
Figure 2: Removing print cartridge


1135f64a-e54d-412a-a38c-2d53092ee8b0.gif

CAUTION: To prevent damage to the print cartridge, do not expose it to light any longer than necessary. Place the print cartridge in a paper bag or other opaque container until it can be placed back in the printer.

With both hands, grasp the side of the media that is most visible (this includes the middle), and carefully pull it free from the device.
Figure 3: Jammed media most visible


38cea87e-25d6-4cfb-86b2-bbc3d933d279.gif

When the jammed media is removed from this area, replace the print cartridge.
Figure 4: Replacing printer cartridge


47beeaaf-6bbe-4681-9d09-8b877270789e.gif
Press the supporting springs, and close the top cover.
Open the media input tray and remove any media from the tray.

359bf88b-3c84-4de1-861e-08b6fe39b01f.gif
Slide the media guides inward as far as they will go. Press and hold down the tabs inside the media input tray, and slide the media input tray out of the printer.
Figure 6: Removing media input tray


92329010-15d2-4a56-a894-eacfba561eac.gif

With both hands, grasp the side of the media that is most visible (this includes the middle), and carefully pull it free from the device.
Replace the input tray into the device.
Figure 7: Replacing input tray


141b20dd-a71b-4e53-86c1-b5e589fa0d60.gif

After clearing the media jam, it may be necessary to shut down the printer, and then turn it on again.

NOTE: To add new media, remove all of the media from the input tray, straighten the stack of media after adding the new media, and then place the stack in the tray.
Clearing other media jams
CAUTION: Do not use a sharp object, such as a pencil or scissors, to remove jammed media.
If the media has jammed where it exits the printer, grasp the leading edge of the media and pull the media out through the output bin.
Figure 8: Removing jammed media from output bin


b9b1737a-16cc-4bd2-b9a7-77bad78ef641.gif

NOTE: If the printer is shut off before clearing the media jam, turn it on again, and then restart the printing or copying job.
Tips to avoid media jams
Make sure the automatic document feeder (ADF) media lever is in the correct position for the media being used. Slide it to the single-sheet setting (to the right) when scanning on thick media. Slide it to the multiple-sheet setting (to the left) when scanning on regular media.
Make sure that the input tray is not overfilled. The input tray capacity varies depending on the type of print media that is used.
Check that the input tray is securely in place.
Do not add print media into the input tray while the printer is printing.
Use only HP-recommended media types.
Do not let print media stack up in the output bin. The print media type and the amount of toner used affect the output bin capacity.
Check the power connection. Make sure that the power cord is firmly connected to both the device and the power supply box. Plug the power cord into a grounded AC power outlet.
Media jams occur in the automatic document feeder (ADF)

Occasionally, media becomes jammed during a copy, scan, or fax job.

A software error message indicates a media jam, and the Doc feeder jam Clear, Reload message appears on the printer control panel display to indicate a jam.
  • The ADF input tray is loaded incorrectly or is too full.
  • The media does not meet HP specifications.
Typical automatic document feeder (ADF) jam locations Input tray areas: If the page is sticking out of the input tray, try to remove it gently from the input tray without tearing the page.
Figure 9: Removing jammed media from input tray


ec9c59d7-7daf-42c3-ba56-dc15042f3605.gif

Output paths: If the page is sticking out of the output bin, try to remove it gently without tearing the page.
Figure 10: Removing jammed media from output bin


e710c656-d551-4439-940d-878a82196f67.gif

  • Intermediate location: If the page is sticking out of the input tray and into the output area, see "To clear a media jam from the automatic document feeder (ADF)" below for instructions.

Automatic document feeder (ADF) media lever If a thick media is being used, slide the media lever to the single-sheet setting (to the right). Load a single sheet of media into the ADF.
When the copying, scanning, or faxing jobs are complete, slide the ADF media lever back to the multiple-sheet setting (to the left).
Clearing a media jam from the automatic document feeder (ADF)
  1. Using both hands, pull the printer control panel door toward you.
    Figure 11: Opening printer control panel door.
c5ce49eb-752a-4d44-bf67-99b4b9a44cc5.gif

  1. Remove any jammed media. Figure 12: Removing media
0cf6dfd4-a8b2-4153-8e19-52b3105abfda.gif

NOTE: Use only your hands to remove jammed media. Using other objects can damage internal parts.
Make sure that all of the pieces of media are removed, and then close the printer control panel door.
Figure 13: Closing printer control panel door


375c734d-e4be-4fed-b8ec-47628408dd9f.gif

I Hope Your HP Printer Problem Resolved By Now,In Case You still Having HP Printer Problem Then Visit Official HP Printer Website Below Link URL:

HP Printer Issue:
HP Support document HP Support Center

Or

If You still need HP Printer assistance Then Follow Us On :


HP Printer Support

Feb 13, 2014 | HP LaserJet Enterprise P3015d BW laser...

1 Answer

When I copy to photo paper it reduces automatically, why


Print on special and custom-sized media
To print on special or custom-sized media (Windows)
1. Load the appropriate media. For more information, see Load media.
2. With a document open, click Print on the File menu, and then click Setup,
Properties, or Preferences.
3. Click the Paper/Features tab.
4. Select the media size from the Size is drop-down list.
To set a custom media size:
a. Click the Custom button.
b. Type a name for the new custom size.
c. In the Width and Height boxes, type the dimensions, and then click Save.
d. Click OK twice to close the properties or preferences dialog box. Open the
dialog box again.
e. Select the new custom size.
5. To select the media type:
a. Click More in the Type is drop-down list.
b. Click the desired media type, and then click OK.
6. Select the media source from the Source is drop-down list.
7. Change any other settings, and then click OK.
8. Print your document.
To print on special or custom-sized media (Mac OS)
1. Load the appropriate media. For more information, see Load media.
2. On the File menu, click Page Setup.
Chapter 2
28 Use the device
3. Verify that the correct printer is selected.
4. Select the media size.
5. To set a custom media size:
a. Click Manage Custom Sizes in the Paper Size pull-down menu.
b. Click New and type a name for the size in the Paper Size Name box.
c. In the Width and Height boxes, type the dimensions and set the margins, if
desired.
d. Click Done or OK, and then click Save.
6. On the File menu, click Page Setup, and then select the new custom size.
7. Click OK.
8. On the File menu, click Print.
9. Open the Paper Handling panel.
10. Under Destination Paper Size, click the Scale to fit paper size button, and then
select the customized paper size.
11. Change any other desired settings, and then click OK or Print.
Print borderless
Borderless printing lets you print to the edges of certain media types and a range of
standard media sizes.
NOTE: Open the file in a software application and assign the image size. Make
sure the size corresponds to the media size on which you are printing the image.
You can also gain access to this feature from the Printing Shortcuts tab. Open
the printer driver, select the Printing Shortcuts tab, and select the printing
shortcut for this print job drop-down list.
NOTE: Borderless printing is not supported on plain media.
To print a borderless document (Windows)
1. Load the appropriate media. For more information, see Load media.
2. Open the file that you want to print.
3. From the application, open the print driver:
a. Click File, and then click Print.
b. Click Properties or Setup.
4. Click the Paper/Quality tab.
5. Select the media size from the Size is drop-down list.
6. Select the Borderless Printing check box.
7. Select the media source from the Source is drop-down list.
8. Select the media type from the Type is drop-down list.
NOTE: Borderless printing is not supported on plain media.
Print borderless 29
9. If you are printing photos, select Best from the Print Quality drop-down list.
Alternatively, select Maximum dpi, which provides up to 4800 x 1200 optimized
dpi* for optimum print quality.
*Up to 4800 x 1200 optimized dpi for color printing and 1200 input dpi. This setting
might temporarily use a large amount of hard disk space (400 MB or more) and will
print more slowly.
10. Change any other print settings, and then click OK.
11. Print the document.
12. If you printed on photo media with a tear-off tab, remove the tab to make the
document completely borderless.
Change settings from an application for current jobs (Windows)
To change the settings
1. Open the document that you want to print.
2. On the File menu, click Print, and then click Setup, Properties, or Preferences.
(Specific options may vary depending on the application that you are using.)
3. Change the settings that you want, and then click OK, Print, or a similar command.
Change default settings for all future jobs (Windows)
To change the settings
1. Click Start, point to Settings, and then click Printers or Printers and Faxes.
- Or -
Click Start, click Control Panel, and then double-click Printers.
2. Right-click the printer icon, and then click Properties, Document Defaults, or
Printing Preferences.
3. Change the settings that you want, and then click OK.

NOTE: Borderless printing is not supported on plain media.
9. If you are printing photos, select Best from the Quality drop-down list.
Alternatively, select Maximum dpi, which provides up to 4800 x 1200 optimized
dpi*.
*Up to 4800 x 1200 optimized dpi for color printing and 1200 input dpi. This setting
might temporarily use a large amount of hard disk space (400 MB or more) and will
print more slowly.
10. Select the media source. If you are printing on thick or photo media, select the
manual feed option.
11. Change any other print settings, and then click Print.
12. If you printed on photo media with a tear-off tab, remove the tab to make the
document completely borderless

Nov 04, 2011 | HP J4680 Office Jet All-In-One Printer

1 Answer

LOCATION OF PRINTER SENSOR


Jams

Clearing jams

CAUTION Do not use sharp objects, such as tweezers or needle nose pliers, to remove jams.
Damage caused by sharp objects will not be covered by the warranty.

CAUTION Always pull jammed media in the direction it would travel through the paper path.
Do not pull jammed media against the direction of travel through the paper path to avoid damage
to the printer.

To prevent damage to the printer when clearing jams, including jams in the output bin, always open the
print-cartridge door and remove the print cartridge. Keep the door open and the cartridge out until the
jam has been cleared. Opening the print-cartridge door and removing the print cartridge relieves tension
on the printer rollers, which prevents damage to the printer and makes the removal of jammed pages
easier.

Occasionally, media becomes jammed during a print job. You are notified of a media jam by an error
from the software and the printer control panel lights. See Control-panel lights (HP LaserJet 1010 series
printers) on page 102 or Control-panel lights (HP LaserJet 1020 printer) on page 106.

The following are some of the causes of media jams:

?

The input trays are loaded improperly or are too full. See Loading media on page 25.

NOTE When you add new media, always remove all of the media from the input tray and
straighten the stack of new media. This helps prevent multiple sheets of media from feeding
through the printer at one time, reducing media jams.

The media does not meet HP specifications. See Media specifications on page 21.

?

Typical media jam locations

?

?

?

Print cartridge area: See Removing a jammed page on page 43.

Input tray area: If the page is still sticking out of the input tray, gently try to remove it from the input
tray without tearing the page. If you feel resistance, see Removing a jammed page on page 43.

Output path: If the page is sticking out of the output bin, see Removing a jammed page


NOTE There might be loose toner in the printer after a media jam. This toner clears up after
a few sheets are printed.

Removing a jammed page

Use the procedures in this section to remove a jam.

CAUTION Media jams might result in loose toner on the page. If you get any toner on your
clothes, wash them in cold water. Hot water will permanently set the toner into the fabric.


Partshere Troubleshooting

CAUTION To prevent damage to the printer when clearing jams, including jams in the output
bin, always open the print cartridge door and remove the print cartridge.

To prevent damage to the print cartridge, minimize its exposure to direct light. Cover the print
cartridge with a sheet of paper.

NOTE The following illustrations show the HP LaserJet 1020 printer. The same procedure is
used to remove a jam in the HP LaserJet 1010 series printers.

1

Open the print cartridge door, and remove the print cartridge.

2

Grasp the middle edge of the side of the media that is most visible, and carefully pull it free from
the printer.

CAUTION Do not use sharp objects, such as tweezers or needle nose pliers, to remove
jams. Damage caused by sharp objects will not be covered by the warranty.

CAUTION Always pull jammed media in the direction it would travel through the paper path.
Do not forcefully pull jammed media against the direction of travel through the paper path to
avoid damage to the printer.


3

When you have removed the jammed media, replace the print cartridge, and close the print cartridge
door.

After clearing a media jam, you might need to turn the printer off then on again.

NOTE When you add new media, remove all of the media from the input tray and straighten
the stack of new media.

Sep 25, 2011 | HP LaserJet 1020 Printer

1 Answer

Jam cartrige Area


Clear jams from the print-cartridge area




1. Open the print-cartridge door, and remove the print cartridge.
Figure 18: removing print cartridge





2. With both hands, grasp the side of the media that is most visible (this includes the middle), and carefully pull it free from the product.
Figure 19: removing jammed media


3. Replace the print cartridge and close the print-cartridge door.
Figure 20: reinstalling the print cartridge



For any other Jam types Visit the following link : HP Lasterjet M1522

Regards,
Shrey

May 30, 2011 | HP LaserJet M1522nf Multifunction Printer...

1 Answer

My printer has a problem picking up the paper and moving through the rollers in the back.


Paper does not feed

into the machine.

• Remove any obstructions from inside the

machine.

• Paper has not been loaded correctly. Remove

paper from the tray and reload it correctly.

• There is too much paper in the tray. Remove

excess paper from the tray.

• The paper is too thick. Use only paper that

meets the specifications required by the

machine.

SELECTING PRINT MEDIA

You can print on a variety of print media, such as plain paper, envelopes,

labels, and transparencies. Always use print media that meet the guidelines

for use with your machine. Print media that does not meet the guidelines

outlined in this user's guide may cause the following problems:

• Poor print quality

• Increased paper jams

• Premature wear on the machine.

Properties, such as weight, composition, grain, and moisture content, are

important factors that affect the machine's performance and the output

quality. When you choose print materials, consider the following:

• The type, size and weight of the print media for your machine are

described later in this section.

• Desired outcome: The print media you choose should be appropriate for

your project.

• Brightness: Some print media are whiter than others and produce

sharper, more vibrant images.

• Surface smoothness: The smoothness of the print media affects how

crisp the printing looks on the paper.

• Some print media may meet all of the guidelines in this section and

still not produce satisfactory results. This may be the result of

improper handling, unacceptable temperature and humidity levels,

or other variables over which Samsung has no control.

• Before purchasing large quantities of print media, ensure that it

meets the requirements specified in this user's guide.

Using print media that does not meet these specifications may cause

problems, requiring repairs. Such repairs are not covered by

Samsung's warranty or service agreements.

Make sure not to use the inkjet photo paper with this machine. It could
cause damage to the machine.

May 16, 2011 | Samsung CLP 300 Laser Printer

1 Answer

When i give print command the paper was jammed in printer.


The following sections describe how to load media into the different input trays. CAUTION: If you try to print on media that is wrinkled, folded, or damaged in any way, a jam might occur. Priority feed slot The priority feed slot holds one sheet of media up to 163 g/m2 (43 lb) or one envelope, transparency, or cardstock. Load media with the top forward and the side to be printed facing up. To prevent jams and skewing, always adjust the side media guides before feeding the media. Back to top 150-sheet main input tray The input tray holds up to 150 pages of 75 g/m2 (20 lb) paper or fewer pages of heavier media of 25 mm (0.9 inches) or less stack height. Load media with the top forward and the side to be printed facing up. To prevent jams and skewing, always adjust the side and front media guides. NOTE: When you add new media, make sure that you remove all of the media from the input tray and straighten the stack of new media. This helps prevent multiple sheets of media from feeding through the printer at one time, reducing media jams.


Also go to this link to do a Printer Cleaning


Dec 03, 2010 | HP LaserJet 1020 Printer

1 Answer

Green light flashing wont print


Many possible issues:
1) the cover is open (close cover)
2) Out of paper (add paper)
3) printer can't pick up media (change media, change printer print mode setting or paper type selection)
4) Paper jam (remove all media from the paper trays, press the power button once, remove the back cover and pull the jammed paper from that point then close the cover, reload the paper and try to print)
5) Problem with the cartridge (remove the cartridges and then reinsert them, try a cleaning cycle. Alternatively manually clean the cartridges (remove them from the printer and power down and unplug the unit). Use distilled or bottled water and cotton swabs. Slightly moisten the swab and wipe the face, edges of the cartridges - do not touch the contacts or nozzles. Wipe down the underside of the print cartridge cradle walls. Reinsert the cartridges, close the cover and power up the unit. Calibrate the cartridges. If this doesn't help, replace the cartridges.)
6) Loss of electrical contact between the carriage connections (press and hold the power button and open and close the top cover 4 times. Look at the resulting self-test print out. Remove and reinsert the cartridges and try to print. Next clean the cartridges and cartridge cradle as above. Replace the cartridges.)

I hope one of these solutions work. Otherwise the printer needs service.

Cindy Wells

Aug 05, 2010 | HP DeskJet 3650 InkJet Printer

3 Answers

PAPER JAM ERROR 201.02


if you are gettiing a 201 error without any paper in the printer you will need change the main motor drive if it fails to initialize this is the error that will show up and there is no other way to reset it

Mar 20, 2009 | Lexmark T640 Laser Printer

1 Answer

Paper jam HP Laserjet 3050z


Open tray 1 and pull any visible jammed media out of the all-in-one.
If no media is visible, open the print-cartridge door, remove the print cartridge, and rotate the
upper media guide. Carefully pull the media up and out of the all-in-one.
Close tray 1.

Aug 26, 2008 | HP LaserJet 3050 All-In-One Printer

Not finding what you are looking for?
Lexmark E450dn Laser Printer Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...