Question about Computers & Internet

1 Answer

How to change default password of netgear93 - Computers & Internet

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 23 Answers

While connected to the router open a browser window and enter the i.p. address that is printed on the route casing (it may be on the bottom). There should also be a default password and id printed on the router as well. Use this to enter the setup program you will reach via the ip address. The id is often entered next to "Administrator: " Once in the setup program there is a section where the password and id can be changed. You will need to tell your laptop/pc/phone etc that uses the router wifi what the new password is so you can continue to use the router.

Posted on Dec 25, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Netgear93 network security key?


Windows Network Settings
Connect to Home Group and u will get a net password

Nov 20, 2016 | Computers & Internet

1 Answer

How do you change your wifi password


Follow the steps one by one:
1.Open a browser window.
2.Type in the IP address for the modem 192.168.0.1.
3.Type in the default Username: admin.
4.Type in the default Password: motorola.
5.Type in your new username in the Password Change Username field.
6.Type in your new password in the New Password field.
7.Re-enter your new password.
8.Retype your new username in the Current Username Password field.
9.Click Apply.
10.Write down your new password and default password for future reference.

Jan 21, 2014 | Arris SURFboard Gateway SBG6580 DOCSIS 3.0...

1 Answer

Micromax mobile default password


Reset the device to default settings and reconfigure the SSID and Security Key.

May 02, 2013 | Computers & Internet

1 Answer

WRT310N


Hello I found the following info about the default settings on your router (you can reset your settings to the default ones by pressing the reset button on your router or the back of your router device):
Link is: http://pcsupport.about.com/od/linksys-default-passwords/a/wrt310n-default-password.htm

WRT310N Default Password & Other Default Login Data Version Default Username Default Password Default IP Privileges All [none] admin 192.168.1.1 Administrator

Jan 28, 2012 | Linksys WRT Computers & Internet

2 Answers

Forgot my password for wrt120n


Looking for the Linksys WRT120N default password? You probably have little reason to access your router on a regular basis so don't feel too bad if you've forgotten the WRT120N default password.

However, when you're troubleshooting a network problem and need to get in to the device, the WRT120N default password suddenly becomes very important.

For most versions of the Linksys WRT120N, the default password is admin. As with most passwords, the WRT120N default password is case sensitive.

In addition to the WRT120N default password, you can also see the WRT120N default username and WRT120N default IP address in the table below.

Note: The Linksys WRT120N default password may be different for certain hardware orfirmware versions.

If I have that information, I'll include the exact WRT120N version number along with the correct default password. You can usually find your Linksys WRT120N version number on the bottom of the router.

Be sure to change the default router password on your WRT120N to something more secure as soon as you're in. Then use a free password manager so you'll never forget your new WRT120N password.
Help! The WRT120N Default Password Doesn't Work!

At some point during the life of your particular Cisco Linksys WRT120N, the default password, username, and/or IP address might have been changed.

In most cases, if the Linksys WRT120N default IP address has been changed, the new IP address for the WRT120N will be the same as the default gateway IP address configured for your network connection.

See How To Find the Default Gateway IP Address for help.

In situations where the WRT120N default password or WRT120N default username has changed, you'll need to reset the Linksys WRT120N to factory defaults. You can usually do that via a special button or sequence of actions.

The WRT120N manual will have specific directions for performing a factory default reset. You can download the manual for the WRT120N from Linksys Support.

Please let me know if any of the WRT120N default login data below needs updated. For other questions about the WRT120N default information on this page, see my Default Password FAQ.
WRT120N Default Password & Other Default Login DataVersionDefault UsernameDefault PasswordDefault IPPrivilegesAll[none]admin192.168.1.1Administrator

Jan 13, 2012 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

How do I change the pin number on my PSP? I have forgotten what I used :-)


Forgetting your PlayStation Portable password can be frustrating; it can limit how much you can do with your PSP device and disallow you to make changes to your settings. Here are some tips to changing your PSP password so that you can remember it and enjoy your PSP to its full extent.

1. To change your PSP password, you must first restore the default settings of your PSP.

2. From your welcome screen, choose "Settings." Under settings, choose "Restore Default Settings."

3.When you choose to restore the default settings, your password will be set back to the default password, which is 0000.

4. Return to the "Settings," and choose "Change Password." If you remembered your old password, you could enter it now, but if you've restored the default settings, enter in 0000 when the PSP prompts for your password.

5. You now have access to change your password to anything you'd like. Enter your chosen numbers and save them.

I hope you find it very helpful.
Thank you for choosing fixya.

Aug 11, 2011 | Sony PlayStation Portable (PSP) Console

1 Answer

I have the first firefly phone from att&t then cincular i am needing to reset password and don't remember the code to do that.


For the Original Firefly Phone:
The default PIN is: 1 2 3 4.

For the glowPhone:
The default Password is: 0 0 0 0
When you first set up your password, you will be able to change from the 0 0 0 0 and enter your own.
If you should happen to forget what password you entered, you can enter the bypass password: 5 6 7 8 and this will then allow you to go into Parental Controls and change your password:
- Scroll to and select Permissions
- Scroll to and select Change Password
You will be prompted to enter a new password, then reaffirm it. You will get a confirmation when the password is successfully changed.

For the flyPhone:
The default password is: 1 2 3 4
When you first set up your password, you will be able to change from the 1 2 3 4 and enter you own.
If you should happen to forget what password you entered, you will need to follow these steps:
- Turn on your flyPhone
- From the Main Firefly Screen, you will need to type in the following (once you start typing, the screen will change): #20070330#
This will restore your flyPhone back to the default settings, so you can now go back in and reset your password.

or try this:
How can I change my phone's Password/PIN? For the Original Firefly Phone:
- Press and hold the green SEND button until you see ENTER PIN. Press Enter.

- Enter your PIN Number by scrolling though and accepting the four numbers you choose. (The default PIN is 1 2 3 4).

- Scroll to DONE and Press OK.

- If your PIN numbers are accepted, the display will say Change PIN.

- Press OK to let Firefly know that you do want to change that PIN.

When the display panel says SAVED, your new PIN is loaded.


For the glowPhone:
The default Password is: 0 0 0 0
When you first set up your password, you will be able to change from the 0 0 0 0 and enter your own.
If you should happen to forget what password you entered, you can enter the bypass password: 5 6 7 8 and this will then allow you to go into Parental Controls and change your password:
- Scroll to and select Permissions
- Scroll to and select Change Password
You will be prompted to enter a new password, then reaffirm it. You will get a confirmation when the password is successfully changed.



For the flyPhone:
The default password is: 1 2 3 4
When you first set up your password, you will be able to change from the 1 2 3 4 and enter you own.
If you should happen to forget what password you entered, you will need to follow these steps:
- Turn on your flyPhone
- From the Main Firefly Screen, you will need to type in the following (once you start typing, the screen will change): #20070330#
This will restore your flyPhone back to the default settings, so you can now go back in and reset your password.

Hope this helped.

Source: http://www.fireflymobile.com/

Jan 05, 2011 | FireFly Cellular Phone

2 Answers

Default factory password


Most of the NETGEAR devices, except ReadyNAS products and Fully Managed switches, have the following default username and password:
  • Username = admin
  • Password = password
    • For older devices, password = 1234
If you have changed the default password and have forgotten it, you will need to reset the NETGEAR device to factory default settings in order to use the default username and password. Click here to learn how to reset the NETGEAR device to factory default settings. Please note: restoring a device to its factory default settings will erase any changes you have saved to the device.

This applies to:
  • Most of the NETGEAR devices such as routers and smart switches.

Aug 13, 2010 | Cell Phones

2 Answers

Reset password


What password are you referring to; Wireless Security or Web password to access the Router's interface?

If it's the 2nd; Open http://192.168.0.1 (default IP) on your web browser, type username: admin and Password: password. Click on Password then change the default password.

If it's the 1st; Open http://192.168.0.1 (default IP) on your web browser, type username: admin and Password: password (put you correct password if you change the default password).. Click Wireless on the left, Enable Encryption WEP or WPA; for WEP 64 bit you will have to use 10 HEX, meaning 0-9, A-F (e.g. common is phone number). If WPA; password can be set from 8-64 characters long.

Angel .

Jun 30, 2010 | Trendware TRENDnet TEW-435BRM 802.11g...

2 Answers

I am trying to configure a netgear wgt624 v3 router. I can't get passed the admin and password. Please help me configure this


Most of the NETGEAR devices, except ReadyNAS products and Fully Managed switches, have the following default username and password:
  • Username = admin
  • Password = password
    • For older devices, password = 1234
If you have changed the default password and have forgotten it, you will need to reset the NETGEAR device to factory default settings in order to use the default username and password. Click here to learn how to reset the NETGEAR device to factory default settings. Please note: restoring a device to its factory default settings will erase any changes you have saved to the device.

Feb 12, 2010 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

327 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...